<track id="p3dg2"></track>

QQ截圖20130626035710.jpg (70.1 KB, 下載次數: 406)

下載附件

2013-6-26 04:30 上傳

16x16點陣滾動51hei.com.rar (50.79 KB, 下載次數: 1382)

2013-6-26 04:31 上傳

點擊文件名下載附件
下載積分: 黑幣 -5

#include <reg51.h>
#include <intrins.h>
#define  DATAOUT P2    //P2 use as data,  you can change
#define  SPEED  13

void ymove(char dir,unsigned char *ptr,char speed);
void xmove(char dir,unsigned char *ptr,char n,char speed);
void delay(unsigned int a);
void display();
void displaytime(char time);
void init164();

sbit  ADATA= DATAOUT^0;
sbit  ASCK=  DATAOUT^1;
sbit  LATCH= DATAOUT^2;
sbit  BDATA= DATAOUT^3;
sbit  BCLK=  DATAOUT^4;

code unsigned char xin[32]={
	0x00,0x00,0x00,0x00,0x00,0x00,0x0E,0x38,   //心
      0x1F,0x7C,0x3F,0xFE,0x3F,0xFE,0x3F,0xFE,
      0x1F,0xFC,0x0F,0xF8,0x07,0xF0,0x03,0xE0,
      0x01,0xC0,0x00,0x80,0x00,0x00,0x00,0x00};

code unsigned char zhong[32]={  
	0x01,0x00,0x01,0x00,0x01,0x04,0x7F,0xFE,  //中
      0x41,0x04,0x41,0x04,0x41,0x04,0x41,0x04,
      0x7F,0xFC,0x41,0x04,0x01,0x00,0x01,0x00,
      0x01,0x00,0x01,0x00,0x01,0x00,0x01,0x00};
	
code unsigned char guo[32]={
	0x00,0x04,0x7F,0xFE,0x40,0x24,0x5F,0xF4,  //國
      0x41,0x04,0x41,0x04,0x41,0x44,0x4F,0xE4,
      0x41,0x04,0x41,0x44,0x41,0x24,0x41,0x04,
      0x5F,0xF4,0x40,0x04,0x7F,0xFC,0x40,0x04};

code unsigned char dui[32]={           
	0x7C,0x40,0x44,0x40,0x48,0x40,0x48,0x40,  //隊
      0x50,0x40,0x48,0x40,0x48,0x40,0x44,0xA0,
      0x44,0xA0,0x44,0xA0,0x69,0x10,0x51,0x10,
      0x42,0x08,0x44,0x06,0x48,0x04,0x00,0x00};
 
code unsigned char jia[32]={ 					
	0x10,0x00,0x10,0x00,0x10,0x04,0x12,0x7E,  //加
      0xFF,0x44,0x12,0x44,0x12,0x44,0x12,0x44,
      0x12,0x44,0x22,0x44,0x22,0x44,0x22,0x44,
      0x22,0x44,0x4A,0x7C,0x84,0x44,0x00,0x00};

code unsigned char you[32]={
	0x00,0x40,0x40,0x40,0x30,0x40,0x10,0x44,  //油
      0x87,0xFE,0x64,0x44,0x24,0x44,0x0C,0x44,
      0x14,0x44,0x27,0xFC,0xE4,0x44,0x24,0x44,
      0x24,0x44,0x24,0x44,0x27,0xFC,0x24,0x04 };

code unsigned char gth[32]={
	0x00,0x00,0x01,0x80,0x03,0xC0,0x03,0xC0,    //!
      0x03,0xC0,0x03,0xC0,0x03,0xC0,0x01,0x80,
      0x01,0x80,0x01,0x80,0x00,0x00,0x01,0x80,
      0x03,0xC0,0x01,0x80,0x00,0x00,0x00,0x00};

unsigned char idata buffer[32];

void main(void)
{
	unsigned char i;
	init164();
	while(1)
	{	
		for(i=0;i<32;i++)
			buffer[ i]=xin[ i];

		displaytime(1);
		
		xmove(1,zhong,3,SPEED);
		displaytime(1);

		ymove(1,0,SPEED);
		ymove(1,jia,SPEED);
		ymove(1,you,SPEED);
		ymove(1,0,SPEED);
		xmove(0,jia,3,SPEED);
		ymove(0,gth,SPEED);
		ymove(0,0,SPEED);
		xmove(1,xin,1,SPEED);

	}
}
/*************  子函數   ******************/
void delay(unsigned int a)
{
	while(a--);
}

void display()
{
	unsigned char hang,ib,k,tmp;

