免费人成视频X8X8入口蹭一蹭,a级男女性高爱潮试看,亚洲乱码中文

標題: 有哪位大佬知道我的TIM4的編碼器模式一直無法正常測速 [打印本頁]

作者: WangMC 時間: 2023-6-4 10:47
標題: 有哪位大佬知道我的TIM4的編碼器模式一直無法正常測速

void EncoderT4_Init(void)
{
//編碼器2
RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM4, ENABLE);
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB, ENABLE);

//編碼器A相B相初始化
GPIO_InitTypeDef GPIO_InitStructure;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPU;
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_6 | GPIO_Pin_7;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_Init(GPIOB, &GPIO_InitStructure);

//定時器4初始化
TIM_TimeBaseInitTypeDef TIM_TimeBaseInitStructure;
TIM_TimeBaseInitStructure.TIM_ClockDivision = TIM_CKD_DIV1;
TIM_TimeBaseInitStructure.TIM_CounterMode = TIM_CounterMode_Up;
TIM_TimeBaseInitStructure.TIM_Period = 65536 - 1; //ARR
TIM_TimeBaseInitStructure.TIM_Prescaler = 1 - 1; //PSC
TIM_TimeBaseInitStructure.TIM_RepetitionCounter = 0;
TIM_TimeBaseInit(TIM4, &TIM_TimeBaseInitStructure);

//定時器4編碼器模式初始化
TIM_ICInitTypeDef TIM_ICInitStructure;
TIM_ICStructInit(&TIM_ICInitStructure);
TIM_ICInitStructure.TIM_Channel = TIM_Channel_1;
TIM_ICInitStructure.TIM_ICFilter = 0xF;
TIM_ICInit(TIM4, &TIM_ICInitStructure);
TIM_ICInitStructure.TIM_Channel = TIM_Channel_2;
TIM_ICInitStructure.TIM_ICFilter = 0xF;
TIM_ICInit(TIM4, &TIM_ICInitStructure);

TIM_EncoderInterfaceConfig(TIM4, TIM_EncoderMode_TI12, TIM_ICPolarity_Rising, TIM_ICPolarity_Rising);

TIM_Cmd(TIM4, ENABLE);
}
int16_t Encoder_Get_L(void)
{
int16_t Temp_L;
Temp_L = TIM_GetCounter(TIM4);
TIM_SetCounter(TIM4, 0);
return Temp_L;
}

作者: yzwzfyz 時間: 2023-6-5 11:07
想想：測速原理是什么呢？

作者: ZzCp 時間: 2023-6-8 16:48
void EncoderT4_Init(void)
{
      //編碼器2
      RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM4, ENABLE);
      RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOB, ENABLE);

      //編碼器A相B相初始化
      GPIO_InitTypeDef GPIO_InitStructure;
      GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF;
      GPIO_InitStructure.GPIO_Pin = GPIO_Pin_6 | GPIO_Pin_7;
      GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
      GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
      GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_UP;
      GPIO_Init(GPIOB, &GPIO_InitStructure);

      GPIO_PinAFConfig(GPIOB, GPIO_PinSource6, GPIO_AF_TIM4);
      GPIO_PinAFConfig(GPIOB, GPIO_PinSource7, GPIO_AF_TIM4);

      //定時器4初始化（每個脈沖1us，計數器最大范圍為65535）
      TIM_TimeBaseInitTypeDef TIM_TimeBaseInitStructure;
      TIM_TimeBaseInitStructure.TIM_ClockDivision = TIM_CKD_DIV1;
      TIM_TimeBaseInitStructure.TIM_CounterMode = TIM_CounterMode_Up;
      TIM_TimeBaseInitStructure.TIM_Period = 65535;
      TIM_TimeBaseInitStructure.TIM_Prescaler = 84 - 1;
      TIM_TimeBaseInitStructure.TIM_RepetitionCounter = 0;
      TIM_TimeBaseInit(TIM4, &TIM_TimeBaseInitStructure);

      //定時器4編碼器模式初始化
      TIM_EncoderInterfaceConfig(TIM4, TIM_EncoderMode_TI12, TIM_ICPolarity_Rising, TIM_ICPolarity_Rising);

      TIM_Cmd(TIM4, ENABLE);
}

int16_t Encoder_Get_L(void)
{
      int16_t Temp_L;
      Temp_L = TIM_GetCounter(TIM4);
      TIM_SetCounter(TIM4, 0);
      return Temp_L;
}

作者: WangMC 時間: 2023-6-19 10:20

yzwzfyz 發表于 2023-6-5 11:07
想想：測速原理是什么呢？

是讀取計數器計數值嗎（不是很懂哈哈）但是我讀取的返回值一直是1和-1，不知為何

作者: 13872888583 時間: 2023-6-19 13:23
測速當然用中斷好一點。

作者: WangMC 時間: 2023-6-19 15:08

ZzCp 發表于 2023-6-8 16:48
void EncoderT4_Init(void)
{
//編碼器2

請問為何不需使用這個TIM_ICInitTypeDef結構體

歡迎光臨 (http://www.torrancerestoration.com/bbs/)