關(guān)于FPGA的小疑問Using cable "USB-Blaster [USB-0]", device 1, instance

ID:501862 · 發(fā)表于 2021-6-8 10:32

Using cable "USB-Blaster [USB-0]", device 1, instance 0x00
Pausing target processor: not responding.
Resetting and trying again: FAILED
Leaving target processor paused

做sopc時做到軟件部分了，把軟件下到板子里面就報這個錯，改了半天也不對，幫忙看看吧

ID:501862 · 發(fā)表于 2021-6-8 18:37

幫忙看看吧-.-

帳號		自動登錄	找回密碼
密碼			立即注冊