97视频在线观看这里只有精品,A欧美亚洲日韩在线观看,国产多人群P刺激交换视频

//--------------------------------------------------------
// 項目:搖搖棒
// 模塊:主程序
// 說明:
// 設計:張俊(版權所有,引用者請保留原作者姓名)
//--------------------------------------------------------
/*
版本說明:
2006-08-07 v01.01
測試版本
ACLK = TACLK = 32768Hz, MCLK = SMCLK = default DCO
每2S中斷一次,對P1.0~P1.6口輸出取反
2006-08-07 v01.02
測試版本
改變計時器計數模式
2006-08-08 v01.03
測試版本
2006-08-11 v01.04
測試版本
已經可以顯示時間了,并且時間也可以運行了
但是時間還不可調節
2006-08-12 v01.05
增加按鍵和蜂鳴器功能(按鍵與LED口復用IO口)
2006-08-14 v01.06
增加工作模式,不同模式下顯示和按鍵內容不同
2006-08-16 v01.07
修改部分BUG
2006-08-20 v01.08
1.完成整點報時功能,每次整點鳴叫2聲
2.取消分鐘提示功能(因?yàn)槌绦蚩臻g不夠了)
3.完善秒表功能
4.增加一個延時自動退出功能,60秒內未按鍵,也未觸發慣性開關,則返回模式0
5.當無鍵計時>60秒,則禁止按鍵喚醒,必須通過慣性開關喚醒
經過這樣改動后,待機電流由16UA下降到了6UA.
*/
//--------------------------------------------------------
//插入文件包
//--------------------------------------------------------
#include
//--------------------------------------------------------
//--------------------------------------------------------
//重新命名數據類型
//--------------------------------------------------------
typedef unsigned char tU08; //unsigned 8 bit definition
typedef unsigned char tU8; //unsigned 8 bit definition
typedef unsigned int tU16; //unsigned 16 bit definition
typedef unsigned long tU32; //unsigned 32 bit definition
typedef signed char tS08; //signed 8 bit definition
typedef signed char tS8; //signed 8 bit definition
typedef signed int tS16; //signed 16 bit definition
typedef signed long tS32; //signed 32 bit definition
typedef float tF32;
typedef double tF64;
//--------------------------------------------------------
//顯示段碼表(A類代碼)
//--------------------------------------------------------
const tU08 LCD_TAB_A[]=
{ //編號字符
0x3E, 0x41, 0x41, 0x41, 0x3E, //0 0
0x00, 0x42, 0x7F, 0x40, 0x00, //1 1
0x42, 0x61, 0x51, 0x49, 0x46, //2 2
0x21, 0x41, 0x45, 0x4B, 0x31, //3 3
0x18, 0x14, 0x12, 0x7F, 0x10, //4 4
0x27, 0x45, 0x45, 0x45, 0x39, //5 5
0x3C, 0x4A, 0x49, 0x49, 0x30, //6 6
0x01, 0x01, 0x71, 0x0D, 0x03, //7 7
0x36, 0x49, 0x49, 0x49, 0x36, //8 8
0x06, 0x49, 0x49, 0x29, 0x1E, //9 9
0x7C, 0x12, 0x11, 0x12, 0x7C, //10 A
0x7F, 0x49, 0x49, 0x49, 0x36, //11 B
0x3E, 0x41, 0x41, 0x41, 0x22, //12 C
0x7F, 0x41, 0x41, 0x22, 0x1C, //13 D
0x7F, 0x49, 0x49, 0x49, 0x41, //14 E
0x7F, 0x09, 0x09, 0x09, 0x01, //15 F
0x3E, 0x41, 0x49, 0x49, 0x3A, //16 G
0x7F, 0x08, 0x08, 0x08, 0x7F, //17 H
0x00, 0x41, 0x7F, 0x41, 0x00, //18 I
0x00, 0x21, 0x41, 0x3F, 0x01, //19 J
0x7F, 0x08, 0x14, 0x22, 0x41, //20 K
0x7F, 0x40, 0x40, 0x40, 0x40, //21 L
0x7F, 0x02, 0x0C, 0x02, 0x7F, //22 M
0x7F, 0x04, 0x08, 0x10, 0x7F, //23 N
0x3E, 0x41, 0x41, 0x41, 0x3E, //24 O
0x7F, 0x09, 0x09, 0x09, 0x06, //25 P
0x3E, 0x41, 0x51, 0x21, 0x5E, //26 Q
0x7F, 0x09, 0x19, 0x29, 0x46, //27 R
0x26, 0x49, 0x49, 0x49, 0x32, //28 S
0x01, 0x01, 0x7F, 0x01, 0x01, //29 T
0x3F, 0x40, 0x40, 0x40, 0x3F, //30 U
0x1F, 0x20, 0x40, 0x20, 0x1F, //31 V
0x3F, 0x40, 0x30, 0x40, 0x3F, //32 W
0x63, 0x14, 0x08, 0x14, 0x63, //33 X
0x03, 0x04, 0x78, 0x04, 0x03, //34 Y
0x61, 0x51, 0x49, 0x45, 0x43, //35 Z
0x00, 0x00, 0x00, 0x00, 0x00, //36 空格
