国产精品尹人久久久香蕉,又大又肥硕的奶头小说

<dd id="ow20y"></dd><tbody id="ow20y"></tbody>

#include <STC89C5xRC.H>
#include "12864.h"
#include "1302.h"
#include "wenzi.h"
#define uchar unsigned char
#define uint unsigned int
//===============接口定義===============
sbit key1 = P3^2; //確定/設置按鍵
sbit key2 = P3^3; //減鍵
sbit key3 = P3^4; //加鍵
sbit key4 = P3^5; //返回鍵
sbit LED = P2^0; //背光
sbit beep = P2^1; //喇叭
sbit GY=P3^7;
//======================================
uchar year,month,date,xq,hour,minute,second,shi,ge,ge1,shi1,ddd; //時間/鬧鐘相關
uchar t_ss,t_ss1,t_mm,t_hh,t_dd,t_xq,t_yf,t_yy; //走時變量
uchar idata t,danian; //農歷 t:節日顯示跳轉時間 danian判斷12月份大小月
bit idata f0,f1,f2,f3; //反白相關標志
uchar idata setk,setc;
uchar e,k,n;
uchar idata kk,kk1,bgk,bsj,bld;
bit idata w;
uchar idata ta,tb;
bit idata dinga;
//==============延時函數===================
void Delay(int num)
{
while(num--) ;
}
//============反白標志================
void f_qc(void)
{
f0=f1=f2=f3=0;
}
void displaytime(void)
{
year=read_random(DS3231_YEAR);//調用3231時鐘數據中的年數據，從地址0x8d中
WRITE_STRING(3,0,0,year/10,0);
WRITE_STRING(3,1,0,year%10,0);
WRITE_STRING(3,1,1,8,0); //年
month=read_random(DS3231_MONTH);//調用3231時鐘數據中的月數據，從地址0x05中
WRITE_STRING(3,4,0,month/10,0);
WRITE_STRING(3,5,0,month%10,0);
WRITE_STRING(3,3,1,7,0); //月
date=read_random(DS3231_DAY);//從3231芯片中讀取日數據，從地址0x04中
WRITE_STRING(3,8,0,date/10,0);
WRITE_STRING(3,9,0,date%10,0);
WRITE_STRING(3,5,1,6,0); //日
xq=read_random(DS3231_WEEK);//從3231芯片中讀取日數據，從地址0x04中
WRITE_STRING(3,7,1,xq-1,0);
//小時
hour =read_random(DS3231_HOUR); //從3231芯片中讀取小時數據，從地址0x02中
WRITE_STRING(0,0,2,hour/10,0);
WRITE_STRING(0,1,2,hour%10,0);
WRITE_STRING(0,2,2,10,0); //時
//分鐘
minute= read_random(DS3231_MINUTE); //從3231芯片中讀取分鐘數據，從地址0x01中
WRITE_STRING(0,3,2,minute/10,0);
WRITE_STRING(0,4,2,minute%10,0);
WRITE_STRING(0,5,2,10,0); //分
//秒鐘
second =read_random(DS3231_SECOND); //從3231芯片中讀取秒鐘數據，從地址0x01中
WRITE_STRING(0,6,2,second/10,0);
WRITE_STRING(0,7,2,second%10,0);
//WRITE_STRING(3,7,1,xq,c);
}
void Set_time(uchar sel)
{
signed char address,item;
signed char max,mini;
if(sel==0) {WRITE_STRING(2,7,1,8,0);address=DS3231_YEAR; max=99; mini=0;} //年?????
if(sel==1) {WRITE_STRING(2,7,1,7,0);address=DS3231_MONTH; max=12; mini=1;} //月
if(sel==2) {WRITE_STRING(2,7,1,6,0);address=DS3231_DAY; max=31; mini=1;} //日
if(sel==3) {WRITE_STRING(2,7,1,9,0);address=DS3231_WEEK; max=7;mini=1;}//星
if(sel==4) {WRITE_STRING(2,7,1,11,0);address=DS3231_HOUR; max=23;mini=0;}//時
if(sel==5) {WRITE_STRING(2,7,1,12,0);address=DS3231_MINUTE; max=59;mini=0;}//鐘
//讀取3231某地址上的數值轉換成10進制賦給item
item=(read_random(address));
if(key3 == 0){item++;}
if(key4 == 0){item--;}
if(item>max) item=mini;
if(item<mini) item=max;
//write_byte(0, 0x98);//允許寫操作
write_byte(address,(item/10)*16+item%10);//轉換成10進制寫入3231
// write_byte(0x8e,0x80);//寫保護，禁止寫操作
DelayM(20);
displaytime();
}
void main()
{
uchar e=0;
LCD_ST7565_INIT(); //液晶初始化
Lcd12864_ClearScreen(); //清屏
while(1)
{
if(w==0)
{
displaytime();//顯示時間
} //正常走時
else {} //否則啟動調時
//設置鍵------------------------------------------------------------------------
if (key1 == 0) // 設置時間
{
DelayM(20); //按鍵消抖
if(key1 == 0 && w == 1) //當是調時狀態 本鍵用于調整下一項
{
e++;
if (e >= 6 ){e = 0;}
Set_time(e); //調整
}
if(key1 == 0 && w == 0) //當是正常狀態時就進入調時狀態
{
Lcd12864_ClearScreen(); //清屏
w=1; //進入調時
Set_time(e); //調整
}
while(key1 == 0); //等待鍵松開
}
//確認,返回鍵-------------------------------------------------------------------
if (key2 == 0) //在調時狀態時就退出調時
{
DelayM(20); //按鍵消抖
if(key2 == 0 && w == 1)
{
w = 0; //退出調時
e = 0; //"下一項"計數器清0
}
if(key2 == 0 && w == 0)
{
Lcd12864_ClearScreen(); //清屏
while(key2 == 0);
}
Lcd12864_ClearScreen(); //清屏
displaytime(); //顯示時間
while(key2 == 0);
}
//加調整------------------------------------------------------------------------
if (key3 == 0 && w == 1)
{
DelayM(20);
if(key3 == 0 && w == 1) { Set_time(e); }
while(key3 == 0);
}
//減調整------------------------------------------------------------------------
if (key4 == 0 && w == 1)
{
DelayM(20);
if(key4 == 0 && w == 1) { Set_time(e); }
while(key4 == 0);
}
}
/*液晶背光控制，按一下亮，再按一下滅----------------------------------------
if(K5 == 0)
{
DelayM(20); q = ~q; //標志位取反
if(q){BLK = BLK | 1;}
else {BLK = BLK & 0;}
while(K5 == 0);
} */
}

復制代碼