51單片機74ls595控制16*32點陣屏顯示走字屏，附帶源碼以及Proteus仿真

ID:842954 · 發表于 2020-11-13 10:09

仿真原理圖如下（proteus仿真工程文件可到本帖附件中下載）

單片機源程序如下:
#include <reg51.h>
#define uchar unsigned char
#define uint unsigned int

sbit SRCLK=P2^0;//hang
sbit RCLK=P2^1;
sbit SER=P2^2;

sbit SRCLK2=P0^0;//lie
sbit RCLK2=P0^1;
sbit SER2=P0^2;

//字模格式 16x16  陰碼，逐行，逆向，十六進制，C51格式

uint code temp[]={
0x18,0x18,0x30,0x0C,0x60,0x06,0xFC,0x3F,
0x8C,0x31,0x8C,0x31,0xFC,0x3F,0x8C,0x31,
0x8C,0x31,0xFC,0x3F,0x80,0x01,0x80,0x01,
0xFF,0xFF,0x80,0x01,0x80,0x01,0x80,0x01,/*"單",0*/

0x00,0x06,0x18,0x06,0x18,0x06,0x18,0x06,
0x18,0x06,0xF8,0x7F,0x18,0x00,0x18,0x00,
0x18,0x00,0xF8,0x0F,0x18,0x0C,0x18,0x0C,
0x18,0x0C,0x0C,0x0C,0x0C,0x0C,0x06,0x0C,/*"片",1*/

0x18,0x00,0x98,0x1F,0x98,0x19,0x98,0x19,
0xFF,0x19,0x98,0x19,0x9C,0x19,0xBC,0x19,
0xFE,0x19,0xFE,0x19,0x9B,0x19,0x98,0xD9,
0x98,0xD9,0xD8,0xD8,0xD8,0xF0,0x78,0x00,/*"機",2*/

0xC0,0x00,0x80,0x01,0x80,0x01,0xFF,0xFF,
0x00,0x00,0x18,0x18,0x18,0x30,0x0C,0x6C,
0x36,0x6C,0x60,0x06,0xC0,0x03,0x80,0x01,
0xC0,0x03,0x70,0x06,0x1C,0x1C,0x07,0xF0,/*"交",3*/

0x00,0x03,0x0C,0x06,0xF8,0xFF,0x18,0x03,
0x83,0x19,0xC6,0x30,0xE6,0x7F,0x18,0x60,
0x18,0x00,0xCC,0x36,0xCF,0x36,0xCC,0x36,
0xCC,0x36,0xCC,0xF6,0x6C,0xF6,0x30,0xE6,/*"流",4*/

0x00,0xC3,0xFE,0x66,0xD8,0x3C,0xD8,0xFF,
0xFF,0x19,0xD8,0x18,0xD8,0x18,0xFE,0x7E,
0x0C,0x18,0x0C,0x18,0xFE,0x18,0xCE,0xFF,
0xCF,0x18,0xCC,0x18,0xFC,0x18,0xCC,0x18,/*"群",5*/

0x00,0x00,0x00,0x7C,0xC6,0xC6,0xC6,0xC0,
0x60,0x30,0x18,0x0C,0xC6,0xFE,0x00,0x00,/*"2",6*/

0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,/*" ",7*/

0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,/*" ",8*/
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,/*" ",9*/
};

uint code table1[]={
0xfffe,0xfffd,0xfffb,0xfff7,0xffef,0xffdf,0xffbf,0xff7f,
0xfeff,0xfdff,0xfbff,0xf7ff,0xefff,0xdfff,0xbfff,0x7fff};

//void delay(uint a)
//{
//  uint i,j;
//       for(i=a;i>0;i--)
//       for(j=10;j>0;j--);
//}

void Hang_595(uint dat)//hang
{
      uint i=0;
      RCLK=0;
      for(i=0;i<16;i++)
      {
            SER=dat&0x8000;
            dat<<=1;
            SRCLK=1;
            SRCLK=0;
      }
      RCLK=1;
      RCLK=0;
      }

void Line_595(uchar numL,uchar numH)//lie
{
      uint dat2=0X8001;
uint i=0;
      RCLK2=0;

      dat2=numH;
      dat2<<=8;
      dat2|=numL;

      for(i=0;i<16;i++)
      {
            SRCLK2=0;
            SER2=dat2&0x8000;
            dat2<<=1;
            SRCLK2=1;
            SRCLK2=0;
      }
      RCLK2=1;
      RCLK2=0;
}

void main()
{
      uchar v;
      uchar t;
      uint g;
  Hang_595(0);

      while(1)
      {

            for(g=0;g<140;g++)             //一個字是16，字?jǐn)?shù)乘以16
            for(v=0;v<30;v++)
                     for(t=0;t<16;t++)
                     {
                              Hang_595(table1[t]);
                              Line_595(temp[(g+t)*2],temp[(g+t)*2+1]);
                              Line_595(0,0);
                     }
      }

}

全部資料51hei下載地址：

走字屏.rar (56.37 KB, 下載次數: 75)

ID:864177 · 發表于 2021-6-21 18:50

可以問下您怎么換個方向顯示和加快滾動嗎

帳號		自動登錄	找回密碼
密碼			立即注冊

51單片機74ls595控制16*32點陣屏顯示走字屏，附帶源碼以及Proteus仿真

評分

51單片機74ls595控制16*32點陣屏顯示走字屏，附帶源碼以及Proteus仿真