標題:
按下K2的時候，啟動定時T0，秒表一直再走，數碼管上顯示不出來跑表的過程，什么原因啊
[打印本頁]
作者:
lilining
時間:
2016-5-1 10:03
標題:
按下K2的時候，啟動定時T0，秒表一直再走，數碼管上顯示不出來跑表的過程，什么原因啊
#include "reg52.h"
#include<intrins.h>
#define uchar unsigned char
#define uint unsigned int
#define ulong unsigned long
#define N_key 0 //按鍵沒被按下
#define S_key 1 // 單擊
#define D_key 2 //雙擊
#define L_key 3 //長安
#define key_state_0 0
#define key_state_1 1
#define key_state_2 2
#define key_state_3 3
sbit key1 = P3^0;
sbit key2 = P3^2;
unsigned char time_10ms_ok = 0;
unsigned char key = 0;
//引腳定義:
歡迎光臨 (http://www.torrancerestoration.com/bbs/)
Powered by Discuz! X3.1