国产精品亚洲香蕉第五区,日韩爆乳护士中文字幕,最新国产在线AⅤ精品

/*******************************************************************************
* 標題: 基于SIM900A的自動充電提醒以及實時查詢電量裝置 *
* 時間 2018年10月10日16:12:42 *
* *
* 實驗說明：本裝置的核心是SIM900A模塊，需要調用SIM900A指令。本原理圖中ADC0832 *
的參考電壓為5V,由7805穩壓源提供7805的電源以及參考電壓。檢測電池的電壓在9-15V之 *
間，采用分壓方式，一個30K,一個10K電阻進行分壓。假如檢測電壓為15V,則輸入ADC0832 *
的電壓為5V。依次類推。 *
*
********************************************************************************
* 實驗心得：SIM900A是個難點，需要在電腦上進行調試。ADC0832進行AD轉化的時候，需 *
要研究下時序圖，在進行數據檢測的時候需要進行兩次檢測，如果前后兩次數據相等，那 *
么再返回得到的值，減少了測量誤差。7805穩壓源是個重要的部件，為了提供精確穩定的 *
5V參考電壓 *
********************************************************************************/
#include <reg51.h>
#include "UART.h"
#include "DELAY.h"
#include "define.h"
#include "ADC0832.h"
//全局變量
#define Yes 1
#define No 0
typedef unsigned int u16;
typedef unsigned char u8;
unsigned char number[11]={'0','0','0','0','0','0','0','0','0','0','0'};
unsigned char Voltage_bit; //對電壓進行AD轉化后的數字信號，5V為參考電壓，此時Voltage_bit=256;
float Percentage; //電量百分比，Percentage = Voltage/256;
/********測試GSM是否啟動**********/
int test_boot;
/********測試GSM是否注冊網絡**********/
int test_net_register;
/********測試是否有電話打入**********/
int test_have_call;
/********測試是否有信息發入**********/
int test_have_SM;
/********GSM串口接收數據緩存**********/
unsigned char GSM_receive[60];
/********GSM串口接收計數器**********/
unsigned char GSMDATA_count;
/********號碼緩存*******************/
/********短信發送程序********/
//IO口定義
sbit K1 = P2^0;
sbit K2 = P2^1;
sbit Powerkey = P2^2;
sbit beep = P1^5;
//短信發送程序
void message()
{
Send_String("AT+CMGF=1\r\n");//指定信息的輸入輸出格式為文本格式
Delay_Ms(100);
Send_String("AT+CSMP=17,167,2,25\r\n"); //
Delay_Ms(100);
Send_String("AT+CSCS=\"UCS2\"\r\n"); //設置為 UCS2 字符集編碼
Delay_Ms(100);
Send_String("AT+CMGS=\"00310038003800380038003600340035003000300033\"\r\n"); //號碼18888645003的Unicode編碼，0031 0038 0038 0038 0038 0036 0034 0035 0030 0030 0033
Delay_Ms(100);
Send_String("4E3B4EBAFF0C53C889C197625566\r\n"); //主人，又見面啦 4E3B 4EBA FF0C 53C8 89C1 9762 5566
Delay_Ms(100);
Send_Char(0x1A); //結束命令符號
Delay_Ms(200);
}
void Phonemessage()
{
Send_String("AT+CMGF=1\r\n");//指定信息的輸入輸出格式為文本格式
Delay_Ms(100);
Send_String("AT+CSMP=17,167,2,25\r\n"); //
Delay_Ms(100);
Send_String("AT+CSCS=\"UCS2\"\r\n"); //設置為 UCS2 字符集編碼
Delay_Ms(100);
Send_String("AT+CMGS=\"00310038003800380038003600340035003000300033\"\r\n"); //號碼18888645003的Unicode編碼，0031 0038 0038 0038 0038 0036 0034 0035 0030 0030 0033
Delay_Ms(100);
Send_String("4E3B4EBAFF0C62116536523075358BDD5566\r\n"); //主人，我收到電話啦 4E3B 4EBA FF0C 6211 6536 5230 7535 8BDD 5566
Delay_Ms(100);
Send_Char(0x1A); //結束命令符號
Delay_Ms(200);