0x7F, 0x7F, 0x7F, 0x7F, 0x7F, //37 全亮▉
0x00, 0x00, 0x36, 0x00, 0x00, //38 冒號:
0x00, 0x08, 0x1C, 0x08, 0x00, //39 點.
0x08, 0x08, 0x08, 0x08, 0x08 //40 中劃線-
//0x01, 0x3C, 0x42, 0x42, 0x24, //39 攝氏度符號C
//0x40, 0x40, 0x40, 0x40, 0x40, //40 下劃線_
//0x08, 0x08, 0x3E, 0x08, 0x08, //41 加號+
//0x22, 0x14, 0x08, 0x14, 0x22, //43 乘號*
//0x08, 0x08, 0x2A, 0x08, 0x08, //44 除號/
//0x14, 0x14, 0x14, 0x14, 0x14, //45 等號=
};
//顯緩區
#define disp_queue_sum 8 //待顯示字符串隊列長度
tU08 disp_queue[disp_queue_sum]; //待顯示字符串隊列
//時間系統
//tU08 TIME_Y; //當前時間"年"(00~99)
//tU08 TIME_MO; //當前時間"月"(1~12)
//tU08 TIME_D; //當前時間"日"(1~31)
//tU08 TIME_W; //當前時間"星期幾"(1~7)
tU08 TIME_H; //當前時間"時"(0~23)
tU08 TIME_M; //當前時間"分"(0~59)
tU08 TIME_S; //當前時間"秒"(0~59)
//無鍵計時器
tU08 NOKEY_JSQ; //無鍵計時器(每秒+1)
//秒表系統
tU08 RUN_H; //秒表時間"時"(0~99)
tU08 RUN_M; //秒表時間"分"(0~59)
tU08 RUN_S; //秒表時間"秒"(0~59)
tU08 RUN_MD; //秒表狀態(0=停止,1=運行)
//定時系統
tU08 TIMER_H; //定時時間"時"(0~23)
tU08 TIMER_M; //定時時間"分"(0~59)
tU08 SP_M; //蜂鳴器鳴叫時間設置值(0~99分)(說明:0=定時關閉)
tU08 SP_RUN; //蜂鳴器鳴叫時間運行值(0~99分)(說明:0=定時關閉)
//工作模式
tU08 WK_MODE; //工作模式
//溫度系統
//tU08 TEMP; //當前溫度
//附加功能
tU08 FUN_ZDBS; //整點報時(0=禁止,1=使能)
//tU08 FUN_FZTS; //分鐘提示(0=禁止,1=使能)
/*
//--------------------------------------------------------
//延時程序
//--------------------------------------------------------
void delay()
{
unsigned short i;
for(i=500; i>0; i--)
{
asm ("nop");
}
}
*/
//--------------------------------------------------------
//延時若干時間
//入口: 延時時間=i*基本時間
//--------------------------------------------------------
void delay_n(tU16 i)
{
for ( ; i!=0 ; i-- )
{
asm ("nop");
}
}
/*
//--------------------------------------------------------
//顯示當前時間年
//--------------------------------------------------------
void display_TIME_Y()
{
disp_queue[0] = TIME_Y / 10; //年
disp_queue[1] = TIME_Y % 10;
}
//--------------------------------------------------------
//顯示當前時間月
//--------------------------------------------------------
void display_TIME_MO()
{
disp_queue[3] = TIME_MO / 10; //月
disp_queue[4] = TIME_MO % 10;
}
//--------------------------------------------------------
//顯示當前時間日
//--------------------------------------------------------
void display_TIME_D()
{
disp_queue[6] = TIME_D / 10; //日
disp_queue[7] = TIME_D % 10;
}
*/
//--------------------------------------------------------
//顯示當前時間時
//--------------------------------------------------------
void display_TIME_H()
{
disp_queue[0] = TIME_H / 10; //時
disp_queue[1] = TIME_H % 10;
}
//--------------------------------------------------------
//顯示當前時間分
//--------------------------------------------------------
void display_TIME_M()
{
disp_queue[3] = TIME_M / 10; //分
disp_queue[4] = TIME_M % 10;
}
//--------------------------------------------------------
//顯示當前時間秒
//--------------------------------------------------------
void display_TIME_S()
{
disp_queue[6] = TIME_S / 10; //秒
disp_queue[7] = TIME_S % 10;
}
//--------------------------------------------------------
//顯示鬧鐘TM
//--------------------------------------------------------
void display_TM()
