|
|
OV7670攝像頭的定位算法，融合測試 ，資源共享，共同進步
0.png (68.13 KB, 下載次數: 116)
下載附件
2016-10-31 01:02 上傳
程序打包下載：
攝像頭.rar
(4.68 MB, 下載次數: 187)
2016-8-5 00:00 上傳
點擊文件名下載附件
下載積分: 黑幣 -5
下面是主程序預覽：
- #include <stm32f10x.h>
- #include "Nvic_Exit.h"
- #include "ov7670.h"
- #include "I2C.h"
- #include "ILI9325_32.h"
- #include "GUI_32.h"
- #include "delay.h"
- #include "led.h"
- #include "data_conf.h"
- #include "PictureAnalyse.h"
- #include "Tim1.h"
- /*
- 用到的模塊
- 1：IIC 對應端口初始化
- 2：OV7670寄存器初始化+端口初始化
- 3：添加FIFO.C輔助端口初始化，并且添加RRST()和WRST()兩個初始化函數
- 4：外部中斷初始化
- 5：LED指示燈初始化
- 6：延時初始化
- 7: 串口初始化 測試用
- 程序邏輯
- */
- extern Picture_Control PictureContorl;
- int main()
- {
- LED_GPIO_Config();//指示燈初始化
- delay_init(72);//延時初始化
- ILI9325_initial();//TFT端口初始化
- Anal_I2C_Init();//IIC初始化
- ov7670_PortConfig();//攝像頭模塊引腳初始化//對RCK,WR,OE,WRST,RRST進行了端口設置
- Cmos7670_init();//配置寄存
- GUI_clearscreen(0xffff);//清屏
- GUI_sprintf_string(50, 100,"TFT Init Successful !", 0x0000,0xffff); //顯示初始化
- GUI_clearscreen(0xffff);//清屏
- Exit_Init(GPIOC, GPIO_Pin_12, GPIO_Mode_IPU, EXTI_Trigger_Falling, 0, 0); //VSYNC //外部中斷初始化
- // TakeVerfPhoto();
- TIM1_Init();
- GUI_sprintf_string(10,50,"ERROR:",0x0000,0xffff);
- GUI_sprintf_string(10,100,"ERROR_Verf:",0x0000,0xffff);
- GUI_sprintf_string(10,150,"+offset:",0x0000,0xffff);
- GUI_sprintf_string(10,200,"-offset:",0x0000,0xffff);
- GUI_sprintf_string(10,250,"RunTime:",0x0000,0xffff);
- while(1)
- {
- GUI_wrul(200,50,PictureContorl.Control_Value,0x0000,0xffff); //刷新控制?
- GUI_wrul(200,100,PictureContorl.Control_Value_Verf,0x0000,0xffff); //刷新控制量
- if(PictureContorl.Control_Value-PictureContorl.Control_Value_Verf>0)
-
- GUI_wrul(200,150,(PictureContorl.Control_Value-PictureContorl.Control_Value_Verf),0x0000,0xffff); //刷新控制量
- else
- GUI_wrul(200,200,(PictureContorl.Control_Value_Verf-PictureContorl.Control_Value),0x0000,0xffff); //刷新控制量
- GUI_wrul(200,250,PictureContorl.Control_Value,0x0000,0xffff); //刷新控制?
-
- }
- }
|
|
[復制鏈接]
QQ好友和群
QQ空間
騰訊微博
騰訊朋友
收藏
淘帖
頂
踩
