国产精品福利网红五月天,手机在线观看AV无码片,日本又粗又黄jo视频图片

標題: 自制8x32點陣時鐘，帶誤差調整，可用麻將筒子顯示 [打印本頁]

作者: 老當益壯 時間: 2017-6-20 08:47
標題: 自制8x32點陣時鐘，帶誤差調整，可用麻將筒子顯示

程序是網上8x16點陣滾動時鐘修改而來，在此謝謝原創。
#include <REGX51.H> unsigned char sec=0,min=0,hou=12,st=0x00,timecount=0,oldP1=0xff,setting=0;
bit point=1,K1_old,K2_old;

unsigned char code dis_code[]=
{ 0x3E,0x41,0x41,0x3E,0x21,0x7F,0x01,0x00,//0與1
  0x23,0x45,0x49,0x31,0x22,0x41,0x49,0x36, //2與3
  0x1E,0x22,0x7F,0x02,0x72,0x51,0x51,0x4E, //4與5
  0x3E,0x49,0x49,0x26,0x60,0x40,0x4F,0x70,  //6與7
  0x36,0x49,0x49,0x36,0x32,0x49,0x49,0x3E,  //8與9
  0x3E,0x2A,0x3E,0x40,0x49,0xFE,0x40,0x00,       //時
  0x00,0x18,0x18,0x7E,0x7E,0x18,0x18,0x00,                //+
  0x3E,0x2A,0x3E,0x40,0x49,0xFE,0x40,0x00,       //時
  0x00,0x18,0x18,0x18,0x18,0x18,0x18,0x00,                      //-
  0x10,0x21,0x4A,0x0C,0x49,0x2F,0x20,0x00,       //分
  0x00,0x18,0x18,0x7E,0x7E,0x18,0x18,0x00,                //+
  0x10,0x21,0x4A,0x0C,0x49,0x2F,0x20,0x00,       //分
  0x00,0x18,0x18,0x18,0x18,0x18,0x18,0x00,                      //-
  0x32,0x49,0x49,0x26,0x00,0x40,0x7F,0x40,       //st
  0x00,0x18,0x18,0x7E,0x7E,0x18,0x18,0x00,                //+
  0x32,0x49,0x49,0x26,0x00,0x40,0x7F,0x40,       //st
  0x00,0x18,0x18,0x18,0x18,0x18,0x18,0x00,             //-
};
unsigned char code disp_code[]=
{ 0x7F,0x41,0x7F,0x00,0x00,0x08,0x00,0x00,
  0x00,0x41,0x00,0x00,0x01,0x08,0x40,0x00,
  0x41,0x00,0x41,0x00,0x41,0x08,0x41,0x00,
  0x45,0x00,0x45,0x00,0x15,0x20,0x45,0x00,
  0x55,0x00,0x55,0x00,0x49,0x49,0x49,0x00,
  0x3E,0x2A,0x3E,0x40,0x49,0xFE,0x40,0x00,       //時
  0x00,0x18,0x18,0x7E,0x7E,0x18,0x18,0x00,                //+
  0x3E,0x2A,0x3E,0x40,0x49,0xFE,0x40,0x00,       //時
  0x00,0x18,0x18,0x18,0x18,0x18,0x18,0x00,                      //-
  0x10,0x21,0x4A,0x0C,0x49,0x2F,0x20,0x00,       //分
  0x00,0x18,0x18,0x7E,0x7E,0x18,0x18,0x00,                //+
  0x10,0x21,0x4A,0x0C,0x49,0x2F,0x20,0x00,       //分
  0x00,0x18,0x18,0x18,0x18,0x18,0x18,0x00,                      //-
  0x32,0x49,0x49,0x26,0x00,0x40,0x7F,0x40,       //st
  0x00,0x18,0x18,0x7E,0x7E,0x18,0x18,0x00,                //+
  0x32,0x49,0x49,0x26,0x00,0x40,0x7F,0x40,       //st
  0x00,0x18,0x18,0x18,0x18,0x18,0x18,0x00,                      //-
};

sbit  K1=P1^7;
sbit  K2=P1^6;

void time50ms(void);
void delay_ms(void);
void timedeal(void);
/*******************************************************************/
void main(void)
{
      unsigned char num,disnum,x,y,offset=0,dis_p,scantimes=0;
      IE=0x82;    //允許定時器0工作
      TMOD=0x01; //timer0為模式1
      TR0=1;    //定時器0可以工作
      TH0 = 0x4c;
      TL0 = 0x00|(st);
      do
      {
            if(setting==0)       //正常顯示狀態
            {
                        for(x=0;x<16;x++)  //
                     {
                              dis_p=x;
                              if(dis_p==3|| dis_p==8|| dis_p==10|| dis_p==15||dis_p>15)       //空列
                              {
                                       y=0;
                              }
                              else if(dis_p<=2) //0~2為時的十位
                              {
                                       num=hou/10;
                                       if(num>0)
                                       y=dis_code[num*4+dis_p];
                                    else
                                    y=0;
                              }
                              else if(dis_p<=7) //4~7為時的個位
                              {
                                       num=hou%10;

