標題: 單片機點亮無字庫LCD12864完整程序，親測無誤 [打印本頁]
作者: 電子愛好者我    時間: 2020-9-24 09:27
標題: 單片機點亮無字庫LCD12864完整程序，親測無誤
打板實測效果如下
單片機源程序如下:
  1. #include"stc12c5axx.h"
  2. #include "intrins.h"
  3. #define uchar unsigned char
  4. #define uint unsigned int

  6. sbit e=P4^3;
  7. sbit rw=P0^3;
  8. sbit rs=P0^4;
  9. sbit cs1=P0^7;
  10. sbit cs2=P0^6;

  12. ///***********大漢字?jǐn)?shù)組,取模方式32X32*****************/
  13. //uchar code tab[][128]={
  14. //
  15. ///*--  調入了一幅圖像：這是您新建的圖像  --*/
  16. ///*--  寬度x高度=16x16  --*/
  17. //0x02,0x00,0x01,0x00,0x21,0x00,0x63,0x02,0x06,0x00,0x05,0x04,0xB5,0x00,0x01,0x0A,
  18. //0x13,0x08,0x81,0x09,0xA3,0x0A,0x91,0x09,0xAB,0x0A,0x41,0x08,0x11,0x00,0x00,0x09
  19. //
  20. //
  21. //};
  22. /***********標準漢字?jǐn)?shù)組，取模方式16X16*****************/
  23. uchar code tab_biao[][32]={

  25. /*--  文字:  代  --*/
  26. /*--  宋體12;  此字體下對應的點陣為：寬x高=16x16   --*/
  27. 0x00,0x80,0x60,0xF8,0x07,0x20,0x20,0x20,0x7F,0xA0,0x10,0x11,0x16,0x10,0x10,0x00,
  28. 0x01,0x00,0x00,0xFF,0x00,0x00,0x00,0x00,0x00,0x03,0x0C,0x10,0x20,0x40,0xF8,0x00,

  30. /*--  文字:  碼  --*/
  31. /*--  宋體12;  此字體下對應的點陣為：寬x高=16x16   --*/
  32. 0x04,0x84,0xE4,0x5C,0x44,0xC4,0x00,0x02,0xF2,0x82,0x82,0x82,0xFE,0x80,0x80,0x00,
  33. 0x02,0x01,0x7F,0x10,0x10,0x3F,0x00,0x08,0x08,0x08,0x08,0x48,0x88,0x40,0x3F,0x00,

  35. /*--  文字:  書  --*/
  36. /*--  宋體12;  此字體下對應的點陣為：寬x高=16x16   --*/
  37. 0x00,0x00,0x08,0x08,0x08,0x08,0xFF,0x08,0x08,0x08,0xF9,0x02,0x04,0x00,0x00,0x00,
  38. 0x01,0x01,0x01,0x01,0x01,0x01,0xFF,0x01,0x01,0x01,0x21,0x41,0x21,0x1F,0x00,0x00,

  40. /*--  文字:  寫  --*/
  41. /*--  宋體12;  此字體下對應的點陣為：寬x高=16x16   --*/
  42. 0x08,0x06,0x82,0x7A,0x22,0x22,0x22,0x22,0x22,0x22,0x22,0x22,0x22,0x0A,0x06,0x00,
  43. 0x08,0x08,0x09,0x09,0x09,0x09,0x09,0x09,0x09,0x49,0x81,0x41,0x3F,0x00,0x00,0x00,

  45. /*--  文字:  人  --*/
  46. /*--  宋體12;  此字體下對應的點陣為：寬x高=16x16   --*/
  47. 0x00,0x00,0x00,0x00,0x00,0x00,0xC0,0x3F,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  48. 0x80,0x40,0x20,0x10,0x0C,0x03,0x00,0x00,0x00,0x03,0x0C,0x10,0x20,0x40,0x80,0x00,

