本帖最后由 @lins 于 2017-8-8 18:45 編輯
#include "pid.h"
#include "sys.h"
PIDtypedef PID1; //PID結構體
PIDtypedef PID2;
PIDtypedef PID3;
PIDtypedef PID4;
/*------------------------------------------
函數功能:PID單元 參數初始化程序
函數說明:
------------------------------------------*/
void incPIDinit(void)
{
//PID1參數初始化
PID1.sum_error=0;
PID1.last_error=0;
PID1.prev_error=0;
PID1.proportion=0;
PID1.integral=0;
PID1.derivative=0;
PID1.setpoint=0;
//PID2參數初始化
PID2.sum_error=0;
PID2.last_error=0;
PID2.prev_error=0;
PID2.proportion=0;
PID2.integral=0;
PID2.derivative=0;
PID2.setpoint=0;
//PID3參數初始化
PID3.sum_error=0;
PID3.last_error=0;
PID3.prev_error=0;
PID3.proportion=0;
PID3.integral=0;
PID3.derivative=0;
PID3.setpoint=0;
//PID4參數初始化
PID4.sum_error=0; //增量疊加
PID4.last_error=0; //當前誤差
PID4.prev_error=0; //上一個誤差
PID4.proportion=0; //比例
PID4.integral=0; //積分
PID4.derivative=0; //微分
PID4.setpoint=0; //設定值
}
/*------------------------------------------
函數功能:預期值設定
函數說明:
------------------------------------------*/
void PID_setpoint(PIDtypedef*PIDx,u16 setvalue)
{
PIDx->setpoint=setvalue; //設定值
}
/*------------------------------------------
函數功能:PID增量式計算公式
函數說明:PID=Uk+KP*(E(k)-E(k-1))+KI*E(k)+KD*(E(k)-2E(k-1)+E(k-2))
------------------------------------------*/
int incPIDcalc(PIDtypedef *PIDx,u16 nextpoint)
{
float iError,iincpid;
iincpid=
PIDx->proportion*(iError-PIDx->last_error)
+PIDx->integral*iError
+PIDx->derivative*(iError-2*PIDx->last_error+PIDx->prev_error);
PIDx->prev_error=PIDx->last_error; //存儲誤差，便于下次計算
PIDx->last_error=iError;
PIDx->sum_error+=iincpid;
return(PIDx->sum_error) ;
}
/*------------------------------------------
函數功能:PID 參數設置
函數說明:
------------------------------------------*/
void PIDset(PIDtypedef *PIDx,float P,float I,float D)
{
PIDx->proportion=P;
PIDx->integral=I;
PIDx->derivative=D;
}
|
