標題:
MSP430G2553ADC轉換程序
[打印本頁]
作者:
51黑小牛
時間:
2016-4-10 17:30
標題:
MSP430G2553ADC轉換程序
#include "msp430G2553.h"
long temp;
long intDegF;
long intDegC;
//***************初始化ADC****/
void ADC10_init(void)
{
ADC10CTL0 &=~ENC; //關閉轉換
ADC10CTL0 =ADC10IE + ADC10ON + REFON + ADC10SHT_3 + REF2_5V;
// ADC10IE 使能ADC轉換中斷，即開啟
// ADC10ON 使能ADC轉換
// REFON 打開內部參考電壓開關
// DC10SHT_3 時鐘及64倍頻選擇 0-4倍 1-8倍；2-16倍，3-64被
// SREF_1 參考電壓選擇，選內部可用REF2_5V ，內部2.5V ；REF1_5V ，內部1.5V
ADC10CTL1 =CONSEQ_0 + ADC10SSEL_0 + ADC10DIV_3 + SHS_0 + INCH_10;
// CONSEQ_0 ===0單通道轉換；1多通道倫流 2復合
// ADC10SSEL_1 時鐘選擇 0-ADC10OSC；1-ACLK；2-MCLK；3-SMCLK
// ADC10DIV_3 ADC時鐘
// SHS_0 ADC控制選擇
//INCH_10 模擬信號輸入通道選擇
__delay_cycles(30000);
ADC10CTL0 |= ENC; //開啟轉換
}
//************主函數***************************
void main()
{
WDTCTL = WDTPW + WDTHOLD; // Stop WDT
ADC10_init();
while(1)
{
ADC10CTL0 |=ENC +ADC10SC;
LPM0; //__bis_SR_register(CPUOFF + GIE);
temp =ADC10MEM; //Read Data
intDegC =((temp-673)*423)/1024;
__no_operation();
}
}
#pragma vector=ADC10_VECTOR
__interrupt void ADC10_A(void)
{
__bic_SR_register_on_exit(LPM4_bits);
}
歡迎光臨 (http://www.torrancerestoration.com/bbs/)
Powered by Discuz! X3.1