標題: 很強悍的單片機OLED函數,還可以顯示數碼管字體 [打印本頁]
作者: xjx51    時間: 2021-3-28 19:22
標題: 很強悍的單片機OLED函數,還可以顯示數碼管字體
以下是我從網上找的函數，東拼西湊起來的。還可以顯示數碼管字體哦！
OLED驅動函數：


  3. #include "codetab.h"
  4. // ------------------------------------------------------------
  5. // IO口模擬I2C通信
  6. // SCL接P1^3
  7. // SDA接P1^2
  8. // ------------------------------------------------------------

  10. sbit SCL1 =P1^4; //串行時鐘
  11. sbit SDA1 =P1^3;
  12. #define high 1
  13. #define low 0

  15. #define X_WIDTH         128
  16. #define Y_WIDTH         64
  17. /*********************OLED驅動程序用的延時程序************************************/
  18. void delay(unsigned long z)
  19. {
  20.         unsigned int x,y;
  21.         for(x=z;x>0;x--)
  22.                 for(y=110;y>0;y--);

  24. }

  26. /**********************************************
  27. //IIC Start
  28. **********************************************/
  29. void IIC_Start()
  30. {
  31.    SCL1 = high;               
  32.    SDA1 = high;
  33.    SDA1 = low;
  34.    SCL1 = low;
  35. }

  37. /**********************************************
  38. //IIC Stop
  39. **********************************************/
  40. void IIC_Stop()
  41. {
  42.    SCL1 = low;
  43.    SDA1 = low;
  44.    SCL1 = high;
  45.    SDA1 = high;
  46. }

  48. /**********************************************
  49. // 通過I2C總線寫一個字節
  50. **********************************************/
  51. void Write_IIC_Byte(unsigned char IIC_Byte)
  52. {
  53.         unsigned char i;
  54.         for(i=0;i<8;i++)
  55.         {
  56.                 if(IIC_Byte & 0x80)
  57.                         SDA1=high;
  58.                 else
  59.                         SDA1=low;
  60.                 SCL1=high;
  61.                 SCL1=low;
  62.                 IIC_Byte<<=1;
  63.         }
  64.         SDA1=1;
  65.         SCL1=1;
  66.         SCL1=0;
  67. }

  69. /*********************OLED寫數據************************************/
  70. void OLED_WrDat(unsigned char IIC_Data)
  71. {
  72.         IIC_Start();
  73.         Write_IIC_Byte(0x78);
  74.         Write_IIC_Byte(0x40);                        //write data
  75.         Write_IIC_Byte(IIC_Data);
  76.         IIC_Stop();
  77. }
  78. /*********************OLED寫命令************************************/
  79. void OLED_WrCmd(unsigned char IIC_Command)
  80. {
  81.         IIC_Start();
  82.         Write_IIC_Byte(0x78);            //Slave address,SA0=0
  83.         Write_IIC_Byte(0x00);                        //write command
  84.         Write_IIC_Byte(IIC_Command);
  85.         IIC_Stop();
  86. }
  87. /*********************OLED 設置坐標************************************/
  88. void OLED_Set_Pos(unsigned char x, unsigned char y)
  89. {
  90.         OLED_WrCmd(0xb0+y);
  91.         OLED_WrCmd(((x&0xf0)>>4)|0x10);
  92.         OLED_WrCmd((x&0x0f)|0x01);
  93. }
  94. /*全屏顯示*/
  95. void OLED_Fill(unsigned char bmp_dat)
  96. {
  97.         unsigned char y,x;
  98.         for(y=0;y<8;y++)
  99.         {
  100.                 OLED_WrCmd(0xb0+y);
  101.                 OLED_WrCmd(0x01);
  102.                 OLED_WrCmd(0x10);
  103.                 for(x=0;x<X_WIDTH;x++)
  104.                 OLED_WrDat(bmp_dat);
  105.         }
  106. }
  107. /*********************OLED復位************************************/
  108. void OLED_CLS(void)
  109. {
  110.         unsigned char y,x;
  111.         for(y=0;y<8;y++)
  112.         {
  113.                 OLED_WrCmd(0xb0+y);
  114.                 OLED_WrCmd(0x01);
  115.                 OLED_WrCmd(0x10);
  116.                 for(x=0;x<X_WIDTH;x++)
  117.                 OLED_WrDat(0);
  118.         }
  119. }
  120. /*清屏——慢*/
  121. void OLED_CLSX(void)
  122. {
  123.         unsigned char y,x;
  124.         for(y=0;y<8;y++)
  125.         {
  126.                 delay(300);
  127.                 OLED_WrCmd(0xb0+y);
  128.                 OLED_WrCmd(0x01);
  129.                 OLED_WrCmd(0x10);
  130.                 for(x=0;x<X_WIDTH;x++)
  131.                 OLED_WrDat(0);
  132.         }
  133. }
  134. //--------------------------------------------------------------
  135. // Prototype      : void OLED_ON(void)
  136. // Calls          :
  137. // Parameters     : none
  138. // Description    : 將OLED從休眠中喚醒
  139. //--------------------------------------------------------------
  140. void OLED_ON(void)
  141. {
  142.         OLED_WrCmd(0X8D);  //設置電荷泵
  143.         OLED_WrCmd(0X14);  //開啟電荷泵
  144.         OLED_WrCmd(0XAF);  //OLED喚醒
  145. }