{
disp_queue[0] = 29; //"T"
disp_queue[1] = 22; //"M"
}
//--------------------------------------------------------
//顯示鬧鐘時
//--------------------------------------------------------
void display_TIMER_H()
{
disp_queue[3] = TIMER_H / 10; //時
disp_queue[4] = TIMER_H % 10;
}
//--------------------------------------------------------
//顯示鬧鐘分
//--------------------------------------------------------
void display_TIMER_M()
{
disp_queue[6] = TIMER_M / 10; //分
disp_queue[7] = TIMER_M % 10;
}
//--------------------------------------------------------
//顯示鬧鐘"▉▉"
//--------------------------------------------------------
void display_ALL1()
{
disp_queue[0] = 37; //"▉"
disp_queue[1] = 37; //"▉"
}
//--------------------------------------------------------
//顯示鬧鐘"▉▉"
//--------------------------------------------------------
void display_ALL2()
{
disp_queue[3] = 37; //"▉"
disp_queue[4] = 37; //"▉"
}
//--------------------------------------------------------
//顯示鬧鐘"▉▉"
//--------------------------------------------------------
void display_ALL3()
{
disp_queue[6] = 37; //"▉"
disp_queue[7] = 37; //"▉"
}
//--------------------------------------------------------
//顯示分隔符號": :"
//--------------------------------------------------------
void display_COL()
{
disp_queue[2] = 38; //":"
disp_queue[5] = 38; //":"
}
//--------------------------------------------------------
//顯示分隔符號"- -"
//--------------------------------------------------------
void display_LINE()
{
disp_queue[2] = 40; //"-"
disp_queue[5] = 40; //"-"
}
//--------------------------------------------------------
//顯示"SET -O"
//--------------------------------------------------------
void display_SET()
{
disp_queue[0] = 28; //"S"
disp_queue[1] = 14; //"E"
disp_queue[2] = 29; //"T"
disp_queue[4] = 40; //"-"
disp_queue[5] = 24; //"O"
}
//--------------------------------------------------------
//刷新待顯示字符串
//出口: disp_queue[]=待顯示字符串隊列
//--------------------------------------------------------
void new_display()
{
//====根據工作模式判斷
switch( WK_MODE ) //根據工作模式判斷
{
//case 0: //顯示當前時間
// display_TIME_H(); //時
// display_TIME_M(); //分
// display_TIME_S(); //秒
// display_COL(); //": :"
// break;
/*
case 1: //顯示當前日期
display_TIME_Y(); //年
display_TIME_MO(); //月
display_TIME_D(); //日
display_LINE(); //"- -"
break;
case 2: //顯示星期幾
disp_queue[0] = 36; //" "
disp_queue[1] = 32; //"W"
disp_queue[2] = 14; //"E"
disp_queue[3] = 14; //"E"
disp_queue[4] = 20; //"K"
disp_queue[5] = 36; //" "
disp_queue[6] = TIME_W % 10; //星期幾
disp_queue[7] = 36; //" "
break;
case 3: //顯示溫度
disp_queue[0] = 29; //"T"
disp_queue[1] = 14; //"E"
disp_queue[2] = 22; //"M"
disp_queue[3] = 25; //"P"
disp_queue[4] = 36; //" "
disp_queue[5] = TEMP / 10; //當前溫度
disp_queue[6] = TEMP % 10;
disp_queue[7] = 39; //"攝氏度符號C"
break;
*/
case 4: //顯示鬧鐘時間
display_TM(); //"TM"
disp_queue[2] = 36; //" "
display_TIMER_H(); //"定時時間"時""
disp_queue[5] = 38; //":"
display_TIMER_M(); //定時時間"分"
break;
case 5: //顯示秒表時間
disp_queue[0] = RUN_H / 10; //時
disp_queue[1] = RUN_H % 10;
disp_queue[2] = 39; //"."