  50. /*--  文字:  生  --*/
  51. /*--  宋體12;  此字體下對應的點陣為：寬x高=16x16   --*/
  52. 0x80,0x40,0x30,0x1E,0x10,0x10,0x10,0xFF,0x10,0x10,0x10,0x10,0x10,0x10,0x00,0x00,
  53. 0x40,0x40,0x42,0x42,0x42,0x42,0x42,0x7F,0x42,0x42,0x42,0x42,0x42,0x40,0x40,0x00,

  55. /*--  文字:  技  --*/
  56. /*--  宋體12;  此字體下對應的點陣為：寬x高=16x16   --*/
  57. 0x10,0x10,0x10,0xFF,0x10,0x90,0x08,0x88,0x88,0x88,0xFF,0x88,0x88,0x88,0x08,0x00,
  58. 0x04,0x44,0x82,0x7F,0x01,0x80,0x80,0x40,0x43,0x2C,0x10,0x28,0x46,0x81,0x80,0x00,

  60. /*--  文字:  術  --*/
  61. /*--  宋體12;  此字體下對應的點陣為：寬x高=16x16   --*/
  62. 0x00,0x10,0x10,0x10,0x10,0xD0,0x30,0xFF,0x30,0xD0,0x12,0x1C,0x10,0x10,0x00,0x00,
  63. 0x10,0x08,0x04,0x02,0x01,0x00,0x00,0xFF,0x00,0x00,0x01,0x02,0x04,0x08,0x10,0x00,

  65. /*--  文字:  成  --*/
  66. /*--  宋體12;  此字體下對應的點陣為：寬x高=16x16   --*/
  67. 0x00,0x00,0xF8,0x88,0x88,0x88,0x88,0x08,0x08,0xFF,0x08,0x09,0x0A,0xC8,0x08,0x00,
  68. 0x80,0x60,0x1F,0x00,0x10,0x20,0x1F,0x80,0x40,0x21,0x16,0x18,0x26,0x41,0xF8,0x00,

  70. /*--  文字:  就  --*/
  71. /*--  宋體12;  此字體下對應的點陣為：寬x高=16x16   --*/
  72. 0x04,0xE4,0x25,0x26,0x24,0xE4,0x04,0x20,0x20,0xFF,0x20,0xE2,0x2C,0x20,0x20,0x00,
  73. 0x10,0x4B,0x82,0x7E,0x02,0x0B,0x90,0x60,0x1C,0x03,0x00,0x3F,0x40,0x40,0x70,0x00,

  75. /*--  文字:  夢  --*/
  76. /*--  宋體12;  此字體下對應的點陣為：寬x高=16x16   --*/
  77. 0x40,0x44,0x24,0x14,0x7F,0x94,0x24,0x00,0x24,0x14,0x7F,0x14,0x24,0x44,0x40,0x00,
  78. 0x00,0x80,0x88,0x84,0x42,0x45,0x29,0x11,0x11,0x09,0x05,0x03,0x00,0x00,0x00,0x00,

  80. /*--  文字:  想  --*/
  81. /*--  宋體12;  此字體下對應的點陣為：寬x高=16x16   --*/
  82. 0x00,0x08,0x88,0x68,0xFF,0x48,0x88,0x00,0xFE,0x52,0x52,0x52,0xFE,0x00,0x00,0x00,
  83. 0x40,0x31,0x00,0x00,0x3B,0x40,0x40,0x44,0x5B,0x42,0x42,0x72,0x03,0x08,0x30,0x00,

  85. /*--  文字:  技  --*/
  86. /*--  宋體12;  此字體下對應的點陣為：寬x高=16x16   --*/
  87. 0x10,0x10,0x10,0xFF,0x10,0x90,0x08,0x88,0x88,0x88,0xFF,0x88,0x88,0x88,0x08,0x00,
  88. 0x04,0x44,0x82,0x7F,0x01,0x80,0x80,0x40,0x43,0x2C,0x10,0x28,0x46,0x81,0x80,0x00,