  147. //--------------------------------------------------------------
  148. // Prototype      : void OLED_OFF(void)
  149. // Calls          :
  150. // Parameters     : none
  151. // Description    : 讓OLED休眠 -- 休眠模式下,OLED功耗不到10uA
  152. //--------------------------------------------------------------
  153. void OLED_OFF(void)
  154. {
  155.         OLED_WrCmd(0X8D);  //設置電荷泵
  156.         OLED_WrCmd(0X10);  //關閉電荷泵
  157.         OLED_WrCmd(0XAE);  //OLED休眠
  158. }
  159. /*調節亮度（Brightness取值0x00~0xff）*/
  160. void OLED_Brightnes(unsigned char Brightness)
  161. {
  162.       OLED_WrCmd(0x81);//--set contrast control register
  163.           OLED_WrCmd(Brightness);
  164. }
  165. /*********************OLED初始化************************************/
  166. void OLED_Init(void)
  167. {
  168.         delay(500);//初始化之前的延時很重要！
  169.         OLED_WrCmd(0xae);//--turn off oled panel
  170.         OLED_WrCmd(0x00);//---set low column address
  171.         OLED_WrCmd(0x10);//---set high column address
  172.         OLED_WrCmd(0x40);//--set start line address  Set Mapping RAM Display Start Line (0x00~0x3F)
  173. //        OLED_WrCmd(0x81);//--set contrast control register
  174. //        OLED_WrCmd(Brightness); // Set SEG Output Current Brightness
  175.         OLED_WrCmd(0xa1);//--Set SEG/Column Mapping     0xa0左右反置 0xa1正常
  176.         OLED_WrCmd(0xc8);//Set COM/Row Scan Direction   0xc0上下反置 0xc8正常
  177.         OLED_WrCmd(0xa6);//--set normal display
  178.         OLED_WrCmd(0xa8);//--set multiplex ratio(1 to 64)
  179.         OLED_WrCmd(0x3f);//--1/64 duty
  180.         OLED_WrCmd(0xd3);//-set display offset        Shift Mapping RAM Counter (0x00~0x3F)
  181.         OLED_WrCmd(0x00);//-not offset
  182.         OLED_WrCmd(0xd5);//--set display clock divide ratio/oscillator frequency
  183.         OLED_WrCmd(0x80);//--set divide ratio, Set Clock as 100 Frames/Sec
  184.         OLED_WrCmd(0xd9);//--set pre-charge period
  185.         OLED_WrCmd(0xf1);//Set Pre-Charge as 15 Clocks & Discharge as 1 Clock
  186.         OLED_WrCmd(0xda);//--set com pins hardware configuration
  187.         OLED_WrCmd(0x12);
  188.         OLED_WrCmd(0xdb);//--set vcomh
  189.         OLED_WrCmd(0x40);//Set VCOM Deselect Level
  190.         OLED_WrCmd(0x20);//-Set Page Addressing Mode (0x00/0x01/0x02)
  191.         OLED_WrCmd(0x02);//
  192.         OLED_WrCmd(0x8d);//--set Charge Pump enable/disable
  193.         OLED_WrCmd(0x14);//--set(0x10) disable
  194.         OLED_WrCmd(0xa4);// Disable Entire Display On (0xa4/0xa5)
  195.         OLED_WrCmd(0xa6);// Disable Inverse Display On (0xa6/a7)
  196.         OLED_WrCmd(0xaf);//--turn on oled panel
  197.         OLED_Fill(0x00); //初始清屏
  198.         OLED_Set_Pos(0,0);
  199. }
  200. void OLED_P8x16Str(unsigned char x, y,unsigned char ch[])
  201. {
  202.         unsigned char c=0,i=0,j=0;
  203.         while (ch[j]!='\0')
  204.         {
  205.                 c =ch[j]-32;
  206.                 if(x>120){x=0;y++;}
  207.                 OLED_Set_Pos(x,y);
  208.                 for(i=0;i<8;i++)
  209.                 OLED_WrDat(F8X16[c*16+i]);
  210.                 OLED_Set_Pos(x,y+1);
  211.                 for(i=0;i<8;i++)
  212.                 OLED_WrDat(F8X16[c*16+i+8]);
  213.                 x+=8;
  214.                 j++;
  215.         }
  216. }
  217. /*****************功能描述：顯示16*16點陣  顯示的坐標（x,y），y為頁范圍0～7****************************/
  218. void OLED_P16x16Ch(unsigned char x, y, N)
  219. {
  220.         unsigned char wm=0;
  221.         unsigned int adder=32*N;
  222.         OLED_Set_Pos(x , y);
  223.         for(wm = 0;wm < 16;wm++)
  224.         {
  225.                 OLED_WrDat(F16x16[adder]);
  226.                 adder += 1;
  227.         }
  228.         OLED_Set_Pos(x,y + 1);
  229.         for(wm = 0;wm < 16;wm++)
  230.         {
  231.                 OLED_WrDat(F16x16[adder]);
  232.                 adder += 1;
  233.         }                  
  234. }
  235. /*顯示數碼管字體（10是冒號，11是不顯示）*/
  236. void OLED_P16x32Ch(unsigned char x, y, N)
  237. {
  238.     unsigned char a;
  239.         switch(N)
  240.         {
  241.             case(0):a=0;break;
  242.                 case(1):a=2;break;
  243.                 case(2):a=4;break;
  244.                 case(3):a=6;break;
  245.                 case(4):a=8;break;
  246.                 case(5):a=10;break;
  247.                 case(6):a=12;break;
  248.                 case(7):a=14;break;
  249.                 case(8):a=16;break;
  250.                 case(9):a=18;break;
  251.                 case(10):a=20;break;
  252.                 case(11):a=22;break;
  253.         }
  254.           OLED_P16x16Ch(x, y, a);
  255.         switch(N)
  256.         {
  257.             case(0):a=1;break;
  258.                 case(1):a=3;break;
  259.                 case(2):a=5;break;
  260.                 case(3):a=7;break;
  261.                 case(4):a=9;break;
  262.                 case(5):a=11;break;
  263.                 case(6):a=13;break;
  264.                 case(7):a=15;break;
  265.                 case(8):a=17;break;
  266.                 case(9):a=19;break;
  267.                 case(10):a=21;break;
  268.                 case(11):a=23;break;
  269.         }
  270.         OLED_P16x16Ch(x, y+2, a);
  271. }
  272. /***********功能描述：顯示顯示BMP圖片128×64起始點坐標(x,y),x的范圍0～127，y為頁的范圍0～7*****************/
  273. void Draw_BMP(unsigned char x0, y0,x1, y1,unsigned char BMP[])
  274. {
  275.         unsigned int j=0;
  276.         unsigned char x,y;

