標題: Arduino控制LCD12864 [打印本頁]
作者: a157128081    時間: 2020-4-4 07:54
標題: Arduino控制LCD12864
Arduino控制LCD12864 有興趣的看看



  1. /*
  2. LCD  Arduino
  3. PIN1 = GND
  4. PIN2 = 5V
  5. RS(CS) = 8;
  6. RW(SID)= 9;
  7. EN(CLK) = 3;
  8. PIN15 PSB = GND;
  9. 行：漢字：8個 字母16個
  10. 列：4列
  11. */

  13. #include <LCD12864RSPI.h>
  14. #define AR_SIZE( a ) sizeof( a ) / sizeof( a[0] )

  16. unsigned char show1[]={0x41,0x42,0x43,0x44,0x45,0x46,0x47,0x48,0x49,0x4A,0x4B,0x4C,0x4D,0x4E,0x4F,0x50};
  17. unsigned char show2[]={0x61,0x62,0x63,0x64,0x65,0x66,0x67,0x68,0x69,0x6A,0x6B,0x6C,0x6D,0x6E,0x6F,0x70};
  18. unsigned char show3[]={0x51,0x52,0x53,0x54,0x55,0x56,0x57,0x58,0x59,0x5A};
  19. unsigned char show4[]={0x71,0x72,0x73,0x74,0x75,0x76,0x77,0x78,0x79,0x7A};
  20. void setup()
  21. {
  22. LCDA.Initialise(); // 屏幕初始化
  23. delay(100);
  24. }

  26. void loop()
  27. {
  28. LCDA.CLEAR();//清屏
  29. delay(100);
  30. LCDA.DisplayString(0,0,show1,AR_SIZE(show1));
  31. LCDA.DisplayString(1,0,show2,AR_SIZE(show2));
  32. LCDA.DisplayString(2,0,show3,AR_SIZE(show3));
  33. LCDA.DisplayString(3,0,show4,AR_SIZE(show4));
  34. while(1);
  35. //LCDA.CLEAR();//清屏
  36. }
復制代碼

以上資料51hei下載地址：
Arduino_LCD12864.zip (2.76 KB, 下載次數: 114)

作者: gdgzwqz    時間: 2020-6-14 12:09
學習了，謝謝樓主！
作者: baishangbo    時間: 2020-6-19 10:39
感謝分享~
作者: 時空扭曲    時間: 2020-7-8 10:57
接上那種大體積的LCD12864只有背光卻沒顯示  不知道是什么原因   樓主用的是0.96寸的那種液晶屏幕么
作者: katesea    時間: 2020-7-16 16:28
各位，及LZ,    先要說清楚，LCD12864硬件是用的哪種主控，主控不同，操作不同，程序代碼不同
作者: wy820    時間: 2020-7-21 10:25
這種接線方式是SPI嗎？



歡迎光臨 (http://www.torrancerestoration.com/bbs/) Powered by Discuz! X3.1