  90. /*--  文字:  術  --*/
  91. /*--  宋體12;  此字體下對應的點陣為：寬x高=16x16   --*/
  92. 0x00,0x10,0x10,0x10,0x10,0xD0,0x30,0xFF,0x30,0xD0,0x12,0x1C,0x10,0x10,0x00,0x00,
  93. 0x10,0x08,0x04,0x02,0x01,0x00,0x00,0xFF,0x00,0x00,0x01,0x02,0x04,0x08,0x10,0x00,

  95. /*--  文字:  照  --*/
  96. /*--  宋體12;  此字體下對應的點陣為：寬x高=16x16   --*/
  97. 0x00,0xFE,0x42,0x42,0x42,0xFE,0x00,0x42,0xA2,0x9E,0x82,0xA2,0xC2,0xBE,0x00,0x00,
  98. 0x80,0x6F,0x08,0x08,0x28,0xCF,0x00,0x00,0x2F,0xC8,0x08,0x08,0x28,0xCF,0x00,0x00,

  100. /*--  文字:  亮  --*/
  101. /*--  宋體12;  此字體下對應的點陣為：寬x高=16x16   --*/
  102. 0x00,0x04,0x04,0x74,0x54,0x54,0x55,0x56,0x54,0x54,0x54,0x74,0x04,0x04,0x00,0x00,
  103. 0x84,0x83,0x41,0x21,0x1D,0x05,0x05,0x05,0x05,0x05,0x7D,0x81,0x81,0x85,0xE3,0x00,

  105. /*--  文字:  前  --*/
  106. /*--  宋體12;  此字體下對應的點陣為：寬x高=16x16   --*/
  107. 0x08,0x08,0xE8,0x29,0x2E,0x28,0xE8,0x08,0x08,0xC8,0x0C,0x0B,0xE8,0x08,0x08,0x00,
  108. 0x00,0x00,0xFF,0x09,0x49,0x89,0x7F,0x00,0x00,0x0F,0x40,0x80,0x7F,0x00,0x00,0x00,

  110. /*--  文字:  程  --*/
  111. /*--  宋體12;  此字體下對應的點陣為：寬x高=16x16   --*/
  112. 0x24,0x24,0xA4,0xFE,0x23,0x22,0x00,0x3E,0x22,0x22,0x22,0x22,0x22,0x3E,0x00,0x00,
  113. 0x08,0x06,0x01,0xFF,0x01,0x06,0x40,0x49,0x49,0x49,0x7F,0x49,0x49,0x49,0x41,0x00,

  115. /*--  文字:  學  --*/
  116. /*--  宋體12;  此字體下對應的點陣為：寬x高=16x16   --*/
  117. 0x40,0x30,0x11,0x96,0x90,0x90,0x91,0x96,0x90,0x90,0x98,0x14,0x13,0x50,0x30,0x00,
  118. 0x04,0x04,0x04,0x04,0x04,0x44,0x84,0x7E,0x06,0x05,0x04,0x04,0x04,0x04,0x04,0x00,

  120. /*--  文字:  習  --*/
  121. /*--  宋體12;  此字體下對應的點陣為：寬x高=16x16   --*/
  122. 0x00,0x02,0x02,0x02,0x12,0x22,0xC2,0x02,0x02,0x02,0x02,0x02,0xFE,0x00,0x00,0x00,
  123. 0x00,0x08,0x18,0x08,0x04,0x04,0x04,0x02,0x02,0x41,0x81,0x40,0x3F,0x00,0x00,0x00,

  125. /*--  文字:  成  --*/
  126. /*--  宋體12;  此字體下對應的點陣為：寬x高=16x16   --*/
  127. 0x00,0x00,0xF8,0x88,0x88,0x88,0x88,0x08,0x08,0xFF,0x08,0x09,0x0A,0xC8,0x08,0x00,
  128. 0x80,0x60,0x1F,0x00,0x10,0x20,0x1F,0x80,0x40,0x21,0x16,0x18,0x26,0x41,0xF8,0x00,