                                       y=dis_code[num*4+dis_p-4];

                              }
                              else if(dis_p<=9)       //9為冒號的顯示位
                              {
                                 if(point)
                                       y=0x63;
                                       else
                                       y=0;
                              }
                              else if(dis_p<=14)       //11~14為分的十位
                              {
                                       num=min/10;
                                       y=dis_code[num*4+dis_p-11];
                              }
                              P3=0;
                              P1=x|0xE0;
                              P3=y;
                                 delay_ms();
                     }
                     for(x=0;x<16;x++)
                     {
                              dis_p=x;
                              if(dis_p==4 || dis_p==6||dis_p==11||dis_p==16||dis_p>16 )       //空列
                              {
                                       y=0;
                              }
                                 else if(dis_p<=3)                //0~3為分的個位
                              {
                                       num=min%10;
                                       y=dis_code[num*4+dis_p];
                              }
                              else if(dis_p<=5)       //5為冒號的顯示位
                              {
                                 if(point)
                                       y=0x63;
                                       else
                                       y=0;
                              }
                              else  if(dis_p<=10)       //7~10為秒的十位
                              {
                                    num=sec/10;
                                    y=dis_code[num*4+dis_p-7];
                              }
                              else if(dis_p<=15) //12~15為秒的個位
                              {
                                       num=sec%10;
                                       y=dis_code[num*4+dis_p-12];
                              }

                              P3=0;
                              P1=x|0xd0;
                              P3=y;
                                 delay_ms();             //刷新
                  }
            }


/**********************************************************************///以下麻將
            else if(setting==1)       //正常顯示狀態
               {
                     for(x=0;x<16;x++)  //
                     {
                              dis_p=x;
                              if(dis_p==3|| dis_p==8|| dis_p==10|| dis_p==15||dis_p>15)       //空列
                              {
                                       y=0;
                              }
                              else if(dis_p<=2) //0~2為時的十位
                              {
                                       num=hou/10;
                                       if(num>0)
                                       y=disp_code[num*4+dis_p];
                                    else
                                    y=0;
                              }
                              else if(dis_p<=7) //4~7為時的個位
                              {
                                       num=hou%10;

                                       y=disp_code[num*4+dis_p-4];

                              }
                              else if(dis_p<=9)       //9為冒號的顯示位
                              {
                                 if(point)
                                       y=0x63;
                                       else
                                       y=0;
                              }
                              else if(dis_p<=14)       //11~14為分的十位
                              {
                                       num=min/10;
                                       y=disp_code[num*4+dis_p-11];
                              }
                              P3=0;
                              P1=x|0xE0;
                              P3=y;
                                 delay_ms();
                     }
                     for(x=0;x<16;x++)
                     {
                              dis_p=x;
                              if(dis_p==4 || dis_p==6||dis_p==11||dis_p==16||dis_p>16 )       //空列
                              {
                                       y=0;
                              }
                                 else if(dis_p<=3)                //0~3為分的個位
                              {
                                       num=min%10;
                                       y=disp_code[num*4+dis_p];
                              }
                              else if(dis_p<=5)       //5為冒號的顯示位
                              {
                                 if(point)
                                       y=0x63;
                                       else
                                       y=0;
                              }
                              else  if(dis_p<=10)       //7~10為秒的十位
                              {
                                    num=sec/10;
                                    y=disp_code[num*4+dis_p-7];
                              }
                              else if(dis_p<=15) //12~15為秒的個位
                              {
                                       num=sec%10;
                                       y=disp_code[num*4+dis_p-12];
                              }

                              P3=0;
                              P1=x|0xd0;
                              P3=y;
                                 delay_ms();             //刷新
                  }

            }
/**************************************************///
            else       //當進入調整時間的狀態,運行下面的程序段
            {
                     for(x=0;x<16;x++)
                     {
                              if(setting==2)
                              if(x<16)                         //前16列顯示漢字+時
                              if(point)
                        y=dis_code[24+setting*8+x];
                              else
                              y=0;

                              if(setting==3)
                              if(x<16)                         //前16列顯示漢字-時
                              if(point)
                        y=dis_code[32+setting*8+x];
                              else
                              y=0;

