找回密碼
 立即注冊

QQ登錄

只需一步，快速開始

搜索
查看: 4041|回復: 1
收起左側

Arduino加語音芯片硬件資料 控制多路電器源程序

[復制鏈接]
ID:313638 發表于 2020-9-25 11:48 | 顯示全部樓層 |閱讀模式
Arduino用語音控制10多路電器硬件資料
Arduino 加語音控制芯片控制多路電器（程序見附件），注：語音芯片HLK-V20本身自帶3路控制輸出引腳，使用本程序能多控制了10多路電器。
51hei.png
IMG_20200925_084749.jpg IMG_20200925_083916.jpg IMG_20200925_083824.jpg IMG_20200925_083733.jpg IMG_20200925_083651.jpg HLK-V20語音芯片擴展控制程序硬件連接實物圖.jpg

  1. #include <SoftwareSerial.h>

  3. SoftwareSerial mySerial(2,3);
  4. String receive_data;

  6. void setup(){
  7.   mySerial.begin(115200);
  8.   Serial.begin(115200);
  9.   receive_data = "";
  10.   pinMode(4, OUTPUT);
  11.   pinMode(5, OUTPUT);
  12.   pinMode(6, OUTPUT);
  13.   pinMode(7, OUTPUT);
  14.   pinMode(8, OUTPUT);
  15.   pinMode(9, OUTPUT);
  16.   pinMode(10, OUTPUT);
  17.   pinMode(11, OUTPUT);
  18.   pinMode(12, OUTPUT);
  19.   pinMode(13, OUTPUT);
  20. }

  22. void loop(){
  23.   while (mySerial.available() > 0) {
  24.     receive_data = String(receive_data) + String(char(mySerial.read()));
  25.   }
  26.   if (String(receive_data).indexOf(String("dakainuanqi")) != -1) {
  27.     digitalWrite(4,HIGH);
  28.     Serial.println("打開暖氣");
  29.     receive_data = "";

  31.   } else if (String(receive_data).indexOf(String("guanbinuanq")) != -1) {
  32.     digitalWrite(4,LOW);
  33.     Serial.println("關閉暖氣");
  34.     receive_data = "";
  35.   }
  36.   if (String(receive_data).indexOf(String("dakaicfeng")) != -1) {
  37.     digitalWrite(5,HIGH);
  38.     Serial.println("打開吹風");
  39.     receive_data = "";

  41.   } else if (String(receive_data).indexOf(String("guanbicfeng")) != -1) {
  42.     digitalWrite(5,LOW);
  43.     Serial.println("關閉吹風");
  44.     receive_data = "";
  45.   }
  46.   if (String(receive_data).indexOf(String("dakdianfangbao")) != -1) {
  47.     digitalWrite(6,HIGH);
  48.     Serial.println("打開電飯煲");
  49.     receive_data = "";

  51.   } else if (String(receive_data).indexOf(String("guabdianfangbao")) != -1) {
  52.     digitalWrite(6,LOW);
  53.     Serial.println("關閉電飯煲");
  54.     receive_data = "";
  55.   }
  56.   if (String(receive_data).indexOf(String("turnon")) != -1) {
  57.     digitalWrite(7,HIGH);
  58.     Serial.println("打開臺燈");
  59.     receive_data = "";

  61.   } else if (String(receive_data).indexOf(String("turnoff")) != -1) {
  62.     digitalWrite(7,LOW);
  63.     Serial.println("關閉臺燈");
  64.     receive_data = "";
  65.   }
  66.   if (String(receive_data).indexOf(String("openElectricfan")) != -1) {
  67.     digitalWrite(8,HIGH);
  68.     Serial.println("打開風扇");
  69.     receive_data = "";

  71.   } else if (String(receive_data).indexOf(String("closElectricfan")) != -1) {
  72.     digitalWrite(8,LOW);
  73.     Serial.println("關閉風扇");
  74.     receive_data = "";
  75.   }
  76.   if (String(receive_data).indexOf(String("openled")) != -1) {
  77.     digitalWrite(9,HIGH);
  78.     Serial.println("開燈");
  79.     receive_data = "";

  81.   } else if (String(receive_data).indexOf(String("closeled")) != -1) {
  82.     digitalWrite(9,LOW);
  83.     Serial.println("關燈");
  84.     receive_data = "";
  85.   }
  86.   if (String(receive_data).indexOf(String("dakaiyuba")) != -1) {
  87.     digitalWrite(10,HIGH);
  88.     Serial.println("打開浴霸");
  89.     receive_data = "";