  130. /*--  文字:  就  --*/
  131. /*--  宋體12;  此字體下對應的點陣為：寬x高=16x16   --*/
  132. 0x04,0xE4,0x25,0x26,0x24,0xE4,0x04,0x20,0x20,0xFF,0x20,0xE2,0x2C,0x20,0x20,0x00,
  133. 0x10,0x4B,0x82,0x7E,0x02,0x0B,0x90,0x60,0x1C,0x03,0x00,0x3F,0x40,0x40,0x70,0x00,

  135. /*--  文字:  未  --*/
  136. /*--  宋體12;  此字體下對應的點陣為：寬x高=16x16   --*/
  137. 0x80,0x80,0x88,0x88,0x88,0x88,0x88,0xFF,0x88,0x88,0x88,0x88,0x88,0x80,0x80,0x00,
  138. 0x20,0x20,0x10,0x08,0x04,0x02,0x01,0xFF,0x01,0x02,0x04,0x08,0x10,0x20,0x20,0x00,

  140. /*--  文字:  來  --*/
  141. /*--  宋體12;  此字體下對應的點陣為：寬x高=16x16   --*/
  142. 0x00,0x08,0x08,0x28,0xC8,0x08,0x08,0xFF,0x08,0x08,0x88,0x68,0x08,0x08,0x00,0x00,
  143. 0x21,0x21,0x11,0x11,0x09,0x05,0x03,0xFF,0x03,0x05,0x09,0x11,0x11,0x21,0x21,0x00,


  146. };
  147. void Delay50us()                //@11.0592MHz
  148. {
  149.         unsigned char i, j;

  151.         _nop_();
  152.         _nop_();
  153.         _nop_();
  154.         i = 1;
  155.         j = 133;
  156.         do
  157.         {
  158.                 while (--j);
  159.         } while (--i);
  160. }


  163.   void lcd12864_write_com(uchar com) //寫指令
  164.   {
  165.           rs=0;
  166.           rw=0;
  167.           e=0;
  168.           Delay50us();
  169.           P1=com;
  170.           Delay50us();
  171.           e=1;
  172.           Delay50us();
  173.           e=0;
  174.   }

  176.   void lcd12864_write_date(uchar date)//寫數據
  177.   {
  178.           rs=1;
  179.           rw=0;
  180.           e=0;
  181.           Delay50us();
  182.           P1=date;
  183.           Delay50us();
  184.           e=1;
  185.           Delay50us();
  186.           e=0;
  187.   }
  188. void lcd12864_init()        //初始化
  189. {
  190.         lcd12864_write_com(0x3f);//打開屏幕        ，關閉是3e
  191.         Delay50us();
  192.         lcd12864_write_com(0xc0); //行的初始化地址
  193.         Delay50us();
  194.         lcd12864_write_com(0xb8);//頁的初始化地址
  195.         Delay50us();
  196.         lcd12864_write_com(0x40);//列的初始化地址
  197.         Delay50us();                                                                                      
  198.           
  199. }
  200.   void clear_lcd12864()        //清屏
  201.   {
  202.            uchar i,j;
  203.            cs1=1;cs2=1;         //打開左右兩屏，實物  注意：LCD12864實物是CS1=1;CS2=1為打開，
  204.            for(i=0;i<8;i++)          //共8頁
  205.            {
  206.                            lcd12864_write_com(0xb8+i);//頁的初始化地址
  207.                         lcd12864_write_com(0x40);//列的初始化地址
  208.            for(j=0;j<64;j++)  //共64列
  209.            {
  210.                            lcd12864_write_date(0x00);
  211.        }
  212.               }
  213.   }


