欧美日韩国产媒体在线观看,一本大道香蕉中文在线视频

#include <REG51.H>
#include "intrins.h"
#include "AT24C04.h"
#define uchar unsigned char
#define uint unsigned int
uchar code LED[10] = {0xc0,0xf9,0xa4,0xb0,0x99,0x92,0x82,0xf8,0x80,0x90};
uchar code Bit_sel[4] = {0x08,0x04,0x02,0x01 }; //各個數碼管對應的位選數據
sbit DIO = P1^0; //數據線
sbit CS = P1^1; //片選
sbit CLK = P1^2; //io口時鐘
sbit SCS = P1^4;
sbit SDATA = P1^5;
sbit SCLK = P1^3;
sbit ADD = P3^0;
sbit SUB = P3^1;
sbit Pre_read = P3^2;
sbit Store = P3^3;
uint qian,bai,shi,ge; //用于顯示數碼管的千，百，十，個等四位的顯示
uint val,num; //val 是用于輸入DA 的數據，num是用于判斷是不是長按的
uint cp; //計數的變量
uchar key_stat;
uchar add_stat,sub_stat;
uchar st_flag,pre_flag;
void delay(uint x) //微妙級是延時函數
{
while(x--)
_nop_();
}
/**********************************************
函數名稱：deal
函數作用：處理AD的返回值
函數參數：無
函數返回值：無
**********************************************/
void deal(uint num) //顯示程序
{
qian=num/1000; //千，百，十，個處理
bai=num/100%10;
shi=num/10%10;
ge=num%10;
}
/**********************************************
函數名稱：TL549_AD()
函數作用：返回AD的返回值
函數參數：無
函數返回值：data_ad
**********************************************/
uint TL549_AD() //TLC549處理
{
uchar i;
uint data_ad = 0;
CS = 1; //初始化，啟動
CLK = 0;
CS = 0;
_nop_();
for(i = 0;i < 8;i++) //讀取采集數據，讀取的是上一次采集數據
{
CLK = 1;
if(DIO)data_ad |= 0x01;
CLK = 0;
data_ad = data_ad << 1;
}
CS = 1;
data_ad = data_ad * (500/ 256);
return(data_ad);
}
/**********************************************
函數名稱：TLC5615_DA(uint da)
函數作用：TLC5615_DA 將da轉換后模擬輸出
函數參數：da
函數返回值：無
**********************************************/
void TLC5615_DA(uint da) // TLC5615 的DA 轉換函數
{
uchar i;
da<<=6;
SCS=0;
SCLK=0;
for (i=0;i<12;i++)
{
SDATA=(bit)(da&0x8000);
SCLK=1;
da<<=1;
SCLK=0;
}
SCS=1;
SCLK=0;
for (i=0;i<12;i++);
}
/**********************************************
函數名稱：key_scan()
函數作用：處理那些獨立鍵盤
函數參數：無
函數返回值：無
**********************************************/
void key_scan()
{
if (ADD == 0) // ADD 按鍵的鍵盤處理函數
{
delay(10);
if (ADD == 0)
{
add_stat = 1;
num ++;
}
else
{
add_stat = 0;
num = 0;
}
//此處判斷是不是長按，長按的話使其步進值加大
if (ADD == 0 && add_stat == 1 && num >= 300)
{
val += 5;
num = 0;
}
if (ADD == 1 && add_stat == 1)
{
val ++;
num = 0;
add_stat = 0;
}
if (val >= 1024)
{
val = 1023;
}
}
if (SUB == 0) //SUB 按鍵的鍵盤處理函數
{
delay(10);
if (SUB == 0)
{
sub_stat = 1;
num ++;
}
if (SUB == 0 && sub_stat == 1 && num >= 300)
{
val -= 5;
num = 0;
}
if (SUB == 1 && sub_stat == 1)
{
val --;
num = 0;
sub_stat = 0;
}
if (val <= 0)
val = 0;
}
if (Pre_read == 0) //預讀數據的鍵盤處理函數
{
delay(100);
if (Pre_read == 0)
{
pre_flag = 1;
}
if (Pre_read == 1 &&pre_flag == 1 )
{
pre_flag = 0;
val = read_24C04(20); //從AT24C04中的地址20 中讀出預存儲的數據
}
}
if (Store == 0) //保存數值按鍵的鍵盤處理函數
{
delay(100);
if (Store == 0)
{
st_flag = 1;
}
if (Store == 1 && st_flag == 1)
{
st_flag = 0;
write_24C04(20,val); //向AT24C04中的地址20 寫入存儲的數據
}
}
}
/**********************************************
函數名稱：timer0_init (void)
函數作用：初始化定時器0，并設置
函數參數：無
函數返回值：無
**********************************************/
void timer0_init (void) // timer0中斷初始化函數
{
EA = 0;
TMOD = 0x01;
TR0 = 0;
TL0 = (65536-5000)%256; //設置計數器初值
TH0 = (65536-5000)/256;
PT0 = 1;
ET0 = 1;
EA = 1;
TR0 = 1;
}
/**********************************************
函數名稱：main(void)
函數作用：main主函數入口
函數參數：無
函數返回值：無
**********************************************/
void main(void) //主程序
{
timer0_init(); //初始化定時器0
init_24C04(); //初始化AT24C04
while(1)
{
key_scan(); //調用鍵盤掃描函數
TLC5615_DA(val); //處理鍵盤發送過來的值
}
}
/**********************************************
函數名稱：timer0_isr(void) interrupt 1
函數作用：定時器0，方式1，的中斷服務子程序
函數參數：無
函數返回值：無
**********************************************/
void timer0_isr(void) interrupt 1 // timer0中斷服務函數
{
//數碼管的位選變量
TR0 = 0; //停止計數
TL0 = (65536-5000)%256; //重新載入計數器初值
TH0 = (65536-5000)/256;
cp++; //位循環變量加1
if(cp >= 4)
cp = 0;
deal(TL549_AD()); //循環顯示1次，j清零
TR0 = 1;
P0=0xff; //與j對應，P2輸出數碼管的位選信號
switch(cp)
{
case 0: P0 = LED[ge]; break;
case 1: P0 = LED[shi]; break;
case 2: P0 = LED[bai]&0x7f; break;
case 3: P0 = LED[qian]; break;
}
P2 = Bit_sel[cp];
}

復制代碼