標題: 16燈搖搖棒單片機程序與制作資料 [打印本頁]
作者: 773526042    時間: 2019-5-28 22:59
標題: 16燈搖搖棒單片機程序與制作資料

  1. #include <AT89X52.h>
  2. #define uchar unsigned char
  3. #define uint unsigned int    //宏定義
  4. #define KEY P3_7      //定義畫面切換按鍵
  5. uchar KY;    //KY作用在后面說明     
  6. uchar disp;     //顯示漢字指針
  7. uchar pic=0,num=0;     //pic為按鍵次數；num為中斷次數


  10. uchar code love[] = {
  11. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  12. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFE,0x3F,0x00,0x20,0x00,0x20,0x00,0x20,
  13. 0x00,0x20,0x00,0x20,0x00,0x20,0x00,0x20,0x00,0x00,0x00,0x00,0x00,0x00,0xF8,0x0F,
  14. 0x04,0x10,0x02,0x20,0x02,0x20,0x02,0x20,0x02,0x20,0x04,0x10,0xF8,0x0F,0x00,0x00,
  15. 0x00,0x00,0x00,0x00,0xFE,0x07,0x00,0x08,0x00,0x10,0x00,0x20,0x00,0x20,0x00,0x10,
  16. 0x00,0x08,0xFE,0x07,0x00,0x00,0x00,0x00,0x00,0x00,0xFE,0x3F,0x82,0x20,0x82,0x20,
  17. 0x82,0x20,0x82,0x20,0x82,0x20,0x82,0x20,0x82,0x20,0x00,0x00,0x00,0x00,0x00,0x00,
  18. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,/*LOVE*/
  19. };


  22. uchar code loveyou[] = {
  23. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  24. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  25. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  26. 0x78,0x00,0xFC,0x00,0xFE,0x01,0xFE,0x03,0xFE,0x07,0xFE,0x0F,0xFE,0x1F,0xFC,0x3F,
  27. 0xF8,0x7F,0xFC,0x3F,0xFE,0x1F,0xFE,0x0F,0xFE,0x07,0xFE,0x03,0xFE,0x01,0xFC,0x00,
  28. 0x78,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  29. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  30. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,/*心形圖案*/
  31. };

  33. uchar code hehe[] = {
  34. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  35. 0x00,0x00,0x00,0x00,0x00,0x00,0xC0,0x01,0x40,0x01,0xC0,0x01,0x00,0x00,0x00,0x00,
  36. 0xF0,0x0F,0x08,0x10,0x04,0x20,0x00,0x00,0x00,0x00,0xF0,0x3F,0x08,0x00,0x04,0x00,
  37. 0x04,0x00,0x04,0x00,0x08,0x00,0xF0,0x3F,0x00,0x00,0x00,0x00,0x00,0x20,0x00,0x20,
  38. 0x00,0x20,0x00,0x20,0x00,0x20,0x00,0x00,0x00,0x00,0xF0,0x3F,0x08,0x00,0x04,0x00,
  39. 0x04,0x00,0x04,0x00,0x08,0x00,0xF0,0x3F,0x00,0x00,0x00,0x00,0x04,0x20,0x08,0x10,
  40. 0xF0,0x0F,0x00,0x00,0x00,0x00,0xC0,0x01,0x40,0x01,0xC0,0x01,0x00,0x00,0x00,0x00,
  41. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,/*呵呵o(∩_∩)o圖案*/
  42. };

  44. unsigned char code hanzi[] = {
  45. //-- 歡 --
  46.       0x04,0x10,0x34,0x08,0xC4,0x06,0x04,0x01,
  47.       0xC4,0x82,0x3C,0x8C,0x20,0x40,0x10,0x30,
  48.       0x0F,0x0C,0xE8,0x03,0x08,0x0C,0x08,0x10,
  49.       0x28,0x60,0x18,0xC0,0x00,0x40,0x00,0x00,
  50. //-- 迎 --
  51.       0x40,0x00,0x42,0x40,0x44,0x20,0xC8,0x1F,
  52.       0x00,0x20,0xFC,0x47,0x04,0x42,0x02,0x41,
  53.       0x82,0x40,0xFC,0x7F,0x04,0x40,0x04,0x42,
  54.       0x04,0x44,0xFE,0x63,0x04,0x20,0x00,0x00,
  55. //-- 使 --
  56.       0x40,0x00,0x20,0x00,0xF8,0xFF,0x07,0x00,
  57.       0x04,0x80,0xF4,0x43,0x14,0x45,0x14,0x29,
  58.       0x14,0x19,0xFF,0x17,0x14,0x21,0x14,0x21,
  59.       0x14,0x41,0xF6,0xC3,0x04,0x40,0x00,0x00,
  60. //-- 用 --
  61.       0x00,0x80,0x00,0x60,0xFE,0x1F,0x22,0x02,
  62.       0x22,0x02,0x22,0x02,0x22,0x02,0xFE,0x7F,
  63.       0x22,0x02,0x22,0x02,0x22,0x42,0x22,0x82,
  64.       0xFF,0x7F,0x02,0x00,0x00,0x00,0x00,0x00,


