影音先锋女人AV鲁色资源网久久,人妻～夫の部下との密かな关系,黄网在线播放网址

標題: 關于DS1302的數據處理問題 [打印本頁]

作者: 作業沒寫 時間: 2015-2-15 16:13
標題: 關于DS1302的數據處理問題
程序是讀DS1302，數碼管顯示
現在遇到的問題是讀取的數據在數碼管顯示的時候只要前一個數據是雙數，后一個數據就會變亂碼

例如aa-bb-cc,如果AA是雙數，BB就會亂碼
上個圖

二樓貼程序，是我數據處理錯了嗎？為什么我一直找不出來= =

作者: 作業沒寫 時間: 2015-2-15 16:13
這是DS1302的驅動文件

#include "ds1302.h"

unsigned char time_buf1[8] = {20,15,3,27,18,15,00,5};//空年月日時分秒周
unsigned char time_buf[8]; //空年月日時分秒周
/*------------------------------------------------
向DS1302寫入一字節數據
------------------------------------------------*/
void Ds1302_Write_Byte(unsigned char addr, unsigned char d)
{

unsigned char i;
RST_SET;

//寫入目標地址：addr
addr = addr & 0xFE; //最低位置零
for (i = 0; i < 8; i ++)
{
if (addr & 0x01)
{
IO_SET;
}
else
{
IO_CLR;
}
SCK_SET;
SCK_CLR;
addr = addr >> 1;
}

//寫入數據：d
for (i = 0; i < 8; i ++)
{
if (d & 0x01)
{
IO_SET;
}
else
{
IO_CLR;
}
SCK_SET;
SCK_CLR;
d = d >> 1;
}
RST_CLR;//停止DS1302總線
}
/*------------------------------------------------
從DS1302讀出一字節數據
------------------------------------------------*/

unsigned char Ds1302_Read_Byte(unsigned char addr)
{

unsigned char i;
unsigned char temp;
RST_SET;

//寫入目標地址：addr
addr = addr | 0x01;//最低位置高
for (i = 0; i < 8; i ++)
{

if (addr & 0x01)
{
IO_SET;
}
else
{
IO_CLR;
}
SCK_SET;
SCK_CLR;
addr = addr >> 1;
}

//輸出數據：temp
for (i = 0; i < 8; i ++)
{
temp = temp >> 1;
if (IO_R)
{
temp |= 0x80;
}
else
{
temp &= 0x7F;
}
SCK_SET;
SCK_CLR;
}

RST_CLR;//停止DS1302總線
return temp;
}

/*------------------------------------------------
向DS1302寫入時鐘數據
------------------------------------------------*/
void Ds1302_Write_Time(void)
{

unsigned char i,tmp;
for(i=0;i<8;i++)
{ //BCD處理
tmp=time_buf1[i]/10;
time_buf[i]=time_buf1[i]%10;
time_buf[i]=time_buf[i]+tmp*16;
}
Ds1302_Write_Byte(ds1302_control_add,0x00);//關閉寫保護
Ds1302_Write_Byte(ds1302_sec_add,0x80);//暫停
//Ds1302_Write_Byte(ds1302_charger_add,0xa9);//涓流充電
Ds1302_Write_Byte(ds1302_year_add,time_buf[1]);//年
Ds1302_Write_Byte(ds1302_month_add,time_buf[2]);//月
Ds1302_Write_Byte(ds1302_date_add,time_buf[3]);//日
Ds1302_Write_Byte(ds1302_day_add,time_buf[7]);//周
Ds1302_Write_Byte(ds1302_hr_add,time_buf[4]);//時
Ds1302_Write_Byte(ds1302_min_add,time_buf[5]);//分
Ds1302_Write_Byte(ds1302_sec_add,time_buf[6]);//秒
Ds1302_Write_Byte(ds1302_day_add,time_buf[7]);//周
Ds1302_Write_Byte(ds1302_control_add,0x80);//打開寫保護
}

/*------------------------------------------------
從DS1302讀出時鐘數據
------------------------------------------------*/
void Ds1302_Read_Time(void)
{
unsigned char i,tmp;
time_buf[1]=Ds1302_Read_Byte(ds1302_year_add);//年
time_buf[2]=Ds1302_Read_Byte(ds1302_month_add);//月
time_buf[3]=(Ds1302_Read_Byte(ds1302_date_add)); //日
time_buf[4]=Ds1302_Read_Byte(ds1302_hr_add);//時
time_buf[5]=Ds1302_Read_Byte(ds1302_min_add);//分
time_buf[6]=(Ds1302_Read_Byte(ds1302_sec_add))&0x7F;//秒
time_buf[7]=Ds1302_Read_Byte(ds1302_day_add);//周

for(i=0;i<8;i++)
{ //BCD處理
tmp=time_buf[i]/16;
time_buf1[i]=time_buf[i]%16;
time_buf1[i]=time_buf1[i]+tmp*10;
}
}

/*------------------------------------------------
DS1302初始化
------------------------------------------------*/
void Ds1302_Init(void)
{