}
void othermessage()
{
Send_String("AT+CMGF=1\r\n");//指定信息的輸入輸出格式為文本格式
Delay_Ms(100);
Send_String("AT+CSMP=17,167,2,25\r\n"); //
Delay_Ms(100);
Send_String("AT+CSCS=\"UCS2\"\r\n"); //設置為 UCS2 字符集編碼
Delay_Ms(100);
Send_String("AT+CMGS=\"00310038003800380038003600340035003000300033\"\r\n"); //號碼18888645003的Unicode編碼，0031 0038 0038 0038 0038 0036 0034 0035 0030 0030 0033
Delay_Ms(100);
/*Send_String("00560065006E00630065002C6211653652304F60768477ED4FE15566\r\n"); //主人，我收到電話啦 4E3B 4EBA FF0C 6211 6536 5230 7535 8BDD 5566
Delay_Ms(100);
Send_Char(0x1A); //結束命令符號
Delay_Ms(200);*/
}
void delay(u16 i)
{
while(i--);
}
void main()
{
unsigned char j=0;
test_boot = No;
Powerkey = 0;
test_have_call=No;
test_have_SM = No;
//GSM啟動
Powerkey=1;
Delay_Ms(1000); //系統重啟在開機和關機之間的間隔要大于800ms.
Powerkey=0;
Uart_Init();
while(test_boot==No)
{
Send_String("AT\r\n"); //如果開機成功，則會返回一個OK,進入串口中斷
Delay_Ms(1000);
}
Send_String("AT+CLIP=1\r\n");
Delay_Ms(100);
while(1)
{
Voltage_bit = ADC0832(0); //從ADC轉化通道0進入，模數轉化后的值為Voltage_bit;
Percentage = (float)Voltage_bit/256; //電量百分比轉化語句
j = 0;
if(K1==0)
{
while(j==0)
{
message();
j=1;
}
}
if(K2==0)
{
while(j==0)
{
othermessage();
j=1;
}
}
while(test_have_call==Yes)
{
if(number[10]=='3'&&number[9]=='0'&&number[8]=='0'&&number[7]=='5')
Phonemessage();
break;
}
if(test_have_SM == Yes)
{
//Send_String("AT+CMGR=1\r\n");
//if(GSM_receive[69]=='7'&&GSM_receive[70]=='5'&&GSM_receive[71]=='3'&&GSM_receive[72]=='5')
//{
Send_String("AT+CMGD=1\r\n");
if(Percentage<=0.1)
{
othermessage();
Send_String("00560065006E00630065002C73B05728753591CF5C114E8E003100300025\r\n"); //Vence，電量少于10%
Delay_Ms(100);
Send_Char(0x1A); //結束命令符號
Delay_Ms(200);
test_have_SM = No;
}
if(Percentage>0.1&&Percentage<=0.2)
{
othermessage();
Send_String("00560065006E00630065002C73B05728753591CF5C114E8E003200300025\r\n"); //Vence，電量少于20%
Delay_Ms(100);
Send_Char(0x1A); //結束命令符號
Delay_Ms(200);
test_have_SM = No;
Send_String("AT+CMGD=1,4\r\n");
}
if(Percentage>0.2&&Percentage<=0.3)
{
othermessage();
Send_String("00560065006E00630065002C73B05728753591CF5C114E8E003300300025\r\n"); //Vence，電量少于30%
Delay_Ms(100);
Send_Char(0x1A); //結束命令符號
Delay_Ms(200);
test_have_SM = No;
Send_String("AT+CMGD=1,4\r\n");
}
if(Percentage>0.3&&Percentage<=0.4)
{
othermessage();
Send_String("00560065006E00630065002C73B05728753591CF5C114E8E003400300025\r\n"); //Vence，電量少于40%
Delay_Ms(100);
Send_Char(0x1A); //結束命令符號
Delay_Ms(200);
test_have_SM = No;
Send_String("AT+CMGD=1,4\r\n");
}
if(Percentage>0.4&&Percentage<=0.5)
{
othermessage();
Send_String("00560065006E00630065002C73B05728753591CF5C114E8E003500300025\r\n"); //Vence，電量少于50%
