想要數碼管從0到f切換，但是沒成功

ID:304233 · 發表于 2018-4-14 20:59

AT89C52.pdf (596.3 KB, 下載次數: 6)

原理圖QX-mini51.pdf (154.08 KB, 下載次數: 5)

程序①：
#include<reg52.h>
#define uint unsigned int
#define uchar unsigned char
sbit P2_0 = P2^0;
sbit P2_1 = P2^1;
sbit P2_2 = P2^2;
sbit P2_3 = P2^3;
uchar num;
uchar code table[]={
0x3f,0x06,0x5b,0x4f,
0x66,0x6d,0x7d,0x07,
0x7f,0x6f,0x77,0x7c,
0x39,0x5e,0x79,0x71};
void delay(uint z);
void main()
{
while(1)
{
  for(num=0;num<16;num++)
{
P0=table[num];
P2_0=0;
P2_0=1;

P0=table[num];
P2_1=0;
P2_1=1;
P0=table[num];
P2_2=0;
P2_2=1;
P0=table[num];
P2_3=0;
P2_3=1;
delay(1000);
}
}
}
void delay(uint z)
{
uint x,y;
for(x=z;x>0;x--)
  for(y=110;y>0;y--);
}

程序②：
#include <reg52.h>
#define uchar unsigned char
#define uint unsigned int
sbit P2_0 = P2^0;
sbit P2_1 = P2^1;
sbit P2_2 = P2^2;
sbit P2_3 = P2^3;
uchar num;
uchar code table[]={0xc0,0xf9,0xa4,0xb0,0x99,0x92,0x82,
                     0xf8,0x80,0x90};
void delay(uint z);
void main()
{

while(1)
{

for(num=0;num<16;num++)
{
   P0=table[num];
   P2_0 = 0;
   P2_0 = 1;
   P0=table[num];
   P2_1 = 0;
   P2_1 = 1;
   P0=table[num];
   P2_2 = 0;
   P2_2 = 1;
   P0=table[num];
   P2_3 = 0;
   P2_3 = 1;
   delay(1000);
}

}
}
void delay(uint z)
{
uint x,y;
for(x=z;x>0;x--)
  for(y=110;y>0;y--);
}

ID:213173 · 發表于 2018-4-15 07:04

4個數碼管顯示相同數字
#include <reg52.h>
#define uchar unsigned char
#define uint unsigned int
uchar code table[]={ //共陽數碼管段碼"0~f"
0xc0,0xf9,0xa4,0xb0,
0x99,0x92,0x82,0xf8,
0x80,0x90,0x88,0x83,
0xc6,0xa1,0x86,0x8e};

void delay(uint z)
{
uint x,y;
for(x=z;x>0;x--)
   for(y=110;y>0;y--);
}

void main()
{
uchar num;
P2 &= 0xf0;
while(1)
{
   for(num=0;num<16;num++)
   {
      P0=table[num];
      delay(1000);
   }
}
}

ID:304233 · 發表于 2018-4-15 22:21

wulin 發表于 2018-4-15 07:04
4個數碼管顯示相同數字
#include
#define uchar unsigned char

謝謝你！

帳號		自動登錄	找回密碼
密碼			立即注冊

想要數碼管從0到f切換，但是沒成功

想要數碼管從0到f切換，但是沒成功