    DATAOUT= 0x0;
	BDATA = 0;
	for(hang=0;hang<16;hang++)
	{
		ASCK =0;		
		LATCH=0;
		BCLK =0;
		for(ib=0;ib<2;ib++)
		{
			tmp = buffer[hang*2+ib];
			for(k=0;k<8;k++)
			{
				tmp <<=1;
				ASCK  =0;
				ADATA =CY;
				ASCK  =1;
			}
		}
		DATAOUT|=0x14;
		//LATCH=1;
		//BCLK=1;
		BDATA=1;
	}
	delay(64);
	ASCK =0;
	ASCK =1;
}

void displaytime(char time)
{
	unsigned char i;
	while(time--)
	{
		i=130;
		while(i--)
	 		display();
	}
}

void init164()
{
	char i;
	BDATA=1;
	for(i=0;i<16;i++)
	{
		BCLK =0;
		BCLK =1;
	}
}

void xmove(char dir,unsigned char *ptr,char n,char speed)																	
{      /*       方向                    n是要移動的漢字個數        移動速度*/         
	unsigned char  i=0,  ib=0;
	unsigned int   tmp=0, speedm=0;
	unsigned char  buffer2[16];         //半個漢字的緩存

	n*=2;     //左半字和右半字，所以要x2	     
	for(i=0;i<16;i++)   //清零
		buffer2[ i]=0;

	if(dir == 1)     
	{
 /****     向左移動    ****/
		for(n;n>0;n--)   
		{		
			if(ptr != 0)
			{
				tmp = n%2;	//判斷是左半字還是右半字
				for(i=0;i<16;i++)
					buffer2[ i]=ptr[i*2+tmp];
	
				if(tmp)		//tmp為1時，將地址指向下一個漢字
					ptr+=32;
			}
			 
			for(tmp=8;tmp>0;tmp--)  //要移動8列	
			{	                           
				ib=0;	
				for(i=0;i<16;i++)
				{                //要移16行，共16個字節
	               
					buffer[ib] <<=1; //移第一個半字
					if(buffer[ib+1] & 0x80)	
						buffer[ib]++;
					ib++;			
	
					buffer[ib]<<=1;	        //移后半字
					if(buffer2[ i] & 0x80)	   
						buffer[ib]++;
					ib++;
	
					buffer2[ i]<<=1;		//緩沖左半字向左移一位
				}
				
				speedm=speed;	//更新點陣
				while(speedm--)
					display();
			}
		}
	}
//--------------------------------------------------//
	else        
	{
   /******  向右移動   ******/
		for(n;n>0;n--)
		{		
			if(ptr != 0)
			{
				tmp = (n+1) % 2  ;	//判斷左半字還是右半字
				for(i=0;i<16;i++)
					buffer2[ i]=ptr[i*2+tmp];
								
				if(tmp == 0)		//tmp為0時，將地址指向下一個漢字
					ptr+=32;
			}
			 
			for(tmp=8;tmp>0;tmp--)  //要移動8列	
			{	                           
				ib=0;	
				for(i=0;i<16;i++)
				{                //要移16行，共16個字節
	               
					buffer[ib+1] >>= 1;	     //移右半字
					if(buffer[ib] & 0x01)	
						buffer[ib+1] |=0x80 ;			
	
					buffer[ib] >>= 1;	    //移左半字
					if(buffer2[ i] & 0x01)	   
						buffer[ib] |= 0x80;
					ib+=2;
	
					buffer2[ i] >>=1;		//下個漢字的右半字向右移一位
				}
				
				speedm=speed;	
				while(speedm--)  //更新點陣
					display();
			}
		
		}
	}

}
void ymove(char dir,unsigned char *ptr, char speed)
{                   //dir=1上移動，dir=0為下移動
	char i=0, j=0, ib=0;
	unsigned int  tmp=0, speedm=0;

	if(dir==0)      
	{	
   /****  向下移  ****/
		ib=31;		
		for(i=16;i>0;i--)   //下移16行
		{		
			for(j=29;j>-1;j--)
				buffer[j+2]=buffer[j];	//將上一行的內容復制到下一行
	
			if(ptr==0)
			{				//移空時，buffer的首行用0移入
				buffer[0]=0;
				buffer[1]=0;
			}
			else
			{				//否則，處理buffer的首行元素		
			    buffer[1]=ptr[ib];
				buffer[0]=ptr[ib-1];
				ib=ib-2;
			}
			speedm=speed;	
			while(speedm--)	  //更新點陣
				display();
		}
	}

/****** 向上移 *******/
	else
	{			
		ib=0;	  //數組元素序號
		for(i=0;i<16;i++)    //上移16行
		{	
			for(j=0;j<30;j++)	   //將下一行的內容復制到上一行
				buffer[j]=buffer[j+2];

			if(ptr==0)        //移入為空，buffer的末行用0移入
			{			
				buffer[30]=0;
				buffer[31]=0;
			}
			else
			{			//否則，處理buffer的末行元素
				buffer[30]=ptr[ib];
				buffer[31]=ptr[ib+1];
				ib=ib+2;			   
			}
			speedm=speed;	//更新點陣
			while(speedm--)
				display();
	   	}
   	}
			
}