  278.   if(y1%8==0) y=y1/8;      
  279.   else y=y1/8+1;
  280.         for(y=y0;y<y1;y++)
  281.         {
  282.                 OLED_Set_Pos(x0,y);
  283.     for(x=x0;x<x1;x++)
  284.             {      
  285.                     OLED_WrDat(BMP[j++]);
  286.             }
  287.         }
  288. }
復制代碼
字庫：


  3. //#include "reg52.h"
  4. /***************************16*16的點陣字體取模方式：共陰——列行式——逆向輸出*********/
  5. /****************************************8*16的點陣************************************/
  6. unsigned char code F16x16[] =                    
  7. {            
  8. 0x00,0xFE,0xFE,0xFE,0x00,0x0E,0x0E,0x0E,0x0E,0x0E,0x0E,0x00,0xFE,0xFE,0xFE,0x00,
  9. 0x00,0x7F,0x7F,0x7F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x7F,0x7F,0x7F,0x00,
  10. 0x00,0xFE,0xFE,0xFE,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFE,0xFE,0xFE,0x00,
  11. 0x00,0x7F,0x7F,0x7F,0x00,0x70,0x70,0x70,0x70,0x70,0x70,0x00,0x7F,0x7F,0x7F,0x00,//SMG0

  13. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFE,0xFE,0xFE,0x00,0x00,0x00,0x00,0x00,0x00,
  14. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x7F,0x7F,0x7F,0x00,0x00,0x00,0x00,0x00,0x00,
  15. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFE,0xFE,0xFE,0x00,0x00,0x00,0x00,0x00,0x00,
  16. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x7F,0x7F,0x7F,0x00,0x00,0x00,0x00,0x00,0x00,//SMG1

  18. 0x00,0x00,0x00,0x00,0x0E,0x0E,0x0E,0x0E,0x0E,0x0E,0x0E,0x00,0xFE,0xFE,0xFE,0x00,
  19. 0x00,0x00,0x00,0x00,0x00,0xC0,0xC0,0xC0,0xC0,0xC0,0xC0,0x00,0x7F,0x7F,0x7F,0x00,
  20. 0x00,0xFE,0xFE,0xFE,0x00,0x03,0x03,0x03,0x03,0x03,0x03,0x00,0x00,0x00,0x00,0x00,
  21. 0x00,0x7F,0x7F,0x7F,0x00,0x70,0x70,0x70,0x70,0x70,0x70,0x70,0x00,0x00,0x00,0x00,//SMG2

  23. 0x00,0x00,0x00,0x0E,0x0E,0x0E,0x0E,0x0E,0x0E,0x0E,0x00,0xFE,0xFE,0xFE,0x00,0x00,
  24. 0x00,0x00,0x00,0xC0,0xC0,0xC0,0xC0,0xC0,0xC0,0xC0,0x00,0x7F,0x7F,0x7F,0x00,0x00,
  25. 0x00,0x00,0x00,0x03,0x03,0x03,0x03,0x03,0x03,0x03,0x00,0xFE,0xFE,0xFE,0x00,0x00,
  26. 0x00,0x00,0x00,0x70,0x70,0x70,0x70,0x70,0x70,0x70,0x00,0x7F,0x7F,0x7F,0x00,0x00,//SMG3


  29. 0x00,0xFE,0xFE,0xFE,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFE,0xFE,0xFE,0x00,
  30. 0x00,0x7F,0x7F,0x7F,0x00,0xC0,0xC0,0xC0,0xC0,0xC0,0xC0,0x00,0x7F,0x7F,0x7F,0x00,
  31. 0x00,0x00,0x00,0x00,0x00,0x03,0x03,0x03,0x03,0x03,0x03,0x00,0xFE,0xFE,0xFE,0x00,
  32. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x7F,0x7F,0x7F,0x00,//SMG4


  35. 0x00,0xFE,0xFE,0xFE,0x00,0x0E,0x0E,0x0E,0x0E,0x0E,0x0E,0x0E,0x00,0x00,0x00,0x00,
  36. 0x00,0x7F,0x7F,0x7F,0x00,0xC0,0xC0,0xC0,0xC0,0xC0,0xC0,0x00,0x00,0x00,0x00,0x00,
  37. 0x00,0x00,0x00,0x00,0x00,0x03,0x03,0x03,0x03,0x03,0x03,0x00,0xFE,0xFE,0xFE,0x00,
  38. 0x00,0x00,0x00,0x00,0x70,0x70,0x70,0x70,0x70,0x70,0x70,0x00,0x7F,0x7F,0x7F,0x00,//SMG5

  40. 0x00,0xFE,0xFE,0xFE,0x00,0x0E,0x0E,0x0E,0x0E,0x0E,0x0E,0x0E,0x00,0x00,0x00,0x00,
  41. 0x00,0x7F,0x7F,0x7F,0x00,0xC0,0xC0,0xC0,0xC0,0xC0,0xC0,0x00,0x00,0x00,0x00,0x00,
  42. 0x00,0xFE,0xFE,0xFE,0x00,0x03,0x03,0x03,0x03,0x03,0x03,0x00,0xFE,0xFE,0xFE,0x00,
  43. 0x00,0x7F,0x7F,0x7F,0x00,0x70,0x70,0x70,0x70,0x70,0x70,0x00,0x7F,0x7F,0x7F,0x00,//SMG6

  45. 0x00,0xFE,0xFE,0xFE,0x00,0x0E,0x0E,0x0E,0x0E,0x0E,0x0E,0x00,0xFE,0xFE,0xFE,0x00,
  46. 0x00,0x7F,0x7F,0x7F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x7F,0x7F,0x7F,0x00,
  47. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFE,0xFE,0xFE,0x00,
  48. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x7F,0x7F,0x7F,0x00,//SMG7