  216. //12864顯示程序：


  219.   /***********大漢字顯示函數************************/
  220. //void hanzi(uchar ye,uchar lie,uchar *shuzhu)        //定義任意頁、任意列、任意數組(*表示指針類型)
  221. //{
  222. //  uchar i,j;
  223. //  for(i=0;i<4;i++)        //4頁
  224. //  {
  225. //  lcd12864_write_com(0xb8+ye+i);//頁的初始化地址
  226. //   lcd12864_write_com(0x40+lie);//列的初始化地址
  227. //   for(j=0;j<32;j++)        //這里要顯示大漢字，取模為32X32  
  228. //   {
  229. //   lcd12864_write_date(shuzhu[i*32+j]);
  230. //   }
  231. //  }
  232. //}
  233.         /***********標準漢字顯示函數************************/
  234. void hanzi2(uchar ye,uchar lie,uchar *shuzhu)        //定義任意頁、任意列、任意數組(*表示指針類型)
  235. {
  236.   uchar i,j;
  237.   for(i=0;i<2;i++)        //2頁
  238.   {
  239.            lcd12864_write_com(0xb8+ye+i);//頁的初始化地址
  240.            lcd12864_write_com(0x40+lie);//列的初始化地址
  241.    for(j=0;j<16;j++)        //這里要顯示標準漢字，取模為16X16  
  242.    {
  243.               lcd12864_write_date(shuzhu[i*16+j]);
  244.    }
  245.   }
  246. }
  247. ///***********小數字顯示函數************************/
  248. //  void shuzi2(uchar ye,uchar lie,uchar *shuzhu)        //定義任意頁、任意列、任意數組(*表示指針類型)
  249. //{
  250. //  uchar i,j;
  251. //  for(i=0;i<2;i++)        //2頁
  252. //  {
  253. //           lcd12864_write_com(0xb8+ye+i);//頁的初始化地址
  254. //           lcd12864_write_com(0x40+lie);//列的初始化地址
  255. //   for(j=0;j<8;j++)        //數字取半模，這里要改為8
  256. //   {
  257. //                   lcd12864_write_date(shuzhu[i*8+j]);
  258. //   }
  259. //  }
  260. //}
  261. void lcd12864_dis() //漢字顯示函數
  262. {
  263. /*******顯示第一行***********/

  265. //        cs1=0;cs2=1;//打開左半屏 ，實物
  266. //       
  267. //        shuzi2(0,0,tab_banlie[10]);// Q
  268. //        shuzi2(0,8,tab_banlie[10]);// Q
  269. //        hanzi2(0,16,tab_biao[4]); //":"
  270. //        shuzi2(0,32,tab_banlie[1]);// 1
  271. //        shuzi2(0,40,tab_banlie[2]);// 2
  272. //        shuzi2(0,48,tab_banlie[3]);// 3
  273. //        shuzi2(0,56,tab_banlie[4]);// 4
  274. //       
  275. //        cs1=0;cs2=1;//打開右半屏 ,實物
  276. //       
  277. //        shuzi2(0,0,tab_banlie[5]);// 5
  278. //        shuzi2(0,8,tab_banlie[6]);// 6
  279. //        shuzi2(0,16,tab_banlie[7]);// 7
  280. //        shuzi2(0,24,tab_banlie[8]);// 8
  281. //        shuzi2(0,32,tab_banlie[9]);// 9
  282.        
  283. /*******顯示第一行（標準漢字）***********/
  284.        
  285.         cs1=1;cs2=0;//打開左半屏 ，實物
  286.        
  287.         hanzi2(0,0,tab_biao[0]); //代
  288.         hanzi2(0,16,tab_biao[1]); //碼
  289.         hanzi2(0,32,tab_biao[2]); //書
  290.         hanzi2(0,48,tab_biao[3]); //寫
  291.        
  292.         cs1=0;cs2=1;//打開右半屏 ,實物
  293.         hanzi2(0,0,tab_biao[4]); //人
  294.         hanzi2(0,16,tab_biao[5]); //生
  295. //       

  297. /*******顯示第二行（標準漢字）***********/

  299.         cs1=1;cs2=0;//打開左半屏 ，實物
  300.        
  301.         hanzi2(2,0,tab_biao[6]); //好
  302.         hanzi2(2,16,tab_biao[7]); //好
  303.         hanzi2(2,32,tab_biao[8]);        //學
  304.         hanzi2(2,48,tab_biao[9]); //習
  305. //       
  306.         cs1=0;cs2=1;//打開右半屏 ,實物
  307.         hanzi2(2,0,tab_biao[10]); //好
  308.         hanzi2(2,16,tab_biao[11]); //好
  309. //        hanzi2(4,32,tab_biao[14]);        //學
  310. //        hanzi2(4,48,tab_biao[15]); //習
  311. /*******顯示第三行（標準漢字）***********/