disp_queue[3] = RUN_M / 10; //分
disp_queue[4] = RUN_M % 10;
disp_queue[5] = 39; //"."
disp_queue[6] = RUN_S / 10; //秒
disp_queue[7] = RUN_S % 10;
break;
case 6: //顯示作者信息"zhangjun"
disp_queue[0] = 35; //"Z"
disp_queue[1] = 17; //"H"
disp_queue[2] = 10; //"A"
disp_queue[3] = 23; //"N"
disp_queue[4] = 16; //"G"
disp_queue[5] = 19; //"J"
disp_queue[6] = 30; //"U"
disp_queue[7] = 23; //"N"
break;
case 7: //顯示當前時間"時"
display_TIME_H(); //時
display_ALL2(); //"▉▉"
display_ALL3(); //"▉▉"
display_COL(); //": :"
break;
case 8: //顯示當前時間"分""秒"
display_ALL1(); //"▉▉"
display_TIME_M(); //分
display_TIME_S(); //秒
display_COL(); //": :"
break;
/*
case 9: //顯示當前時間"年"
display_TIME_Y(); //年
display_ALL2(); //"▉▉"
display_ALL3(); //"▉▉"
display_LINE(); //"- -"
break;
case 10: //顯示當前時間"月"
display_ALL1(); //"▉▉"
display_TIME_MO(); //月
display_ALL3(); //"▉▉"
display_LINE(); //"- -"
break;
case 11: //顯示當前時間"日"
display_ALL1(); //"▉▉"
display_ALL2(); //"▉▉"
display_TIME_D(); //日
display_LINE(); //"- -"
break;
*/
case 12: //顯示定時時間"時"
display_TM(); //"TM"
disp_queue[2] = 36; //" "
display_TIMER_H(); //"定時時間"時""
disp_queue[5] = 38; //":"
display_ALL3(); //"▉▉"
break;
case 13: //顯示定時時間"分"
display_TM(); //"TM"
disp_queue[2] = 36; //" "
display_ALL2(); //"▉▉"
disp_queue[5] = 38; //":"
display_TIMER_M(); //定時時間"分"
break;
case 14: //顯示蜂鳴器鳴叫時間
display_TM(); //"TM"
disp_queue[2] = 36; //" "
disp_queue[3] = 28; //"S"
disp_queue[4] = 25; //"P"
disp_queue[5] = 38; //":"
disp_queue[6] = SP_M / 10; //蜂鳴器鳴叫時間
disp_queue[7] = SP_M % 10;
break;
case 15: //顯示整點報時功能
display_SET(); //"SET -O"
disp_queue[3] = 1; //"1"
if ( FUN_ZDBS != 0 )
{
disp_queue[6] = 23; //"N"
disp_queue[7] = 36; //" "
}
else
{
disp_queue[6] = 15; //"F"
disp_queue[7] = 15; //"F"
}
break;
/*
case 16: //顯示分鐘提示功能
display_SET(); //"SET -O"
disp_queue[3] = 2; //"2"
if ( FUN_FZTS != 0 )
{
disp_queue[6] = 23; //"N"
disp_queue[7] = 36; //" "
}
else
{
disp_queue[6] = 15; //"F"
disp_queue[7] = 15; //"F"
}
break;
*/
default: //以上條件都不滿足時,顯示當前時間
display_TIME_H(); //時
display_TIME_M(); //分
display_TIME_S(); //秒
display_COL(); //": :"
break;
}
}
//--------------------------------------------------------
//顯示掃描程序
//入口: disp_queue[]=待顯示字符串隊列
//--------------------------------------------------------