  50. 0x00,0xFE,0xFE,0xFE,0x00,0x0E,0x0E,0x0E,0x0E,0x0E,0x0E,0x00,0xFE,0xFE,0xFE,0x00,
  51. 0x00,0x7F,0x7F,0x7F,0x00,0xC0,0xC0,0xC0,0xC0,0xC0,0xC0,0x00,0x7F,0x7F,0x7F,0x00,
  52. 0x00,0xFE,0xFE,0xFE,0x00,0x03,0x03,0x03,0x03,0x03,0x03,0x00,0xFE,0xFE,0xFE,0x00,
  53. 0x00,0x7F,0x7F,0x7F,0x00,0x70,0x70,0x70,0x70,0x70,0x70,0x00,0x7F,0x7F,0x7F,0x00,//SMG8

  55. 0x00,0xFE,0xFE,0xFE,0x00,0x0E,0x0E,0x0E,0x0E,0x0E,0x0E,0x00,0xFE,0xFE,0xFE,0x00,
  56. 0x00,0x7F,0x7F,0x7F,0x00,0xC0,0xC0,0xC0,0xC0,0xC0,0xC0,0x00,0x7F,0x7F,0x7F,0x00,
  57. 0x00,0x00,0x00,0x00,0x00,0x03,0x03,0x03,0x03,0x03,0x03,0x00,0xFE,0xFE,0xFE,0x00,
  58. 0x00,0x00,0x00,0x00,0x70,0x70,0x70,0x70,0x70,0x70,0x70,0x00,0x7F,0x7F,0x7F,0x00,//SMG9

  60. 0x00,0x00,0x00,0x00,0x00,0xC0,0xC0,0xC0,0xC0,0xC0,0xC0,0x00,0x00,0x00,0x00,0x00,
  61. 0x00,0x00,0x00,0x00,0x00,0x07,0x07,0x07,0x07,0x07,0x07,0x00,0x00,0x00,0x00,0x00,
  62. 0x00,0x00,0x00,0x00,0x00,0xE0,0xE0,0xE0,0xE0,0xE0,0xE0,0x00,0x00,0x00,0x00,0x00,
  63. 0x00,0x00,0x00,0x00,0x00,0x03,0x03,0x03,0x03,0x03,0x03,0x00,0x00,0x00,0x00,0x00,//smg.

  65. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  66. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  67. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  68. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//未命名文件0,


  71. 0x00,0xFE,0xFE,0xFE,0x00,0x0E,0x0E,0x0E,0x0E,0x0E,0x0E,0x00,0xFE,0xFE,0xFE,0x00,
  72. 0x00,0x7F,0x7F,0x7F,0x00,0xC0,0xC0,0xC0,0xC0,0xC0,0xC0,0x00,0x7F,0x7F,0x7F,0x00,
  73. 0x00,0x00,0x00,0x00,0x00,0x03,0x03,0x03,0x03,0x03,0x03,0x00,0xFE,0xFE,0xFE,0x00,
  74. 0x00,0x00,0x00,0x00,0x70,0x70,0x70,0x70,0x70,0x70,0x70,0x00,0x7F,0x7F,0x7F,0x00,//F:\產品開發\3_小手表\CX\圖片取模\SMG8.BMP0,



  78. 0x40,0x40,0x42,0xCC,0x00,0x40,0xA0,0x9E,0x82,0x82,0x82,0x9E,0xA0,0x20,0x20,0x00,
  79. 0x00,0x00,0x00,0x3F,0x90,0x88,0x40,0x43,0x2C,0x10,0x28,0x46,0x41,0x80,0x80,0x00,//設26,

  81. 0x00,0x17,0x15,0xD5,0x55,0x57,0x55,0x7D,0x55,0x57,0x55,0xD5,0x15,0x17,0x00,0x00,
  82. 0x40,0x40,0x40,0x7F,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x7F,0x40,0x40,0x40,0x00,//置27,

  84. 0x00,0x00,0x00,0xFE,0x82,0x82,0x82,0x82,0x82,0x82,0x82,0xFE,0x00,0x00,0x00,0x00,
  85. 0x00,0x00,0x00,0xFF,0x40,0x40,0x40,0x40,0x40,0x40,0x40,0xFF,0x00,0x00,0x00,0x00,//日28,

  87. 0x00,0x00,0xFE,0x02,0x42,0x42,0x42,0x42,0xFA,0x42,0x42,0x42,0x42,0xC2,0x02,0x00,
  88. 0x80,0x60,0x1F,0x80,0x40,0x20,0x18,0x06,0x01,0x00,0x40,0x80,0x40,0x3F,0x00,0x00,//歷29,


  91. 0x00,0x80,0x60,0xF8,0x07,0x00,0x04,0x24,0x24,0x25,0x26,0x24,0x24,0x24,0x04,0x00,
  92. 0x01,0x00,0x00,0xFF,0x00,0x00,0x00,0xF9,0x49,0x49,0x49,0x49,0x49,0xF9,0x00,0x00,//信30,

  94. 0x00,0x00,0x00,0xFC,0x54,0x54,0x56,0x55,0x54,0x54,0x54,0xFC,0x00,0x00,0x00,0x00,
  95. 0x40,0x30,0x00,0x03,0x39,0x41,0x41,0x45,0x59,0x41,0x41,0x73,0x00,0x08,0x30,0x00,//息31,

  97. 0x00,0x04,0x04,0x74,0x54,0x54,0x55,0x56,0x54,0x54,0x54,0x74,0x04,0x04,0x00,0x00,
  98. 0x84,0x83,0x41,0x21,0x1D,0x05,0x05,0x05,0x05,0x05,0x7D,0x81,0x81,0x85,0xE3,0x00,//亮32,

  100. 0x00,0x00,0xFC,0x24,0x24,0x24,0xFC,0x25,0x26,0x24,0xFC,0x24,0x24,0x24,0x04,0x00,
  101. 0x40,0x30,0x8F,0x80,0x84,0x4C,0x55,0x25,0x25,0x25,0x55,0x4C,0x80,0x80,0x80,0x00,//度33,


  104. 0x80,0x60,0xF8,0x07,0x04,0xE4,0x24,0x24,0x24,0xFF,0x24,0x24,0x24,0xE4,0x04,0x00,
  105. 0x00,0x00,0xFF,0x00,0x80,0x81,0x45,0x29,0x11,0x2F,0x41,0x41,0x81,0x81,0x80,0x00,//使34,