  91.   } else if (String(receive_data).indexOf(String("guanbiyuba")) != -1) {
  92.     digitalWrite(10,LOW);
  93.     Serial.println("關閉浴霸");
  94.     receive_data = "";
  95.   }
  96.   if (String(receive_data).indexOf(String("dakaizaoming")) != -1) {
  97.     digitalWrite(11,HIGH);
  98.     Serial.println("打開照明");
  99.     receive_data = "";

  101.   } else if (String(receive_data).indexOf(String("guanbizhaoming")) != -1) {
  102.     digitalWrite(11,LOW);
  103.     Serial.println("關閉照明");
  104.     receive_data = "";
  105.   }
  106.   if (String(receive_data).indexOf(String("dakaiyingsji")) != -1) {
  107.     digitalWrite(12,HIGH);
  108.     Serial.println("打開飲水機");
  109.     receive_data = "";

  111.   } else if (String(receive_data).indexOf(String("guanbiyingsji")) != -1) {
  112.     digitalWrite(12,LOW);
  113.     Serial.println("關閉飲水機");
  114.     receive_data = "";
  115.   }
  116.   if (String(receive_data).indexOf(String("kaishichus")) != -1) {
  117.     digitalWrite(13,HIGH);
  118.     Serial.println("開始出水");
  119.     receive_data = "";

  121.   } else if (String(receive_data).indexOf(String("tingzchus")) != -1) {
  122.     digitalWrite(13,LOW);
  123.     Serial.println("停止出水");
  124.     receive_data = "";
  125.   }
  126.   if (String(receive_data).indexOf(String("zengjialiangdu")) != -1) {
  127.     pinMode(A0, OUTPUT);
  128.     digitalWrite(A0,HIGH);
  129.     Serial.println("增加亮度");
  130.     receive_data = "";

  132.   } else if (String(receive_data).indexOf(String("jianxiaoliangdu")) != -1) {
  133.     pinMode(A0, OUTPUT);
  134.     digitalWrite(A0,LOW);
  135.     Serial.println("減小亮度");
  136.     receive_data = "";
  137.   }
  138.   if (String(receive_data).indexOf(String("settiConehonor")) != -1) {
  139.     pinMode(A2, OUTPUT);
  140.     digitalWrite(A2,HIGH);
  141.     Serial.println("一小時后開機");
  142.     receive_data = "";

  144.   } else if (String(receive_data).indexOf(String("settiOonehonor")) != -1) {
  145.     pinMode(A2, OUTPUT);
  146.     digitalWrite(A2,LOW);
  147.     Serial.println("一小時后關機");
  148.     receive_data = "";
  149.   }
  150.   if (String(receive_data).indexOf(String("shenggaowendu")) != -1) {
  151.     pinMode(A3, OUTPUT);
  152.     digitalWrite(A3,HIGH);
  153.     Serial.println("升高溫度");
  154.     receive_data = "";

  156.   } else if (String(receive_data).indexOf(String("jiandiwendu")) != -1) {
  157.     pinMode(A3, OUTPUT);
  158.     digitalWrite(A3,LOW);
  159.     Serial.println("降低溫度");
  160.     receive_data = "";
  161.   }
  162.   if (String(receive_data).indexOf(String("AdjustGearmax")) != -1) {
  163.     pinMode(A4, OUTPUT);
  164.     digitalWrite(A4,HIGH);
  165.     Serial.println("風速調到最大");
  166.     receive_data = "";

  168.   } else if (String(receive_data).indexOf(String("AdjustGearmin")) != -1) {
  169.     pinMode(A1, OUTPUT);
  170.     digitalWrite(A1,LOW);
  171.     Serial.println("風速調到最小");
  172.     receive_data = "";
  173.   }
  174.   if (String(receive_data).indexOf(String("volumeUpUni")) != -1) {
  175.     pinMode(A5, OUTPUT);
  176.     digitalWrite(A5,HIGH);
  177.     Serial.println("增大音量");
  178.     receive_data = "";

  180.   } else if (String(receive_data).indexOf(String("volumeDownUni")) != -1) {
  181.     pinMode(A2, OUTPUT);
  182.     digitalWrite(A2,LOW);
  183.     Serial.println("減小音量");
  184.     receive_data = "";
  185.   }

  187. }
復制代碼

HLK-V20 Demo固件命令詞與播報詞 V1.1.xlsx.7z (12.64 KB, 下載次數: 27)
回復

使用道具 舉報

ID:493780 發表于 2020-11-2 21:42 | 顯示全部樓層
好哇，一直都想把這個模塊用起來，感謝大佬的分享
回復

使用道具 舉報

您需要登錄后才可以回帖 登錄 | 立即注冊

本版積分規則

手機版|小黑屋|51黑電子論壇 |51黑電子論壇6群 QQ 管理員QQ:125739409;技術交流QQ群281945664

Powered by 單片機教程網

快速回復 返回頂部 返回列表