void display_cnt()
{
tU08 i;
tU08 j;
//====延時等待
P1OUT &= 0x80; //清除顯示
delay_n(15000);
//====掃描顯示隊列中的字符
for (i=0; i {
//====顯示當前字符
for (j=0; j<5; j++) //j=列號(0~4)
{
P1OUT |= LCD_TAB_A[ disp_queue[i] * 5 + j ]; //送顯當前字符的當前列
delay_n(150); //列顯示延時
P1OUT &= 0x80; //清除顯示
delay_n(10); //列間隔延時
}
//====字符間隔延時
delay_n(250);
}
}
//--------------------------------------------------------
//IO初始化程序(復用口配置給key)
//--------------------------------------------------------
void IO_init_key()
{
if (NOKEY_JSQ >= 60) //當無鍵計時>60秒,則禁止按鍵喚醒,必須通過慣性開關喚醒
{
P1OUT = 0x10; //P1口輸出狀態
P1DIR = 0xEF; //P1口IO狀態(0=輸入,1=輸出)
//P1REN = 0x00; //P1口上拉使能(0=禁止,1=使能)
P1IE |= 0x10; // P14 中斷使能
}
else
{
P1OUT = 0x70; //P1口輸出狀態
P1DIR = 0x8F; //P1口IO狀態(0=輸入,1=輸出)
//P1REN = 0x00; //P1口上拉使能(0=禁止,1=使能)
P1IE |= 0x70; // P16~P14 中斷使能
}
P1IES |= 0x00; // P1口觸發邊沿選擇 (0=上升沿有效,1=下降沿有效)
P1IFG = 0x00; // IFG cleared
}
//--------------------------------------------------------
//IO初始化程序(復用口配置給led)
//--------------------------------------------------------
void IO_init_led()
{
P1OUT = 0x00; //P1口輸出狀態
P1DIR = 0xFF; //P1口IO狀態(0=輸入,1=輸出)
//P1REN = 0x00; //P1口上拉使能(0=禁止,1=使能)
//P1IE |= 0x00; // P16~P14 中斷禁止
//P1IES |= 0x00; // P1口觸發邊沿選擇 (0=上升沿有效,1=下降沿有效)
//P1IFG = 0x00; // IFG cleared
}
//--------------------------------------------------------
//參數初始化程序
//--------------------------------------------------------
void parameter_init()
{
//TIME_Y = 6; //當前時間"年"(00~99)
//TIME_MO =1; //當前時間"月"(1~12)
//TIME_D =1; //當前時間"日"(1~31)
TIME_H =12; //當前時間"時"(0~23)
TIME_M = 0; //當前時間"分"(0~59)
TIME_S = 0; //當前時間"秒"(0~119)
RUN_H = 0; //秒表時間"時"(0~23)
RUN_M = 0; //秒表時間"分"(0~59)
RUN_S = 0; //秒表時間"秒"(0~119)
RUN_MD = 0; //秒表狀態(0=停止,1=運行)
TIMER_H = 7; //定時時間"時"(0~23)
TIMER_M = 15; //定時時間"分"(0~59)
SP_M = 10; //蜂鳴器鳴叫時間設置值(0~99分)(說明:0=定時關閉)
//SP_RUN = 0; //蜂鳴器鳴叫時間運行值
WK_MODE = 0; //工作模式
FUN_ZDBS = 1; //整點報時(0=禁止,1=使能)
//FUN_FZTS = 0; //分鐘提示(0=禁止,1=使能)
}
//--------------------------------------------------------
//初始化程序
//--------------------------------------------------------
void init()
{
WDTCTL = WDTPW + WDTHOLD; //停止WDT
IO_init_key(); //IO初始化程序(復用口配置給key)
parameter_init(); //參數初始化程序
//定時器中斷設置
CCTL0 = CCIE; //CCR0 中斷使能
CCR0 = 32768-1; //定時器計數上限
TACTL = TASSEL_1 + MC_1; //ACLK, contmode