  107. 0x00,0x00,0xFE,0x22,0x22,0x22,0x22,0xFE,0x22,0x22,0x22,0x22,0xFE,0x00,0x00,0x00,
  108. 0x80,0x60,0x1F,0x02,0x02,0x02,0x02,0x7F,0x02,0x02,0x42,0x82,0x7F,0x00,0x00,0x00,//用35,

  110. 0x40,0x40,0x42,0xCC,0x00,0x00,0xF1,0x16,0x10,0x10,0x18,0x14,0xF3,0x00,0x00,0x00,
  111. 0x00,0x00,0x00,0x3F,0x90,0x48,0x21,0x19,0x07,0x01,0x3F,0x41,0x41,0x40,0x70,0x00,//說36,

  113. 0x00,0xFC,0x44,0x44,0x44,0xFC,0x00,0x00,0xFE,0x22,0x22,0x22,0x22,0xFE,0x00,0x00,
  114. 0x00,0x0F,0x04,0x04,0x04,0x8F,0x40,0x30,0x0F,0x02,0x02,0x42,0x82,0x7F,0x00,0x00,//明37,
  115. };
  116. unsigned char code F8X16[]=         
  117. {
  118.   0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,// 0
  119.   0x00,0x00,0x00,0xF8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x33,0x30,0x00,0x00,0x00,//! 1
  120.   0x00,0x10,0x0C,0x06,0x10,0x0C,0x06,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//" 2
  121.   0x40,0xC0,0x78,0x40,0xC0,0x78,0x40,0x00,0x04,0x3F,0x04,0x04,0x3F,0x04,0x04,0x00,//# 3
  122.   0x00,0x70,0x88,0xFC,0x08,0x30,0x00,0x00,0x00,0x18,0x20,0xFF,0x21,0x1E,0x00,0x00,//$ 4
  123.   0xF0,0x08,0xF0,0x00,0xE0,0x18,0x00,0x00,0x00,0x21,0x1C,0x03,0x1E,0x21,0x1E,0x00,//% 5
  124.   0x00,0xF0,0x08,0x88,0x70,0x00,0x00,0x00,0x1E,0x21,0x23,0x24,0x19,0x27,0x21,0x10,//& 6
  125.   0x10,0x16,0x0E,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//' 7
  126.   0x00,0x00,0x00,0xE0,0x18,0x04,0x02,0x00,0x00,0x00,0x00,0x07,0x18,0x20,0x40,0x00,//( 8
  127.   0x00,0x02,0x04,0x18,0xE0,0x00,0x00,0x00,0x00,0x40,0x20,0x18,0x07,0x00,0x00,0x00,//) 9
  128.   0x40,0x40,0x80,0xF0,0x80,0x40,0x40,0x00,0x02,0x02,0x01,0x0F,0x01,0x02,0x02,0x00,//* 10
  129.   0x00,0x00,0x00,0xF0,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x1F,0x01,0x01,0x01,0x00,//+ 11
  130.   0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0xB0,0x70,0x00,0x00,0x00,0x00,0x00,//, 12
  131.   0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x01,0x01,0x01,0x01,//- 13
  132.   0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00,0x00,0x00,//. 14
  133.   0x00,0x00,0x00,0x00,0x80,0x60,0x18,0x04,0x00,0x60,0x18,0x06,0x01,0x00,0x00,0x00,/// 15
  134.   0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x0F,0x10,0x20,0x20,0x10,0x0F,0x00,//0 16
  135.   0x00,0x10,0x10,0xF8,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//1 17
  136.   0x00,0x70,0x08,0x08,0x08,0x88,0x70,0x00,0x00,0x30,0x28,0x24,0x22,0x21,0x30,0x00,//2 18
  137.   0x00,0x30,0x08,0x88,0x88,0x48,0x30,0x00,0x00,0x18,0x20,0x20,0x20,0x11,0x0E,0x00,//3 19
  138.   0x00,0x00,0xC0,0x20,0x10,0xF8,0x00,0x00,0x00,0x07,0x04,0x24,0x24,0x3F,0x24,0x00,//4 20
  139.   0x00,0xF8,0x08,0x88,0x88,0x08,0x08,0x00,0x00,0x19,0x21,0x20,0x20,0x11,0x0E,0x00,//5 21
  140.   0x00,0xE0,0x10,0x88,0x88,0x18,0x00,0x00,0x00,0x0F,0x11,0x20,0x20,0x11,0x0E,0x00,//6 22
  141.   0x00,0x38,0x08,0x08,0xC8,0x38,0x08,0x00,0x00,0x00,0x00,0x3F,0x00,0x00,0x00,0x00,//7 23
  142.   0x00,0x70,0x88,0x08,0x08,0x88,0x70,0x00,0x00,0x1C,0x22,0x21,0x21,0x22,0x1C,0x00,//8 24
  143.   0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x00,0x31,0x22,0x22,0x11,0x0F,0x00,//9 25
  144.   0x00,0x00,0x00,0xC0,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00,//: 26
  145.   0x00,0x00,0x00,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x60,0x00,0x00,0x00,0x00,//; 27
  146.   0x00,0x00,0x80,0x40,0x20,0x10,0x08,0x00,0x00,0x01,0x02,0x04,0x08,0x10,0x20,0x00,//< 28
  147.   0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x00,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x00,//= 29
  148.   0x00,0x08,0x10,0x20,0x40,0x80,0x00,0x00,0x00,0x20,0x10,0x08,0x04,0x02,0x01,0x00,//> 30
  149.   0x00,0x70,0x48,0x08,0x08,0x08,0xF0,0x00,0x00,0x00,0x00,0x30,0x36,0x01,0x00,0x00,//? 31
  150.   0xC0,0x30,0xC8,0x28,0xE8,0x10,0xE0,0x00,0x07,0x18,0x27,0x24,0x23,0x14,0x0B,0x00,//@ 32
  151.   0x00,0x00,0xC0,0x38,0xE0,0x00,0x00,0x00,0x20,0x3C,0x23,0x02,0x02,0x27,0x38,0x20,//A 33
  152.   0x08,0xF8,0x88,0x88,0x88,0x70,0x00,0x00,0x20,0x3F,0x20,0x20,0x20,0x11,0x0E,0x00,//B 34
  153.   0xC0,0x30,0x08,0x08,0x08,0x08,0x38,0x00,0x07,0x18,0x20,0x20,0x20,0x10,0x08,0x00,//C 35
  154.   0x08,0xF8,0x08,0x08,0x08,0x10,0xE0,0x00,0x20,0x3F,0x20,0x20,0x20,0x10,0x0F,0x00,//D 36
  155.   0x08,0xF8,0x88,0x88,0xE8,0x08,0x10,0x00,0x20,0x3F,0x20,0x20,0x23,0x20,0x18,0x00,//E 37
  156.   0x08,0xF8,0x88,0x88,0xE8,0x08,0x10,0x00,0x20,0x3F,0x20,0x00,0x03,0x00,0x00,0x00,//F 38
  157.   0xC0,0x30,0x08,0x08,0x08,0x38,0x00,0x00,0x07,0x18,0x20,0x20,0x22,0x1E,0x02,0x00,//G 39
  158.   0x08,0xF8,0x08,0x00,0x00,0x08,0xF8,0x08,0x20,0x3F,0x21,0x01,0x01,0x21,0x3F,0x20,//H 40
  159.   0x00,0x08,0x08,0xF8,0x08,0x08,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//I 41
  160.   0x00,0x00,0x08,0x08,0xF8,0x08,0x08,0x00,0xC0,0x80,0x80,0x80,0x7F,0x00,0x00,0x00,//J 42
  161.   0x08,0xF8,0x88,0xC0,0x28,0x18,0x08,0x00,0x20,0x3F,0x20,0x01,0x26,0x38,0x20,0x00,//K 43
  162.   0x08,0xF8,0x08,0x00,0x00,0x00,0x00,0x00,0x20,0x3F,0x20,0x20,0x20,0x20,0x30,0x00,//L 44