                              if(setting==4)
                              if(x<16)                         //前16列顯示漢字+分
                              if(point)
                        y=dis_code[40+setting*8+x];
                              else
                              y=0;

                              if(setting==5)
                              if(x<16)                         //前16列顯示漢字-分
                              if(point)
                        y=dis_code[48+setting*8+x];
                              else
                              y=0;

                        if(setting==6)
                              if(x<16)                         //前16列顯示漢字+st
                              if(point)
                        y=dis_code[56+setting*8+x];
                              else
                              y=0;

                              if(setting==7)
                              if(x<16)                         //前16列顯示漢字-st
                              if(point)
                        y=dis_code[64+setting*8+x];
                              else
                              y=0;

                              P3=0;
                                 P1=x|0xe0;             //刷新
                                 P3=y;
                                 delay_ms();
                        }

                  for(x=0;x<16;x++)
                     {
                              if(setting==2||setting==3)
                              {
                                    dis_p=x;
                                       if(dis_p<=7 )
                                    {
                                             y=0;
                                    }
                                       else if(x<12)  //8~11為十位
                                       {
                                             disnum=hou;
                                             num=disnum/10;
                                             y=dis_code[num*4+x-8];
                                    }
                                       else                                  //12~15為個位
                                       {
                                                num=disnum%10;
                                                y=dis_code[num*4+x-12];
                                       }
                                 }

                              if(setting==4||setting==5)
                              {
                                    dis_p=x;
                                       if(dis_p<=7 )
                                    {
                                             y=0;
                                    }
                                       else if(x<12)  //8~11為十位
                                    {
                                             disnum=min;
                                             num=disnum/10;
                                             y=dis_code[num*4+x-8];
                                    }
                                       else                         //12~15為個位
                                       {
                                                num=disnum%10;
                                                y=dis_code[num*4+x-12];
                                    }
                              }

                              if(setting==6||setting==7)
                              {
                                    dis_p=x;
                                       if(dis_p<=7 )
                                    {
                                             y=0;
                                    }
                                 else if(x<12)  //8~11為十位
                                    {
                                             disnum=st;
                                             num=disnum/10;
                                             y=dis_code[num*4+x-8];
                                    }
                                       else
                                       {                            //12~15為個位
                                                num=disnum%10;
                                                y=dis_code[num*4+x-12];
                                    }
                        }
                              P3=0;
                                 P1=x|0xd0;
                                 P3=y;
                                 delay_ms();
                     }
            }
      }
      while(1);
}
/***************************************************/
void delay_ms(void)          //顯示刷新
{
      unsigned char i,j;
      for(i=0;i<4;i++)
      for(j=0;j<30;j++);
}
/****************************************************/
void time50ms(void) interrupt 1
{
         TH0 = 0x4c;
      TL0 = 0x00|(st);
      timecount++;
      if(timecount==10)
      {
            timecount=0;
               point=!point;
               if(point)
               {
                        sec++;
                        timedeal();
               }
      }
if(!K1&&K1!=K1_old)//按下模式鍵
      {
            setting++;
            if(setting==8)
            setting=0;
      }
      if(!K2 && K2!=K2_old) //按下置位鍵
      {
            if(setting==2)
            {
                     hou++;
                     sec=0;
                     timedeal();
            }
            else if(setting==3)
            {
                     if(hou==0)
                     hou=12;
                     hou--;
                     timedeal();
            }
            else if(setting==4)
            {
                     min++;
                     sec=0;
                     timedeal();
            }
            else if(setting==5)
            {
                     if(min==0)
                     min=60;
                     min--;
                     sec=0;
                     timedeal();
            }
            else if(setting==6)
            {
                     st++;
                     if(st==100)
                     st=0;
               }
            else if(setting==7)
            {
                     st--;
                     if(st==0-1)
                     st=99;
            }
      }
      K1_old=K1;
      K2_old=K2;
}
/****************************************************/
void timedeal(void)
{
      if(sec>=60)
      {
               sec=0;
               min++;
      }
      if(min>=60)
         {
            min=0;
            hou++;
      }
      if(hou>12)
      hou=1;
}

作者: admin 時間: 2017-6-20 15:54
好資料，51黑有你更精彩!!!

作者: qyh600 時間: 2018-12-9 23:20
先看看

作者: zhlip 時間: 2018-12-13 22:06
學習學習了

作者: dtlqyyl 時間: 2020-1-2 17:46
不錯，研究一下

作者: 神射手234 時間: 2022-10-11 10:43
太棒了，收藏了

歡迎光臨 (http://www.torrancerestoration.com/bbs/)