標題: Arduino 電位器控制步進電機正反轉 [打印本頁]

---

作者: 探索軟件    時間: 2018-12-7 09:17
標題: Arduino 電位器控制步進電機正反轉
Arduino 電位器控制步進電機正反轉

//電位器控制步進電機正反轉
#include <LiquidCrystal.h>
LiquidCrystal lcd(12, 11, 5, 4, 3, 2);
#include <Stepper.h>
const int stepsPerRevolution = 80;
Stepper myStepper(stepsPerRevolution, 7, 9, 8, 10);
const int aInPin=A0;  //電位器信號
int val;
void setup() {
myStepper.setSpeed(90);
Serial.begin(9600);
lcd.begin(16, 2);
}

void loop() {
val=analogRead(aInPin);
val=map(val,0,1023,0,99);
lcd.setCursor(0, 0);
lcd.print("val=");
lcd.setCursor(5, 0);
lcd.print(val);
//Serial.println(val);
// 如果阻值小于50 反時針轉
if(val<50){
lcd.setCursor(0, 1);
lcd.print("                ");
lcd.setCursor(0, 1);
lcd.print("counterclockwise");
//Serial.println("反時針");
myStepper.step(stepsPerRevolution);
delay(500);
}  else{
// 如果阻值大于50 順時針轉
lcd.setCursor(0, 1);
lcd.print("                ");
lcd.setCursor(0, 1);
lcd.print("clockwise");
//Serial.println("順時針");
myStepper.step(-stepsPerRevolution);
delay(500);
}
}

視頻:

https://pan.baidu.com/s/19WgWEnB7VyFKmbcZSehgkA

---

歡迎光臨 (http://www.torrancerestoration.com/bbs/)

Powered by Discuz! X3.1