  163.   0x08,0xF8,0xF8,0x00,0xF8,0xF8,0x08,0x00,0x20,0x3F,0x00,0x3F,0x00,0x3F,0x20,0x00,//M 45
  164.   0x08,0xF8,0x30,0xC0,0x00,0x08,0xF8,0x08,0x20,0x3F,0x20,0x00,0x07,0x18,0x3F,0x00,//N 46
  165.   0xE0,0x10,0x08,0x08,0x08,0x10,0xE0,0x00,0x0F,0x10,0x20,0x20,0x20,0x10,0x0F,0x00,//O 47
  166.   0x08,0xF8,0x08,0x08,0x08,0x08,0xF0,0x00,0x20,0x3F,0x21,0x01,0x01,0x01,0x00,0x00,//P 48
  167.   0xE0,0x10,0x08,0x08,0x08,0x10,0xE0,0x00,0x0F,0x18,0x24,0x24,0x38,0x50,0x4F,0x00,//Q 49
  168.   0x08,0xF8,0x88,0x88,0x88,0x88,0x70,0x00,0x20,0x3F,0x20,0x00,0x03,0x0C,0x30,0x20,//R 50
  169.   0x00,0x70,0x88,0x08,0x08,0x08,0x38,0x00,0x00,0x38,0x20,0x21,0x21,0x22,0x1C,0x00,//S 51
  170.   0x18,0x08,0x08,0xF8,0x08,0x08,0x18,0x00,0x00,0x00,0x20,0x3F,0x20,0x00,0x00,0x00,//T 52
  171.   0x08,0xF8,0x08,0x00,0x00,0x08,0xF8,0x08,0x00,0x1F,0x20,0x20,0x20,0x20,0x1F,0x00,//U 53
  172.   0x08,0x78,0x88,0x00,0x00,0xC8,0x38,0x08,0x00,0x00,0x07,0x38,0x0E,0x01,0x00,0x00,//V 54
  173.   0xF8,0x08,0x00,0xF8,0x00,0x08,0xF8,0x00,0x03,0x3C,0x07,0x00,0x07,0x3C,0x03,0x00,//W 55
  174.   0x08,0x18,0x68,0x80,0x80,0x68,0x18,0x08,0x20,0x30,0x2C,0x03,0x03,0x2C,0x30,0x20,//X 56
  175.   0x08,0x38,0xC8,0x00,0xC8,0x38,0x08,0x00,0x00,0x00,0x20,0x3F,0x20,0x00,0x00,0x00,//Y 57
  176.   0x10,0x08,0x08,0x08,0xC8,0x38,0x08,0x00,0x20,0x38,0x26,0x21,0x20,0x20,0x18,0x00,//Z 58
  177.   0x00,0x00,0x00,0xFE,0x02,0x02,0x02,0x00,0x00,0x00,0x00,0x7F,0x40,0x40,0x40,0x00,//[ 59
  178.   0x00,0x0C,0x30,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x06,0x38,0xC0,0x00,//\ 60
  179.   0x00,0x02,0x02,0x02,0xFE,0x00,0x00,0x00,0x00,0x40,0x40,0x40,0x7F,0x00,0x00,0x00,//] 61
  180.   0x00,0x00,0x04,0x02,0x02,0x02,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//^ 62
  181.   0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,//_ 63
  182.   0x00,0x02,0x02,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//` 64
  183.   0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x19,0x24,0x22,0x22,0x22,0x3F,0x20,//a 65
  184.   0x08,0xF8,0x00,0x80,0x80,0x00,0x00,0x00,0x00,0x3F,0x11,0x20,0x20,0x11,0x0E,0x00,//b 66
  185.   0x00,0x00,0x00,0x80,0x80,0x80,0x00,0x00,0x00,0x0E,0x11,0x20,0x20,0x20,0x11,0x00,//c 67
  186.   0x00,0x00,0x00,0x80,0x80,0x88,0xF8,0x00,0x00,0x0E,0x11,0x20,0x20,0x10,0x3F,0x20,//d 68
  187.   0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x1F,0x22,0x22,0x22,0x22,0x13,0x00,//e 69
  188.   0x00,0x80,0x80,0xF0,0x88,0x88,0x88,0x18,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//f 70
  189.   0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x6B,0x94,0x94,0x94,0x93,0x60,0x00,//g 71
  190.   0x08,0xF8,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x3F,0x21,0x00,0x00,0x20,0x3F,0x20,//h 72
  191.   0x00,0x80,0x98,0x98,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//i 73
  192.   0x00,0x00,0x00,0x80,0x98,0x98,0x00,0x00,0x00,0xC0,0x80,0x80,0x80,0x7F,0x00,0x00,//j 74
  193.   0x08,0xF8,0x00,0x00,0x80,0x80,0x80,0x00,0x20,0x3F,0x24,0x02,0x2D,0x30,0x20,0x00,//k 75
  194.   0x00,0x08,0x08,0xF8,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//l 76
  195.   0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x20,0x3F,0x20,0x00,0x3F,0x20,0x00,0x3F,//m 77
  196.   0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x3F,0x21,0x00,0x00,0x20,0x3F,0x20,//n 78
  197.   0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x1F,0x20,0x20,0x20,0x20,0x1F,0x00,//o 79
  198.   0x80,0x80,0x00,0x80,0x80,0x00,0x00,0x00,0x80,0xFF,0xA1,0x20,0x20,0x11,0x0E,0x00,//p 80
  199.   0x00,0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x0E,0x11,0x20,0x20,0xA0,0xFF,0x80,//q 81
  200.   0x80,0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x20,0x20,0x3F,0x21,0x20,0x00,0x01,0x00,//r 82
  201.   0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x33,0x24,0x24,0x24,0x24,0x19,0x00,//s 83
  202.   0x00,0x80,0x80,0xE0,0x80,0x80,0x00,0x00,0x00,0x00,0x00,0x1F,0x20,0x20,0x00,0x00,//t 84
  203.   0x80,0x80,0x00,0x00,0x00,0x80,0x80,0x00,0x00,0x1F,0x20,0x20,0x20,0x10,0x3F,0x20,//u 85
  204.   0x80,0x80,0x80,0x00,0x00,0x80,0x80,0x80,0x00,0x01,0x0E,0x30,0x08,0x06,0x01,0x00,//v 86
  205.   0x80,0x80,0x00,0x80,0x00,0x80,0x80,0x80,0x0F,0x30,0x0C,0x03,0x0C,0x30,0x0F,0x00,//w 87
  206.   0x00,0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x31,0x2E,0x0E,0x31,0x20,0x00,//x 88
  207.   0x80,0x80,0x80,0x00,0x00,0x80,0x80,0x80,0x80,0x81,0x8E,0x70,0x18,0x06,0x01,0x00,//y 89
  208.   0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x21,0x30,0x2C,0x22,0x21,0x30,0x00,//z 90
  209.   0x00,0x00,0x00,0x00,0x80,0x7C,0x02,0x02,0x00,0x00,0x00,0x00,0x00,0x3F,0x40,0x40,//{ 91
  210.   0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,//| 92
  211.   0x00,0x02,0x02,0x7C,0x80,0x00,0x00,0x00,0x00,0x40,0x40,0x3F,0x00,0x00,0x00,0x00,//} 93
  212.   0x00,0x06,0x01,0x01,0x02,0x02,0x04,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//~ 94
  213. };
復制代碼
希望能幫助到各位！