//定時器A時鐘源選擇: 1 - ACLK
//定時器A計數模式: 1 - Up to CCR0
}
//--------------------------------------------------------
//主程序
//--------------------------------------------------------
void main(void)
{
init(); //====初始化
_BIS_SR(LPM3_bits + GIE); //Enter LPM3 w/ interrupt
/*
//====循環主體
while (1) // Loop
{
//asm ( "nop" ) ;
if (0x80 & P1IN) //如果P1.7=1
{
P1OUT &= 0x80; //清除顯示
}
else //否則
{
new_display(); //刷新待顯示字符串
display_cnt(); //顯示掃描程序
}
}
*/
}
//--------------------------------------------------------
//蜂鳴器控制程序
//--------------------------------------------------------
void SP_CNT()
{
P1OUT |= 0x80; //開蜂鳴器
delay_n(20000); //鳴叫延時
P1OUT &= 0x7F; //關蜂鳴器
}
//--------------------------------------------------------
//Timer_A3 Interrupt Vector (TAIV) handler
//Timer_A3 中斷服務程序
//說明: 根據TAIV寄存器判斷,執行不同的中斷響應
//中斷頻率=32768/(32768) = 1Hz
//--------------------------------------------------------
// Timer A0 interrupt service routine
#pragma vector=TIMERA0_VECTOR
__interrupt void Timer_A (void)
{
//時鐘系統計時
TIME_S ++;
if ( TIME_S > 59 )
{
TIME_S = 0 ;
//蜂鳴器鳴叫時間運行值!=0時,運行值-1
if ( SP_RUN !=0 )
{
SP_RUN--;
}
TIME_M ++ ;
if ( TIME_M > 59 )
{
TIME_M = 0 ;
if ( FUN_ZDBS != 0 ) //整點報時功能
{
//SP_RUN = SP_RUN + 1; //鳴叫一分鐘
SP_CNT(); //鳴叫一聲
delay_n(60000); //鳴叫延時
SP_CNT(); //鳴叫一聲
}
TIME_H ++ ;
if ( TIME_H > 23 )
{
TIME_H = 0 ;
/*
TIME_D ++ ;
if ( TIME_D > 31)
{
TIME_D = 1 ;
TIME_MO ++ ;
if ( TIME_MO > 12 )
{
TIME_MO = 1 ;
TIME_Y ++ ;
if ( TIME_Y > 99 )
{
TIME_Y = 0 ;
}
}
}
*/
}
}
}
//當當前時間=定時時間時,開始鳴叫
if (( TIME_H == TIMER_H ) && (TIME_M == TIMER_M) && ( TIME_S < 10))
{
SP_RUN = SP_M;
}
//蜂鳴器鳴叫時間運行值!=0時,鳴叫
if ( SP_RUN != 0 )
{
SP_CNT(); //鳴叫一聲
//delay_n(40000); //鳴叫延時
//SP_CNT(); //鳴叫一聲
}
//秒表系統計時
if (RUN_MD != 0 )
{
RUN_S ++;
if ( RUN_S > 59 )
{
RUN_S = 0 ;
RUN_M ++ ;
if ( RUN_M > 59 )
{
RUN_M = 0 ;
RUN_H ++ ;
if ( RUN_H > 99 )
{
RUN_H = 0 ;
}
}
}
}
//無鍵計時
if (NOKEY_JSQ >= 60) //當無鍵計時>60秒,則執行
{
WK_MODE = 0 ; //切換工作模式
}
else
{
NOKEY_JSQ ++ ; //無鍵計時器(每秒+1)
}
//
IO_init_key(); //IO初始化程序(復用口配置給key)
}
//--------------------------------------------------------
//位置信號處理功能
//--------------------------------------------------------
void wz_fun()
{
SP_RUN = 0; //蜂鳴器鳴叫時間運行值=0,取消鳴叫
NOKEY_JSQ = 0 ; //無鍵計時器=0
IO_init_led(); //IO初始化程序(復用口配置給led)
