|
|
#ifndef __EEPROM_H__
#define __EEPROM_H__
#include "stc8hxx.h"
#include "intrins.h"
union u16_2char
{
unsigned char p[2];
unsigned int num;
};
//從某扇區讀取一個2字節數據
unsigned int Read_EEPROM_u16(unsigned int add);
//在某個地址所在扇區保存一個2字節數據
void Save_EEPROM_u16(unsigned int add,unsigned int dat);
//在EEPROM里面一次性寫入20個數據
void Wr_20_Long(unsigned int addr,long *dat);
//在EEPROM里面一次性讀取20個數據
void Re_20_Long(unsigned int addr,long *dat);
#endif
#include "EEPROM.h"
void IapIdle()
{
IAP_CONTR = 0; //關閉IAP功能
IAP_CMD = 0; //清除命令寄存器
IAP_TRIG = 0; //清除觸發寄存器
IAP_ADDRH = 0x80; //將地址設置到非IAP區域
IAP_ADDRL = 0; //清徐IAP地址
}
//讀取某地址一個字節
unsigned char Read_One_Byte(unsigned int addr) //讀IAP數據
{
unsigned char dat;
IAP_CONTR = 0x80; //使能IAP
IAP_TPS = 12; //設置等待參數12MHz
IAP_CMD = 1; //設置IAP讀命令
IAP_ADDRL = addr; //設置IAP低地址
IAP_ADDRH = addr >> 8; //設置IAP高地址
IAP_TRIG = 0x5a; //寫觸發命令(0x5a)
IAP_TRIG = 0xa5; //寫觸發命令(0xa5)
_nop_(); // 延時等待發送完成
dat = IAP_DATA; //讀IAP數據
IapIdle(); //關閉IAP功能
return dat;
}
//在某地址寫入一個字節
void Write_One_Byte(unsigned int addr,unsigned char dat) //寫IAP數據
{
IAP_CONTR = 0x80; //使能IAP
IAP_TPS = 12; //設置等待參數12MHz
IAP_CMD = 2; //設置IAP寫命令
IAP_ADDRL = addr; //設置IAP低地址
IAP_ADDRH = addr >> 8; //設置IAP高地址
IAP_DATA = dat; //寫IAP數據
IAP_TRIG = 0x5a; //寫觸發命令(0x5a)
IAP_TRIG = 0xa5; //寫觸發命令(0xa5)
_nop_(); // 延時等待發送完成
IapIdle(); //關閉IAP功能
}
//擦除某地址所在的扇區
void Erase_IAP(unsigned int addr) //IAP擦除
{
IAP_CONTR = 0x80; //使能IAP
IAP_TPS = 12; //設置等待參數12MHz
IAP_CMD = 3; //設置IAP擦除命令
IAP_ADDRL = addr; //設置IAP低8位地址
IAP_ADDRH = addr >> 8; //設置IAP高8位地址
IAP_TRIG = 0x5a; //寫觸發命令(0x5a)
IAP_TRIG = 0xa5; //寫觸發命令(0xa5)
_nop_(); // 延時等待發送完成
IapIdle(); //關閉IAP功能
}
//在某個地址所在扇區保存一個2字節數據
void Save_EEPROM_u16(unsigned int add,unsigned int dat)
{
unsigned int addr = 0;
union u16_2char dat1;
addr = add;
dat1.num = dat;
addr = add * 256 + 1;//非IAP系列單片機，直接輸入扇區地址用的
Erase_IAP(addr);//擦除當前扇區
Write_One_Byte(addr,dat1.p[0]);//保存的高字節在前
Write_One_Byte(addr+1,dat1.p[1]);
// Write_One_Byte(addr+2,dat1.p[2]);
// Write_One_Byte(addr+3,dat1.p[3]);
}
//從某扇區讀取一個2字節數據
unsigned int Read_EEPROM_u16(unsigned int add)
{
unsigned int addr = 0;
union u16_2char dat1;
addr = add;
dat1.p[0] = Read_One_Byte(addr);
dat1.p[1] = Read_One_Byte(addr+1);
// dat1.p[2] = Read_One_Byte(addr+2);
// dat1.p[3] = Read_One_Byte(addr+3);
return dat1.num;
}
//在EEPROM里面一次性寫入20個數據
void Wr_20_unsignedint(unsigned int addr,unsigned int *dat)
{
unsigned int addr2=0;
unsigned char a=0;
addr2 = addr;
Erase_IAP(addr2);//擦除當前扇區
for(a=0;a<20;a++)
{
Save_EEPROM_u16 (addr2,dat[a]);
addr2 += 2;
}
}
//在EEPROM里面一次性讀取20個數據
void Re_20_unsignedint(unsigned int addr,unsigned int *dat)
{
unsigned int addr2=0;
unsigned char a=0;
addr2 = addr;
for(a=0;a<20;a++)
{
dat[a] = Read_EEPROM_u16(addr2);
addr2 += 2;
}
}
這樣改好像不對呀？請高人指點！ |
|