  313.         cs1=1;cs2=0;//打開左半屏 ，實物
  314.        
  315.         hanzi2(4,0,tab_biao[12]); //好
  316.         hanzi2(4,16,tab_biao[13]); //好
  317.         hanzi2(4,32,tab_biao[14]);        //學
  318.         hanzi2(4,48,tab_biao[15]); //習
  319.        
  320.         cs1=0;cs2=1;//打開右半屏 ,實物
  321.         hanzi2(4,0,tab_biao[16]); //好
  322.         hanzi2(4,16,tab_biao[17]); //好
  323. //        hanzi2(8,32,tab_biao[6]);        //學
  324. //        hanzi2(8,48,tab_biao[7]); //習
  325. ///*******顯示第四行（標準漢字）***********/
  326. //
  327.         cs1=1;cs2=0;//打開左半屏 ，實物
  328.        
  329.         hanzi2(6,0,tab_biao[18]); //好
  330.         hanzi2(6,16,tab_biao[19]); //好
  331.         hanzi2(6,32,tab_biao[20]);        //學
  332.         hanzi2(6,48,tab_biao[21]); //習
  333.        
  334.         cs1=0;cs2=1;//打開右半屏 ,實物
  335.         hanzi2(6,0,tab_biao[22]); //好
  336.         hanzi2(6,16,tab_biao[23]); //好
  337. //        hanzi2(2,32,tab_biao[6]);        //學
  338. //        hanzi2(2,48,tab_biao[7]); //習       
  339. //       
  340.        
  341.         /*******顯示第三行（大漢字）***********/
  342.        
  343. //        cs1=1;cs2=0;//打開左半屏 ，實物
  344. //        hanzi(4,0,tab[4]); //天
  345. //        hanzi(4,32,tab[5]); //天
  346. //       
  347. //        cs1=0;cs2=1;//打開右半屏 ,實物
  348. //        hanzi(4,0,tab[6]); //向
  349. //        hanzi(4,32,tab[7]); //上

  351. }
  352. void main()
  353. {
  354.         lcd12864_init();
  355.         clear_lcd12864();
  356.        
  357.         while(1)
  358.         {
  359.                 lcd12864_dis();
  360.         }       
  361. }
復制代碼



全部資料51hei下載地址：
18b20.zip (53.16 KB, 下載次數: 84)

作者: bfzy123    時間: 2020-10-2 23:25
樓主你這個程序，我想知道硬件接線怎么接的呢？12864的屏，接多少根線呢？
作者: 電子愛好者我    時間: 2020-10-8 14:53
bfzy123 發表于 2020-10-2 23:25
樓主你這個程序，我想知道硬件接線怎么接的呢？12864的屏，接多少根線呢？

接線定義圖

接線定義.png (61.05 KB, 下載次數: 72)

接線定義.png
作者: 電子愛好者我    時間: 2020-10-8 14:53
bfzy123 發表于 2020-10-2 23:25
樓主你這個程序，我想知道硬件接線怎么接的呢？12864的屏，接多少根線呢？

20根線都接了
作者: jjwangxu2008    時間: 2020-10-9 11:40
太好了  正好需要這個呢�。。�！
作者: 電子愛好者我    時間: 2020-10-12 08:33
jjwangxu2008 發表于 2020-10-9 11:40
太好了  正好需要這個呢�。。�！

一起學習
作者: 周99    時間: 2020-12-1 09:08
可以給仿真圖嗎
作者: zhangleixbyl    時間: 2021-1-14 21:28
屏怎么接啊，沒圖看不懂
作者: 啤酒瓶子老大    時間: 2021-3-9 21:03
感謝分享。留個記號。



歡迎光臨 (http://www.torrancerestoration.com/bbs/) Powered by Discuz! X3.1