RST_CLR;//RST腳置低
SCK_CLR;//SCK腳置低
Ds1302_Write_Byte(ds1302_sec_add,0x00);
}

作者: 作業沒寫 時間: 2015-2-15 16:14
main函數在這
#include"stc15f2k60s2.h"
#include"ds1302.h"
#include"intrins.h"

#define uchar unsigned char
#define uint unsigned int

sbit Wr=P3^6;

#define rst573 P2&=0x1f//關閉選中
#define smgY6C P2|=0xc0 //位選
#define smgY7C P2|=0xe0 //段選
#define ledY4C P2|=0x80 //選中LED
#define beeY5C P2|=0xa0 //選中蜂鳴器+繼電器

sbit k0=P3^0;
sbit k1=P3^1;
sbit k2=P3^2;
sbit k3=P3^3;
//行線
sbit k4=P3^4;
sbit k5=P3^5;
sbit k6=P4^2;
sbit k7=P4^4;
uchar code duan[]={0xc0,0xf9,0xa4,0xb0,0x99,0x92,0x82,0xf8,0x80,0x90,0x88,0x83,0xc6,0xa1,0x86,0x8e,0xbf};
// 全滅+ 1~8wei
uchar code wei[]={0x00,0x01,0x02,0x04,0x08,0x10,0x20,0x40,0x80}; //位碼

uchar num=0,time;
void CHS_BEEP_close() //關閉蜂鳴器繼電器
{ Wr=0;
P2=0x5;
P06=1;
P04=0;
Wr=1;
}

void delay(uint z)//ms延時函數
{
uint x,y;
for(x=z;x>0;x--)
for(y=1100;y>0;y--);
}

void display(uchar adt1,uchar adt2,uchar adt3)
{

P0=0x00; //消影
delay(1);
Wr=0; //位選
smgY6C;
P0=wei[1];
P2=0x1f;

Wr=0;
smgY7C; //段選
P0=duan[adt1/10];
P2=0x1f;
Wr=1;

delay(1);
Wr=0; //位選
smgY6C;
P0=wei[2];
P2=0x1f;

Wr=0;
smgY7C; //段選
P0=duan[adt1%10];
P2=0x1f;
Wr=1;

delay(1);
Wr=0; //位選
smgY6C;
P0=wei[3];
P2=0x1f;

Wr=0;
smgY7C; //段選
P0=0xbf;
P2=0x1f;
Wr=1;

delay(1);
Wr=0; //位選
smgY6C;
P0=wei[4];
P2=0x1f;

Wr=0;
smgY7C; //段選
P0=duan[adt2/10];
P2=0x1f;
Wr=1;

delay(1);
Wr=0; //位選
smgY6C;
P0=wei[5];
P2=0x1f;

Wr=0;
smgY7C; //段選
P0=duan[adt2%10];
P2=0x1f;
Wr=1;

delay(1);
Wr=0; //位選
smgY6C;
P0=wei[6];
P2=0x1f;

Wr=0;
smgY7C; //段選
P0=0xbf;
P2=0x1f;
Wr=1;

delay(1);
Wr=0; //位選
smgY6C;
P0=wei[7];
P2=0x1f;

Wr=0;
smgY7C; //段選
P0=duan[adt3/10];
P2=0x1f;
Wr=1;

delay(1);
Wr=0; //位選
smgY6C;
P0=wei[8];
P2=0x1f;

Wr=0;
smgY7C; //段選
P0=duan[adt3%10];
P2=0x1f;
Wr=1;

}
void keyscan()
{
if(k0==0){delay(50);if(k0==0)num=0;while(!k0);}
if(k1==0){delay(50);if(k1==0)num=1;while(!k1);}
}
void init_time()
{
TMOD=0x00; //16位自動重裝定時器
TH0=0xec; //定時5MS
TL0=0x78;
ET0=1;
EA=1;
TR0=1;
}
void main()

{
init_time();
CHS_BEEP_close();
Ds1302_Init();
Ds1302_Write_Time();
Ds1302_Read_Time();
while(1)
{
keyscan();
if(num)display(time_buf1[1],time_buf1[2],time_buf1[3]);//顯示年月日
else display(time_buf1[4],time_buf1[5],time_buf1[6]);//顯示時分秒
}
}

void timer_0() interrupt 1
{
time++;
if(time==20) //定時讀數據
{
Ds1302_Read_Time();
time=0;
}

}

作者: 作業沒寫 時間: 2015-2-15 19:04
自頂一下

作者: 作業沒寫 時間: 2015-2-16 12:11
人工置頂

作者: zhuanzhuan666 時間: 2019-4-9 21:27
#include <REGX52.H> #include "LCD1602.h" #include "DS1302.h" void Delay1ms(unsigned int count) { unsigned int i,j; for(i=0;i<count;i++) for(j=0;j<120;j++); } main() { SYSTEMTIME CurrentTime; LCD_Initial(); Initial_DS1302(); GotoXY(0,0); Print(" tian ma dian zi"); GotoXY(0,1); Print("Time: "); while(1) { DS1302_GetTime(&CurrentTime); TimeToStr(&CurrentTime); GotoXY(6,1); Print(CurrentTime.TimeString); Delay1ms(400); } }

歡迎光臨 (http://www.torrancerestoration.com/bbs/)

<tbody id="eqc20"></tbody>