#include "led.h"
#include "delay.h"
#include "key.h"
#include "sys.h"
#include "lcd.h"
#include "usart.h"
#include "remote.h"
int main(void)
{
u8 key;
u8 t=0;
u8 *str=0;
delay_init(); //延時函數初始化
NVIC_PriorityGroupConfig(NVIC_PriorityGroup_2);//設置中斷優先級分組為組2：2位搶占優先級，2位響應優先級
uart_init(115200); //串口初始化為115200
LED_Init(); //LED端口初始化
LCD_Init();
KEY_Init();
Remote_Init(); //紅外接收初始化
POINT_COLOR=RED; //設置字體為紅色
LCD_ShowString(30,50,200,16,16,"WarShip STM32");
LCD_ShowString(30,70,200,16,16,"REMOTE TEST");
LCD_ShowString(30,90,200,16,16,"ATOM@ALIENTEK");
LCD_ShowString(30,110,200,16,16,"2015/1/15");
LCD_ShowString(30,130,200,16,16,"KEYVAL:");
LCD_ShowString(30,150,200,16,16,"KEYCNT:");
LCD_ShowString(30,170,200,16,16,"SYMBOL:");
while(1)
{
key=Remote_Scan();
if(key)
{
LCD_ShowNum(86,130,key,3,16); //顯示鍵值
LCD_ShowNum(86,150,RmtCnt,3,16); //顯示按鍵次數
switch(key)
{
case 0:str="ERROR";break;
case 162:str="POWER";break;
case 98:str="UP";break;
case 2:str="PLAY";break;
case 226:str="ALIENTEK";break;
case 194:str="RIGHT";break;
case 34:str="LEFT";break;
case 224:str="VOL-";break;
case 168:str="DOWN";break;
case 144:str="VOL+";break;
case 104:str="1";break;
case 152:str="2";break;
case 176:str="3";break;
case 48:str="4";break;
case 24:str="5";break;
case 122:str="6";break;
case 16:str="7";break;
case 56:str="8";break;
case 90:str="9";break;
case 66:str="0";break;
case 82:str="DELETE";break;
}
LCD_Fill(86,170,116+8*8,170+16,WHITE); //清楚之前的顯示
LCD_ShowString(86,170,200,16,16,str); //顯示SYMBOL
}else delay_ms(10);
t++;
if(t==20)
{
t=0;
LED0=!LED0;
}
}
}
|