new_display(); //刷新待顯示字符串
display_cnt(); //顯示掃描程序
}
//--------------------------------------------------------
//按鍵A信號處理功能
//--------------------------------------------------------
void key_a_fun()
{
SP_CNT(); //鳴叫一聲
NOKEY_JSQ = 0 ; //無鍵計時器=0
//====根據工作模式判斷
switch( WK_MODE ) //根據工作模式判斷
{
case 0: //顯示當前時間
WK_MODE = 4 ; //切換工作模式
break;
/*
case 1: //顯示當前日期
WK_MODE = 2 ; //切換工作模式
break;
case 2: //顯示星期幾
WK_MODE = 3 ; //切換工作模式
break;
case 3: //顯示溫度
WK_MODE = 4 ; //切換工作模式
break;
case 4: //顯示鬧鐘時間
RUN_S = 0 ; //秒表時間"秒"(0~59)
RUN_M = 0 ; //秒表時間"分"(0~59)
RUN_H = 0 ; //秒表時間"時"(0~23)
WK_MODE = 5 ; //切換工作模式
break;
case 5: //顯示秒表時間
WK_MODE = 6 ; //切換工作模式
break;
*/
case 6: //顯示作者信息
WK_MODE = 0 ; //切換工作模式
break;
case 7: //顯示當前時間"時"
if ( TIME_H < 23 ) //時+1(0~23)
{
TIME_H ++ ;
}
else
{
TIME_H = 0 ;
}
break;
case 8: //顯示當前時間"分""秒"
TIME_S = 0; //秒=0
if ( TIME_M < 59 ) //分+1(0~59)
{
TIME_M ++ ;
}
else
{
TIME_M = 0 ;
}
break;
/*
case 9: //顯示當前時間"年"
if ( TIME_Y < 99 ) //年+1(0~99)
{
TIME_Y ++ ;
}
else
{
TIME_Y = 0 ;
}
break;
case 10: //顯示當前時間"月"
if ( TIME_MO < 12 ) //月+1(1~12)
{
TIME_MO ++ ;
}
else
{
TIME_MO = 1 ;
}
break;
case 11: //顯示當前時間"日"
if ( TIME_D < 31 ) //日+1(1~31)
{
TIME_D ++ ;
}
else
{
TIME_D = 1 ;
}
break;
*/
case 12: //顯示定時時間"時"
if ( TIMER_H < 23 ) //時+1(0~23)
{
TIMER_H ++ ;
}
else
{
TIMER_H = 0 ;
}
break;
case 13: //顯示定時時間"分"
if ( TIMER_M < 59 ) //分+1(0~59)
{
TIMER_M ++ ;
}
else
{
TIMER_M = 0 ;
}
break;
case 14: //顯示蜂鳴器鳴叫時間
if ( SP_M < 99 ) //蜂鳴器鳴叫時間+1(0~59)
{
SP_M ++ ;
}
else
{
SP_M = 0 ;
}
break;
case 15: //顯示整點報時功能
FUN_ZDBS ^= 0x01; //整點報時功能取反
FUN_ZDBS &= 0X01;
break;
/*
case 16: //顯示分鐘提示功能
FUN_FZTS ^= 0x01; //分鐘提示功能取反
FUN_FZTS &= 0X01;
break;
*/
default: //以上條件都不滿足時,顯示當前時間
WK_MODE ++ ; //切換工作模式
break;
}
}
//--------------------------------------------------------
//按鍵B信號處理功能
//--------------------------------------------------------
void key_b_fun()
{
SP_CNT(); //鳴叫一聲
NOKEY_JSQ = 0 ; //無鍵計時器=0
//====根據工作模式判斷
switch( WK_MODE ) //根據工作模式判斷
{
case 0: //顯示當前時間
WK_MODE = 7 ; //切換工作模式
break;
/*
case 1: //顯示當前日期
WK_MODE = 9 ; //切換工作模式
break;
case 2: //顯示星期幾
break;
case 3: //顯示溫度
TEMP ++ ; //當前溫度+1
break;
*/
case 4: //顯示鬧鐘時間
WK_MODE = 12 ; //切換工作模式
break;
……………………
…………限于本文篇幅余下代碼請從51黑下載附件…………

復制代碼