標題: MQTT-relay-sdk-v21程序源碼 [打印本頁]
作者: aedkhz    時間: 2018-10-17 13:38
標題: MQTT-relay-sdk-v21程序源碼
MQTT程序

單片機源程序如下:
  1. #include "stdio.h"
  2. #include "stdlib.h"
  3. #include "stdint.h"
  4. #include "string.h"
  5. #include "system.h"
  6. #include "sys.h"
  7. #include "usart.h"
  8. #include "sim900a.h"
  9. #include "relay.h"
  10. #include "mqtt-user.h"
  11. #include "timer.h"
  12. #include "timer_task.h"
  13. #include "frozen.h"
  14. #include "parameter.h"
  15. #include "ctype.h"
  16. #include "MQTTPacket.h"

  18. /* 需要在這里更改服務器地址端口，用戶名密碼等信息 */
  19. /* 設備默認會將IMEI(SIM800C模塊上的標號)設置為clientID */
  20. /*  */
  21. #define MQTT_SERVER_IP  "relay.mqtt.iot.gz.baidubce.com"
  22. #define MQTT_SERVER_PORT        "1883"

  24. char client_id[128] = {0};
  25. char user_name[128] = {"relay/relay"};
  26. char password[128] = {"Zqu9im83wlVp8++FgyVJb9d+J4EKd4ytXpa9w02N2hE="};
  27. char topic[64] = {"relay"};

  29. int main(void)
  30. {
  31.     SystemInit();
  32.     NVIC_PriorityGroupConfig(NVIC_PriorityGroup_2);
  33.     delay_init();
  34.     usart1_init(921600);
  35.     usart3_init(115200);
  36.     timer3_init(10000, 7199);//10Khz的計數頻率，計數到10000為1s
  37.     sim900a_gpio_init();
  38.     relay_init();
  39.     relay_on();
  40.    
  41.     sim900a_user_config();
  42.     sim900a_get_imei(client_id);   
  43.    
  44.     printf("\n*******MQTT INFO************\n");
  45.     printf("CLIENT ID:%s\n", client_id);
  46.     printf("USER NAME:%s\n", user_name);
  47.     printf("PASSWORD:%s\n", password);
  48.     printf("*******END************\n");

  50.     mqtt_connection_init(MQTT_SERVER_IP, MQTT_SERVER_PORT, client_id, user_name, password);
  51.     mqtt_subscribe(topic, 0);

  53.     while(1) {
  54.         while (!mqtt_state.connected || mqtt_state.error_count > 1) {
  55.             mqtt_connection_init(MQTT_SERVER_IP, MQTT_SERVER_PORT, client_id, user_name, password);
  56.             delay_ms(500);
  57.             sim900a_cmd_with_reply("AT+CIPSTATUS", "OK", NULL, GSM_CMD_WAIT_NORMAL);
  58.             mqtt_subscribe(topic, 0);
  59.             mqtt_send_beat("topic_server", curr_state);
  60.         }
  61.         user_task_loop();
  62.     }
  63. }
復制代碼

所有資料51hei提供下載:
mqtt-relay-sdk-v21.zip (387.68 KB, 下載次數: 32)






歡迎光臨 (http://www.torrancerestoration.com/bbs/) Powered by Discuz! X3.1