作者: xjx51    時間: 2021-3-28 19:25
說明一下：void OLED_Brightnes(unsigned char Brightness)函數可以調節亮度，取值0x00屏幕就不顯示了！
作者: engineerarui    時間: 2021-3-30 09:52
https://blog.csdn.net/yagnruinihao/article/details/47133455這是我自己做的實驗
作者: xjx51    時間: 2021-8-5 14:58
補充一下，中文字庫數碼管字體只用這些就夠了，如果要顯示別的漢子在加。
/***************************16*16的點陣字體取模方式：共陰——列行式——逆向輸出*********/
/****************************************8*16的點陣************************************/
unsigned char code F16x16[] =                    
{            
0x00,0xFE,0xFE,0xFE,0x00,0x0E,0x0E,0x0E,0x0E,0x0E,0x0E,0x00,0xFE,0xFE,0xFE,0x00,
0x00,0x7F,0x7F,0x7F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x7F,0x7F,0x7F,0x00,
0x00,0xFE,0xFE,0xFE,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFE,0xFE,0xFE,0x00,
0x00,0x7F,0x7F,0x7F,0x00,0x70,0x70,0x70,0x70,0x70,0x70,0x00,0x7F,0x7F,0x7F,0x00,//SMG0

0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFE,0xFE,0xFE,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x7F,0x7F,0x7F,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFE,0xFE,0xFE,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x7F,0x7F,0x7F,0x00,0x00,0x00,0x00,0x00,0x00,//SMG1

0x00,0x00,0x00,0x00,0x0E,0x0E,0x0E,0x0E,0x0E,0x0E,0x0E,0x00,0xFE,0xFE,0xFE,0x00,
0x00,0x00,0x00,0x00,0x00,0xC0,0xC0,0xC0,0xC0,0xC0,0xC0,0x00,0x7F,0x7F,0x7F,0x00,
0x00,0xFE,0xFE,0xFE,0x00,0x03,0x03,0x03,0x03,0x03,0x03,0x00,0x00,0x00,0x00,0x00,
0x00,0x7F,0x7F,0x7F,0x00,0x70,0x70,0x70,0x70,0x70,0x70,0x70,0x00,0x00,0x00,0x00,//SMG2