Delay_Ms(100);
Send_Char(0x1A); //結束命令符號
Delay_Ms(200);
test_have_SM = No;
Send_String("AT+CMGD=1,4\r\n");
}
if(Percentage>0.5&&Percentage<=0.6)
{
othermessage();
Send_String("00560065006E00630065002C73B05728753591CF5C114E8E003600300025\r\n"); //Vence，電量少于60%
Delay_Ms(100);
Send_Char(0x1A); //結束命令符號
Delay_Ms(200);
test_have_SM = No;
Send_String("AT+CMGD=1,4\r\n");
}
if(Percentage>0.6&&Percentage<=0.7)
{
othermessage();
Send_String("00560065006E00630065002C73B05728753591CF5C114E8E003700300025\r\n"); //Vence，電量少于70%
Delay_Ms(100);
Send_Char(0x1A); //結束命令符號
Delay_Ms(200);
test_have_SM = No;
Send_String("AT+CMGD=1,4\r\n");
}
if(Percentage>0.7&&Percentage<=0.8)
{
othermessage();
Send_String("00560065006E00630065002C73B05728753591CF5C114E8E003800300025\r\n"); //Vence，電量少于80%
Delay_Ms(100);
Send_Char(0x1A); //結束命令符號
Delay_Ms(200);
test_have_SM = No;
Send_String("AT+CMGD=1,4\r\n");
}
if(Percentage>0.8&&Percentage<=0.9)
{
othermessage();
Send_String("00560065006E00630065002C73B05728753591CF5C114E8E003900300025\r\n"); //Vence，電量少于90%
Delay_Ms(100);
Send_Char(0x1A); //結束命令符號
Delay_Ms(200);
test_have_SM = No;
Send_String("AT+CMGD=1,4\r\n");
}
if(Percentage>0.9&&Percentage<1)
{
othermessage();
Send_String("00560065006E00630065002C73B05728753591CF5C114E8E0031003000300025\r\n"); //Vence，電量少于100%
Delay_Ms(100);
Send_Char(0x1A); //結束命令符號
Delay_Ms(200);
test_have_SM = No;
Send_String("AT+CMGD=1,4\r\n");
}
if(Percentage==1)
{
othermessage();
Send_String("00560065006E00630065002C73B05728753591CF4E3A0031003000300025\r\n"); //Vence，電量為100%
Delay_Ms(100);
Send_Char(0x1A); //結束命令符號
Delay_Ms(200);
test_have_SM = No;
Send_String("AT+CMGD=1,4\r\n");
}
//}
}
}
}
/****************************************************************************/
void uart(void) interrupt 4
{
unsigned char UART_data;
unsigned char i;
if(RI)
{
UART_data=SBUF;
if(UART_data=='\n')
{
if(GSM_receive[0]=='O'&&GSM_receive[1]=='K')
test_boot=Yes;
else
test_boot=No;
if(GSM_receive[12]=='C')
test_net_register=Yes;
else
test_net_register=No;
if(GSM_receive[0]=='R'&&GSM_receive[1]=='I'&&GSM_receive[2]=='N'&&GSM_receive[3]=='G')
{
test_have_call=Yes;
}
else
{
test_have_call=No;
}
if(GSM_receive[0]=='+'&&GSM_receive[1]=='C'&&GSM_receive[2]=='L'&&GSM_receive[3]=='I'&&GSM_receive[4]=='P')
{
for(i=0;i<11;i++)
{
number[i]=GSM_receive[i+8];
}
//display_number(line_2,0x00);
}
if(GSM_receive[0]=='+'&&GSM_receive[1]=='C'&&GSM_receive[2]=='M'&&GSM_receive[3]=='T'&&GSM_receive[4]=='I')
{
test_have_SM = Yes;
}
GSMDATA_count=0;
}
else
{
GSM_receive[GSMDATA_count]=UART_data;
GSMDATA_count++;
}
}
RI=0;
}

復制代碼