  67. };

  69. /*****函數聲明*****/
  70. void display1_ltor(void);
  71. void display2_ltor(void);
  72. void display2_rtol(void);
  73. void display3(void);
  74. void display4(void);






  81. /*****n（us）延時子程序*****/
  82. void DelayUs(uint N)
  83. {
  84. uint x;
  85. for(x=0; x<=N;x++);
  86. }

  88. /*****中斷服務程序*****/
  89. void intersvr0(void) interrupt 0
  90. {
  91. ;
  92. KY=~KY;      //每個搖動來回水銀開關會在擺幅兩端分別產生下降沿中斷，只提取其中一次（從左向右搖才顯示）
  93. if(KY==0)
  94. {
  95.    num++;     //計算中斷次數
  96.    switch(pic)      //選擇畫面
  97.    {
  98.         case 0:{display1_ltor();}break;
  99.     case 1:{display2_ltor();}break;
  100.     case 2:{display3();}break;
  101.     case 3:{display4();}break;
  102.     default:{display1_ltor();}  
  103.    }
  104. }

  106. }
  107. /*****顯示子程序1（漢字）*****/
  108. void display1_ltor(void)
  109. {
  110. uchar i;
  111. if(num>10){disp++;num=0;}     //12個漢字分為3次顯示完（每次顯示4個），每中斷10次切換
  112. if(disp>2)disp=0;
  113.   DelayUs(5200);     //此處延時時間依各硬件差別而各不相同，試著調整使得顯示內容居中即可
  114. for(i=0;i<64;i++)
  115. {
  116.      P0=~hanzi[disp*128+i*2];
  117.      P2=~hanzi[disp*128+i*2+1];
  118.      DelayUs(100);
  119. }
  120. }

  122. /*****顯示子程序2（LOVE）*****/
  123. void display2_ltor(void)
  124. {
  125. uchar i;
  126. DelayUs(4000);
  127. for(i=0;i<64;i++)
  128. {
  129.      P0=~love[i*2];
  130.      P2=~love[i*2+1];
  131.      DelayUs(140);
  132. }
  133. }
  134. /*****顯示子程序3（心形圖案）*****/
  135. void display3(void)
  136. {
  137. uchar i;
  138.   DelayUs(4000);
  139. for(i=0;i<64;i++)
  140. {
  141.      P0=~loveyou[i*2];
  142.      P2=~loveyou[i*2+1];
  143.      DelayUs(120);
  144. }
  145. }

  147. /*****顯示子程序4（呵呵o(∩_∩)o圖案）*****/
  148. void display4(void)
  149. {
  150. uchar i;
  151. DelayUs(4000);
  152. for(i=0;i<64;i++)
  153. {
  154.      P0=~hehe[i*2];
  155.      P2=~hehe[i*2+1];
  156.      DelayUs(120);
  157. }
  158. }

  160. /*****主函數*****/
  161. void main(void)
  162. {
  163. IT0=1;
  164. EX0=1;
  165. EA=1;      //開中斷，下降沿中斷
  166. KY=0;
  167. KEY=1;
  168. while(1)     //主程序中只檢測按鍵
  169. {
  170.   if(KEY==0)     //畫面切換鍵按下
  171.   {
  172.      DelayUs(10000);     //按鍵去抖
  173.      if(KEY==0);
  174.      pic++;
  175.      while(KEY==0);
  176.   }
  177.   if(pic>3)pic=0;
  178. }
  179. }
  180. /*****END*****/
復制代碼
全部資料51hei下載地址：
搖搖棒配套資料.zip (2.04 MB, 下載次數: 85)
作者: 丟丟的貓    時間: 2019-7-26 11:28
元件清單在哪��？
作者: linnyshow    時間: 2019-8-8 09:39
很好。。。。
作者: dugunanahai    時間: 2021-2-2 21:26
我怎么搖不出這個效果，只亮邊上一排
作者: s290257552    時間: 2021-9-13 15:31
看著不錯，有用嗎？
作者: uvwxay    時間: 2022-1-28 19:47
做個試試，這個是有遙的速度要求吧



歡迎光臨 (http://www.torrancerestoration.com/bbs/) Powered by Discuz! X3.1