0x00,0x00,0x00,0x0E,0x0E,0x0E,0x0E,0x0E,0x0E,0x0E,0x00,0xFE,0xFE,0xFE,0x00,0x00,
0x00,0x00,0x00,0xC0,0xC0,0xC0,0xC0,0xC0,0xC0,0xC0,0x00,0x7F,0x7F,0x7F,0x00,0x00,
0x00,0x00,0x00,0x03,0x03,0x03,0x03,0x03,0x03,0x03,0x00,0xFE,0xFE,0xFE,0x00,0x00,
0x00,0x00,0x00,0x70,0x70,0x70,0x70,0x70,0x70,0x70,0x00,0x7F,0x7F,0x7F,0x00,0x00,//SMG3


0x00,0xFE,0xFE,0xFE,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFE,0xFE,0xFE,0x00,
0x00,0x7F,0x7F,0x7F,0x00,0xC0,0xC0,0xC0,0xC0,0xC0,0xC0,0x00,0x7F,0x7F,0x7F,0x00,
0x00,0x00,0x00,0x00,0x00,0x03,0x03,0x03,0x03,0x03,0x03,0x00,0xFE,0xFE,0xFE,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x7F,0x7F,0x7F,0x00,//SMG4


0x00,0xFE,0xFE,0xFE,0x00,0x0E,0x0E,0x0E,0x0E,0x0E,0x0E,0x0E,0x00,0x00,0x00,0x00,
0x00,0x7F,0x7F,0x7F,0x00,0xC0,0xC0,0xC0,0xC0,0xC0,0xC0,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x03,0x03,0x03,0x03,0x03,0x03,0x00,0xFE,0xFE,0xFE,0x00,
0x00,0x00,0x00,0x00,0x70,0x70,0x70,0x70,0x70,0x70,0x70,0x00,0x7F,0x7F,0x7F,0x00,//SMG5

0x00,0xFE,0xFE,0xFE,0x00,0x0E,0x0E,0x0E,0x0E,0x0E,0x0E,0x0E,0x00,0x00,0x00,0x00,
0x00,0x7F,0x7F,0x7F,0x00,0xC0,0xC0,0xC0,0xC0,0xC0,0xC0,0x00,0x00,0x00,0x00,0x00,
0x00,0xFE,0xFE,0xFE,0x00,0x03,0x03,0x03,0x03,0x03,0x03,0x00,0xFE,0xFE,0xFE,0x00,
0x00,0x7F,0x7F,0x7F,0x00,0x70,0x70,0x70,0x70,0x70,0x70,0x00,0x7F,0x7F,0x7F,0x00,//SMG6

0x00,0xFE,0xFE,0xFE,0x00,0x0E,0x0E,0x0E,0x0E,0x0E,0x0E,0x00,0xFE,0xFE,0xFE,0x00,
0x00,0x7F,0x7F,0x7F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x7F,0x7F,0x7F,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFE,0xFE,0xFE,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x7F,0x7F,0x7F,0x00,//SMG7

0x00,0xFE,0xFE,0xFE,0x00,0x0E,0x0E,0x0E,0x0E,0x0E,0x0E,0x00,0xFE,0xFE,0xFE,0x00,
0x00,0x7F,0x7F,0x7F,0x00,0xC0,0xC0,0xC0,0xC0,0xC0,0xC0,0x00,0x7F,0x7F,0x7F,0x00,
0x00,0xFE,0xFE,0xFE,0x00,0x03,0x03,0x03,0x03,0x03,0x03,0x00,0xFE,0xFE,0xFE,0x00,
0x00,0x7F,0x7F,0x7F,0x00,0x70,0x70,0x70,0x70,0x70,0x70,0x00,0x7F,0x7F,0x7F,0x00,//SMG8

0x00,0xFE,0xFE,0xFE,0x00,0x0E,0x0E,0x0E,0x0E,0x0E,0x0E,0x00,0xFE,0xFE,0xFE,0x00,
0x00,0x7F,0x7F,0x7F,0x00,0xC0,0xC0,0xC0,0xC0,0xC0,0xC0,0x00,0x7F,0x7F,0x7F,0x00,
0x00,0x00,0x00,0x00,0x00,0x03,0x03,0x03,0x03,0x03,0x03,0x00,0xFE,0xFE,0xFE,0x00,
0x00,0x00,0x00,0x00,0x70,0x70,0x70,0x70,0x70,0x70,0x70,0x00,0x7F,0x7F,0x7F,0x00,//SMG9

0x00,0x00,0x00,0x00,0x00,0xC0,0xC0,0xC0,0xC0,0xC0,0xC0,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x07,0x07,0x07,0x07,0x07,0x07,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0xE0,0xE0,0xE0,0xE0,0xE0,0xE0,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x03,0x03,0x03,0x03,0x03,0x03,0x00,0x00,0x00,0x00,0x00,//smg.

0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//未命名文件0,


0x00,0xFE,0xFE,0xFE,0x00,0x0E,0x0E,0x0E,0x0E,0x0E,0x0E,0x00,0xFE,0xFE,0xFE,0x00,
0x00,0x7F,0x7F,0x7F,0x00,0xC0,0xC0,0xC0,0xC0,0xC0,0xC0,0x00,0x7F,0x7F,0x7F,0x00,
0x00,0x00,0x00,0x00,0x00,0x03,0x03,0x03,0x03,0x03,0x03,0x00,0xFE,0xFE,0xFE,0x00,
0x00,0x00,0x00,0x00,0x70,0x70,0x70,0x70,0x70,0x70,0x70,0x00,0x7F,0x7F,0x7F,0x00,//F:\產品開發\3_小手表\CX\圖片取模\SMG8.
};
作者: zyluglugl    時間: 2021-8-5 19:24
有沒有顯示移動的函數
作者: 1588848    時間: 2021-8-10 21:13
有沒有 把8*8或者16 16的字模強制顯示成32 或者48的函數？
作者: xjx51    時間: 2021-8-15 10:45
1588848 發表于 2021-8-10 21:13
有沒有 把8*8或者16 16的字模強制顯示成32 或者48的函數？

我是個小白，還請多多指教
作者: xjx51    時間: 2021-8-15 10:46
zyluglugl 發表于 2021-8-5 19:24
有沒有顯示移動的函數

還在研究中



歡迎光臨 (http://www.torrancerestoration.com/bbs/) Powered by Discuz! X3.1